Single Supply, Low Power Triple Video Amplifier

PRODUCT DESCRIPTION The AD813 is a low power, single supply triple video amplifier. Each of the three current feedback amplifiers has 50 mA of output current, and is optimized for driving one back-terminated video load (150 Ω). The AD813 features gain flatness of 0.1 dB to 50 MHz while offering d

单电源、低功耗、三通道视频放大器

AD813是一款低功耗、单电源、三通道视频放大器。各电流反馈型放大器均提供50 mA输出电流，适合驱动一个后部端接的视频负载(150 W) 。0.1 dB增益平坦度为50 MHz，同时差分增益和相位误差分别为0.03%和0.06°。因此，AD813堪称广播和消费类视频电子设备的理想之选。AD813每个放大器的最大功耗低至5.5 mA，并且可以采用+3 V单电源供电。各放大器的输出摆幅在任一供电轨的1 V范围以内，处理视频信号轻松自如。采用+5 V单电源供电时，AD813仍能达到20 MHz的0.1 dB平坦度，同时差分增益和相位性能分别为0.05%/0.05°。该器件提供14引 • 低成本\n\n• 一个封装中集成三个视频放大器\n\n• 针对视频系统中的电缆驱动进行优化\n\n• 出色的视频特性 (RL = 150 W)\n0.1 dB增益平坦度：50 MHz\n差分增益误差：0.03%\n差分相位误差：0.06°\n\n• 低功耗\n采用+3 V至±15 V单电源供电\n电源电流：每个放大器5.5 mA（最大值）\n\n• 高速\n-3 dB带宽：125 MHz（单位增益）\n压摆率：500 V/µs\n\n• 各通道均提供高速禁用功能\n关闭时间：80 ns\n\n• 易于使用\n输出电流：50 mA\n输出摆幅：供电轨1 V范围内;

Single Supply, Low Power Triple Video Amplifier

文件：394.04 Kbytes Page：19 Pages

Single Supply, Low Power Triple Video Amplifier

文件：586.17 Kbytes Page：20 Pages

Single Supply, Low Power Triple Video Amplifier

文件：394.04 Kbytes Page：19 Pages

Low-Cost 270 MHz Differential Receiver Amplifiers

GENERAL DESCRIPTION The AD8129/AD8130 are designed as receivers for the transmission of high speed signals over twisted-pair cables to work with the AD8131 or AD8132 drivers. Either can be used for analog or digital video signals and for high speed data transmission. The AD8129/AD8130 are di

Low-Cost 270 MHz Differential Receiver Amplifiers

GENERAL DESCRIPTION The AD8129/AD8130 are designed as receivers for the transmission of high speed signals over twisted-pair cables to work with the AD8131 or AD8132 drivers. Either can be used for analog or digital video signals and for high speed data transmission. The AD8129/AD8130 are di

Low-Cost 270 MHz Differential Receiver Amplifiers

GENERAL DESCRIPTION The AD8129/AD8130 are designed as receivers for the transmission of high speed signals over twisted-pair cables to work with the AD8131 or AD8132 drivers. Either can be used for analog or digital video signals and for high speed data transmission. The AD8129/AD8130 are di

Low-Cost 270 MHz Differential Receiver Amplifiers

GENERAL DESCRIPTION The AD8129/AD8130 are designed as receivers for the transmission of high speed signals over twisted-pair cables to work with the AD8131 or AD8132 drivers. Either can be used for analog or digital video signals and for high speed data transmission. The AD8129/AD8130 are di

Low-Cost 270 MHz Differential Receiver Amplifiers

GENERAL DESCRIPTION The AD8129/AD8130 are designed as receivers for the transmission of high speed signals over twisted-pair cables to work with the AD8131 or AD8132 drivers. Either can be used for analog or digital video signals and for high speed data transmission. The AD8129/AD8130 are di

Low-Cost 270 MHz Differential Receiver Amplifiers

GENERAL DESCRIPTION The AD8129/AD8130 are designed as receivers for the transmission of high speed signals over twisted-pair cables to work with the AD8131 or AD8132 drivers. Either can be used for analog or digital video signals and for high speed data transmission. The AD8129/AD8130 are di

Low-Cost 270 MHz Differential Receiver Amplifiers

GENERAL DESCRIPTION The AD8129/AD8130 are designed as receivers for the transmission of high speed signals over twisted-pair cables to work with the AD8131 or AD8132 drivers. Either can be used for analog or digital video signals and for high speed data transmission. The AD8129/AD8130 are di

Evaluation Board for the ADF5901, ADF5904, and ADF4159 Chipset for a 24 GHz FMCW Radar

