Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

低功耗、高速轨到轨输入/输出运算放大器

AD8030是一款双核、轨到轨输入和输出的高速放大器，每放大器的静态电流仅为1.3 mA。虽然功耗很低，但该放大器却能提供出色的性能，小信号带宽为125 MHz，压摆率为60 V/µs。采用ADI公司的XFCB工艺使该器件实现了高速、高性能和低功耗特性。\n\n 这款放大器采用单电源供电，具有轨到轨输入和输出，电源电压范围为2.7V至12V。输入电压范围可以超过各供电轨200 mV而不会反相。输出动态范围可以扩展至各供电轨40 mV以内。\n\n AD8030以极低的功耗提供出色的信号质量。在G = +1时，无杂散动态范围(SFDR)为-72dBc (1MHz)，0.1&# • 低功耗\n- 每放大器电源电流1.3 mA\n\n• 高速\n- -3 dB带宽：125MHz (G=+1)\n- 压摆率：60V/µs\n- 0.1%建立时间：80ns\n\n• 宽电源电压范围：2.7 V至12 V\n\n• 失调电压：6 mV（最大值）\n\n• 低输入偏置电流：+0.7 µA至\n-1.5µA - SOIC-8、SO723-8\n\n• 小型封装\n\n• 轨到轨输入和输出\n无反相，输入可高于供电轨200 mV;

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

文件：670.88 Kbytes Page：25 Pages

2 X 2 RF捷变收发器,与AD9361为同颗物料

AD80305/AD9361是一款面向3G和4G基站应用的高性能、高集成度的射频(RF)Agile Transceiver™捷变收发器。该器件的可编程性和宽带能力使其成为多种收发器应用的理想选择。该器件集RF前端与灵活的混合信号基带部分为一体，集成频率合成器，为处理器提供可配置数字接口，从而简化设计导入。AD9361接收器LO工作频率范围为70 MHz至6.0 GHz，发射器LO工作频率范围为47 MHz至6.0 GHz，涵盖大部分特许执照和免执照频段，支持的通道带宽范围为200 kHz以下至56 MHz。\r\n两个独立的直接变频接收器拥有首屈一指的噪声系数和线性度。每个接收(RX)子系统都 集成12位DAC和ADC的RF 2 × 2收发器\nTX频段：47 MHz至6.0 GHz\nRX频段：70 MHz至6.0 GHz\n支持TDD和FDD操作\n可调谐通道带宽：双通道接收器：6路差分或12路单端输入\n出色的接收器灵敏度，噪声系数为2 dB (800 MHz LO)\nRX增益控制实时监控和控制信号用于手动增益\n独立的自动增益控制\n\n双发射器：4路差分输出\n高线性度宽带发射器TX EVM：≤−40 dB\nTX噪声：≤−157 dBm/Hz本底噪声\nTX监控器：动态范围≥66 dB，精度=1 dB\n\n集成式小数N分频频率合成器\n2.4 Hz最大本振(LO)步长;

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

GENERAL DESCRIPTION The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high speed amplifiers with a quiescent current of only 1.3 mA per amplifier. Despite their low power consumption, the amplifiers provide excellent performance with 125 MHz small signal band

Low Power, High Speed Rail-to-Rail Input/Output Amplifier

文件：670.88 Kbytes Page：25 Pages

包装：盒 描述：BOARD EVAL FOR AD8030AR 开发板，套件，编程器 评估板 - 运算放大器

包装：散装 描述：BOARD EVAL FOR AD8030ARJ 开发板，套件，编程器 评估板 - 运算放大器

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

6-Pin DIP Optoisolators Darlington Ouput(No Base Connection)

The MOC8030 and MOC8050 devices consist of gallium arsenide infrared emitting diodes optically coupled to monolithic silicon photodarlington detectors. The chip to Pin 6 base connection has been eliminated to improve output performance in high noise environments. They are best suited for use in a