5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

5 V、轨到轨、高输出电流、xDSL线路驱动器放大器

AD8018是一款双通道、高速、低成本放大器，能够驱动在供电轨0.5 V范围内的低失真信号。它主要用于单电源xDSL系统，在这种系统中，低失真和低成本均至关重要，并且必须利用最低的电源电压在线路上获得较大的动态范围。每个放大器驱动最小350 mA的输出电流，同时100 kHz时无杂散动态范围(SFDR)仍保持为-95 dBc，这对于任何xDSL CPE（用户端设备）应用而言都是极为出色的性能。AD8018提供灵活的待机和关断模式。借助双位控制（以DGND为基准的阈值为1.5 V），可以进入完全待机（输出低阻抗）和关断（输出高阻抗）模式。\n\n AD8018采用ADI公司的高速XFC • 适用于USB、PCMCIA或基于PCI的用户端设备(CPE)的xDSL线路驱动器放大器\n\n• 轨到轨输出电压、高输出电流驱动\n\n• 输出电流：400 mA（至10 Ω 差分负载中，8 V峰峰值）\n\n• 低单音失真\n-86dBc（最差谐波，6 V峰峰值至10 Ω差分负载中，100kHz）\n\n• 低噪声\n电压噪声密度：4.5 nV/ √Hz (100kHz)\n\n• 带外SFDR：-82dBc(144kHz至\n500kHz，RLOAD= 12.5 Ω，PLINE= 13dBm) \n\n• 低功耗工作\n电源电压范围：3.3 V至8 V \n双逻辑位控制可实现待机和关断;

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

PRODUCT DESCRIPTION The AD8018 is intended for use in single-supply (5 V) xDSL modems where high-output current and low distortion are essential to achieve maximum reach. The dual high-speed amplifiers are capable of driving low distortion signals to within 0.5 V of the power supply rail. F

5 V, Rail-to-Rail, High-Output Current, xDSL Line Drive Amplifier

文件：340.64 Kbytes Page：19 Pages

功能：线路驱动器，xDSL 包装：散装 描述：BOARD EVAL FOR AD8018 开发板，套件，编程器 评估和演示板及套件

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：管件 描述：IC DRIVER 2/0 8SOIC 集成电路（IC） 驱动器，接收器，收发器

1.8-volt 2-channel step-up, step-down, or inverting DC-DC converter control IC

■ Overview The AN8018SA is a two-channel PWM DC-DC converter control IC that features low-voltage operation. This IC can obtain the step-up, step-down and inverting voltages with a small number of external components. The minimum operating voltage is as low as 1.8 V so that it can operate with

1.8-volt 2-channel step-up, step-down, or inverting DC-DC converter control IC

■ Overview The AN8018SA is a two-channel PWM DC-DC converter control IC that features low-voltage operation. This IC can obtain the step-up, step-down and inverting voltages with a small number of external components. The minimum operating voltage is as low as 1.8 V so that it can operate with

UHF Lineat Amplifier

400 mW, 18.5 dB 40–1000 MHz LINEAR AMPLIFIERS Designed for linear amplifier applications in 50 ohm systems requiring wide bandwidth, low noise, and low distortion. Internal DC blocking on RF ports reduces external component count and related circuit area. This hybrid utilizes push–pull circui