FEATURES Evaluates the chipset containing the ADF5901 24 GHz Tx MMIC, the ADF5904 24 GHz Rx MMIC, the ADF4159 13 GHz PLL Accompanying software controls all functions from a PC GENERAL DESCRIPTION The EV-RADAR-MMIC2 evaluation board is designed to evaluate the performance of the ADF5901, a 24

Low-Cost 270 MHz Differential Receiver Amplifiers

GENERAL DESCRIPTION The AD8129/AD8130 are designed as receivers for the transmission of high speed signals over twisted-pair cables to work with the AD8131 or AD8132 drivers. Either can be used for analog or digital video signals and for high speed data transmission. The AD8129/AD8130 are di

Low-Cost, High-Speed Differential Driver

GENERAL DESCRIPTION The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2. The AD8131 is a major advancement over op amps for driving signals over long lines or for driving differential input ADCs. The AD8131 has a

Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

低成本、高速差分驱动器

AD8131是一款差分或单端输入至差分输出驱动器，无需外部元件就能获得固定增益2。相对于运算放大器，AD8131在驱动长线路信号或驱动差分输入ADC方面取得了重大进步。它具有独特的内部反馈特性，在10MHz时可提供于−68 dB达到平衡的输出增益和相位匹配，能够降低辐射电磁干扰(EMI)并抑制谐波。AD8131采用ADI公司的新一代XFCB双极性工艺制造，-3 dB带宽为400 MHz，提供差分信号，且谐波失真非常低。\n\n AD8131可用作通过低成本双绞线或同轴电缆实现高速信号传输的差分驱动器，可以用于模拟、数字视频信号或其它高速数据信号的传输。AD8131驱动器能够驱动3类、 • 高速\n-3 dB全功率带宽：400 MHz\n压摆率：2000 V/µs\n\n• 固定增益：2，无需外部元件\n\n• 内部共模反馈可改善增益和相位平衡：–60 dB (10 MHz);

Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

Low-Cost, High-Speed Differential Driver

GENERAL DESCRIPTION The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2. The AD8131 is a major advancement over op amps for driving signals over long lines or for driving differential input ADCs. The AD8131 has a

Low-Cost, High-Speed Differential Driver

GENERAL DESCRIPTION The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2. The AD8131 is a major advancement over op amps for driving signals over long lines or for driving differential input ADCs. The AD8131 has a

丝印代码：HJA；Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

丝印代码：HJA；Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

Low-Cost, High-Speed Differential Driver

GENERAL DESCRIPTION The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2. The AD8131 is a major advancement over op amps for driving signals over long lines or for driving differential input ADCs. The AD8131 has a

Low-Cost, High-Speed Differential Driver

GENERAL DESCRIPTION The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2. The AD8131 is a major advancement over op amps for driving signals over long lines or for driving differential input ADCs. The AD8131 has a

丝印代码：HJA；Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

丝印代码：HJA；Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

丝印代码：HJA；Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

丝印代码：HJA；Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

Low-Cost, High-Speed Differential Driver

GENERAL DESCRIPTION The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2. The AD8131 is a major advancement over op amps for driving signals over long lines or for driving differential input ADCs. The AD8131 has a

Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

Low-Cost, High-Speed Differential Driver

GENERAL DESCRIPTION The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2. The AD8131 is a major advancement over op amps for driving signals over long lines or for driving differential input ADCs. The AD8131 has a

Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

Low Cost, High Speed Differential Driver

FEATURES High speed 400 MHz, −3 dB full power bandwidth 2000 V/μs slew rate Fixed gain of 2 with no external components Internal common-mode feedback to improve gain and phase balance: −60 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: 68 dB SFDR @ 5 MHz 2

Low-Cost, High-Speed Differential Driver

GENERAL DESCRIPTION The AD8131 is a differential or single-ended input to differential output driver requiring no external components for a fixed gain of 2. The AD8131 is a major advancement over op amps for driving signals over long lines or for driving differential input ADCs. The AD8131 has a

Low-Cost, High-Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

Low Cost, High Speed Differential Amplifier

FEATURES High speed 350 MHz, −3 dB bandwidth 1200 V/μs slew rate Resistor set gain Internal common-mode feedback Improved gain and phase balance: −68 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: −99 dBc SFDR @ 5 MHz, 800 Ω load Low power: 10.7 mA @ 5 V

