Triple Skew-Compensating Video Delay Line with Analog and Digital Control

GENERAL DESCRIPTION The AD8120 is a triple broadband skew-compensating delay line that corrects for time mismatch between video signals incurred by transmission in unshielded twisted pairs of Category 5 and Category 6 type cables. Skew between the individual pairs exists in most types of multipai

三通道偏斜补偿视频延迟线，内置模拟和数字控制功能

AD8120是一款三通道宽带偏斜延迟补偿IC，可校正视频信号在5类或6类非屏蔽双绞线电缆中传输所导致的时间失配。大部分类型多线对UTP电缆的各线对使用不同的对绞率，以便使线对之间的串扰较小，因此各线对之间会存在偏斜。因此，一些线对比另一些线对要长；对于较长的电缆，两个线对之间的传播时间差可能会达到数十纳秒以上。\n\nAD8120内置三条延迟路径，可提供最长50 ns的宽带延迟，采用64步数字控制或模拟控制进行调整，增量为0.8 ns。AD8120所用的延迟技术可极大地降低输出噪声和失调。它具有106 MHz至152 MHz的宽带宽范围，依据延迟设置而定。这种高输出带宽能力使该器件非常适合通过 • 校正非屏蔽双绞线(UTP)电缆的延迟偏斜\n\n• 每个通道最多延迟50 ns\n\n• 高速\n带宽：200 MHz（VOUT = 1.4 V峰峰值，0 ns延迟）\n带宽：150 MHz（VOUT = 1.4 V峰峰值，50 ns延迟）\n\n• 出色的通道间匹配性能\n失调匹配：30 mV（折合到输入端）\n增益匹配：0.8%;

Triple Skew-Compensating Video Delay Line with Analog and Digital Control

GENERAL DESCRIPTION The AD8120 is a triple broadband skew-compensating delay line that corrects for time mismatch between video signals incurred by transmission in unshielded twisted pairs of Category 5 and Category 6 type cables. Skew between the individual pairs exists in most types of multipai

Triple Skew-Compensating Video Delay Line with Analog and Digital Control

GENERAL DESCRIPTION The AD8120 is a triple broadband skew-compensating delay line that corrects for time mismatch between video signals incurred by transmission in unshielded twisted pairs of Category 5 and Category 6 type cables. Skew between the individual pairs exists in most types of multipai

Triple Skew-Compensating Video Delay Line with Analog and Digital Control

GENERAL DESCRIPTION The AD8120 is a triple broadband skew-compensating delay line that corrects for time mismatch between video signals incurred by transmission in unshielded twisted pairs of Category 5 and Category 6 type cables. Skew between the individual pairs exists in most types of multipai

封装/外壳：32-VFQFN 裸露焊盘，CSP 包装：托盘 描述：IC VIDEO DELAY LINE 32LFCSP 集成电路（IC） 视频处理

封装/外壳：32-VFQFN 裸露焊盘，CSP 包装：托盘 描述：IC VIDEO DELAY LINE 32LFCSP 集成电路（IC） 视频处理

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

-15 dBm INPUT, VARIABLE GAIN AMPLIFIER SILICON MMIC FOR TRANSMITTER AGC OF DIGITAL CELLULAR TELEPHONE

DESCRIPTION The µPC8130TA and µPC8131TA are silicon monolithic integrated circuits designed as variable gain amplifier. Due to 800 MHz to 1.5 GHz operation, these ICs are suitable for RF transmitter AGC stage of digital cellular telephone. These ICs are lower distortion than conventional µPC8119T

VARIABLE GAIN AMPLIFIER SILICON MMIC FOR TRANSMITTER AGC OF DIGITAL CELLULAR TELEPHONE

DESCRIPTION The µPC8119T and µPC8120T are silicon monolithic integrated circuits designed as variable gain amplifier. Due to 100 MHz to 1.9 GHz operation, these ICs are suitable for RF transmitter AGC stage of digital cellular telephone. Two types of gain control let users choose in accordance wi