低成本、高速差分放大器

AD8132是一款低成本、差分或单端输入至差分输出放大器，通过电阻设置增益。相对于运算放大器，AD8132在驱动差分输入ADC或驱动信号长线路传输方面取得了重大进步。它具有独特的内部反馈特性，在10 MHz时可提供于−68 dB达成的输出增益和相位匹配平衡，能够抑制谐波并降低辐射电磁干扰(EMI)。\n\n AD8132采用ADI公司新一代XFCB双极性工艺制造，−3 dB带宽为350 MHz，提供差分信号，5 MHz时的无杂散动态范围(SFDR)为−99 dBc，而且成本低廉。该器件无需使用具有高性能ADC的变压器，并保留低频和直流信息。在VOCM引脚上施加电压便可调整差分输出的共 • 高速\n-3 dB带宽：350 MHz\n压摆率：1200 V/μs\n\n• 通过电阻设置增益\n\n• 内部共模反馈\n\n• 改进的增益和相位平衡：-68 dB (10 MHz)\n\n• 利用单独的输入设置共模输出电压\n\n• 低失真：−99 dBc SFDR（5 MHz，800 Ω负载）\n\n• 低功耗：10.7 mA（5 V时）\n\n• 电源电压范围：+2.7 V至±5.5 V\n\n• 通过AEC-Q100认证(AD8132W);

Low Cost, High Speed Differential Amplifier

FEATURES High speed 350 MHz, −3 dB bandwidth 1200 V/μs slew rate Resistor set gain Internal common-mode feedback Improved gain and phase balance: −68 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: −99 dBc SFDR @ 5 MHz, 800 Ω load Low power: 10.7 mA @ 5 V

Low Cost, High Speed Differential Amplifier

FEATURES High speed 350 MHz, −3 dB bandwidth 1200 V/μs slew rate Resistor set gain Internal common-mode feedback Improved gain and phase balance: −68 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: −99 dBc SFDR @ 5 MHz, 800 Ω load Low power: 10.7 mA @ 5 V

Low-Cost, High-Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

Low Cost, High Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

Low Cost, High Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

Low-Cost, High-Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

丝印代码：HMA；Low Cost, High Speed Differential Amplifier

FEATURES High speed 350 MHz, −3 dB bandwidth 1200 V/μs slew rate Resistor set gain Internal common-mode feedback Improved gain and phase balance: −68 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: −99 dBc SFDR @ 5 MHz, 800 Ω load Low power: 10.7 mA @ 5 V

丝印代码：HMA；Low Cost, High Speed Differential Amplifier

FEATURES High speed 350 MHz, −3 dB bandwidth 1200 V/μs slew rate Resistor set gain Internal common-mode feedback Improved gain and phase balance: −68 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: −99 dBc SFDR @ 5 MHz, 800 Ω load Low power: 10.7 mA @ 5 V

Low Cost, High Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

Low-Cost, High-Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

Low Cost, High Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

丝印代码：HMA；Low Cost, High Speed Differential Amplifier

FEATURES High speed 350 MHz, −3 dB bandwidth 1200 V/μs slew rate Resistor set gain Internal common-mode feedback Improved gain and phase balance: −68 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: −99 dBc SFDR @ 5 MHz, 800 Ω load Low power: 10.7 mA @ 5 V

Low-Cost, High-Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

丝印代码：HMA；Low Cost, High Speed Differential Amplifier

FEATURES High speed 350 MHz, −3 dB bandwidth 1200 V/μs slew rate Resistor set gain Internal common-mode feedback Improved gain and phase balance: −68 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: −99 dBc SFDR @ 5 MHz, 800 Ω load Low power: 10.7 mA @ 5 V

Low Cost, High Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

Low Cost, High Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

丝印代码：HMA；Low Cost, High Speed Differential Amplifier

FEATURES High speed 350 MHz, −3 dB bandwidth 1200 V/μs slew rate Resistor set gain Internal common-mode feedback Improved gain and phase balance: −68 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: −99 dBc SFDR @ 5 MHz, 800 Ω load Low power: 10.7 mA @ 5 V

丝印代码：HMA；Low Cost, High Speed Differential Amplifier

FEATURES High speed 350 MHz, −3 dB bandwidth 1200 V/μs slew rate Resistor set gain Internal common-mode feedback Improved gain and phase balance: −68 dB @ 10 MHz Separate input to set the common-mode output voltage Low distortion: −99 dBc SFDR @ 5 MHz, 800 Ω load Low power: 10.7 mA @ 5 V

Low Cost, High Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed

Low Cost, High Speed Differential Amplifier

GENERAL DESCRIPTION The AD8132 is a low cost differential or single-ended input to differential output amplifier with resistor set gain. The AD8132 is a major advancement over op amps for driving differential input ADCs or for driving signals over long lines. The AD8132 has a unique internal feed