Dual 350 MHz Low Power Amplifier

PRODUCT DESCRIPTION The AD8012 is a dual, low power, current feedback amplifier capable of providing 350 MHz bandwidth while using only 1.7 mA per amplifier. It is intended for use in high frequency, wide dynamic range systems where low distortion and high speed are essential and low power is cri

Dual 350 MHz Low Power Amplifier

文件：261.64 Kbytes Page：16 Pages

Dual 350 MHz Low Power Amplifier

PRODUCT DESCRIPTION The AD8012 is a dual, low power, current feedback amplifier capable of providing 350 MHz bandwidth while using only 1.7 mA per amplifier. It is intended for use in high frequency, wide dynamic range systems where low distortion and high speed are essential and low power is cri

Dual 350 MHz Low Power Amplifier

FEATURES Low Power 1.7 mA/Amplifier Supply Current Fully Specified for
5 V and +5 V Supplies High Output Current, 125 mA High Speed 350 MHz, –3 dB Bandwidth (G = +1) 150 MHz, –3 dB Bandwidth (G = +2) 2,250 V/s Slew Rate 20 ns Settling Time to 0.1% Low Distortion –72 dBc Worst Harm

Dual 350 MHz Low Power Amplifier

文件：261.64 Kbytes Page：16 Pages

T1/CEPT Extended Temperature Range SMD Dual Line Interface Module

Units matched to leading transceiver ICs. Meet requirements for T1, E1, CEPT and PRI ISDN over extended temperature range –40 to +85˚C.

RovNav 5 LBL Transceiver

Description RovNav 5 is a highly configurable, tri-band acoustic transceiver designed to support a family of remote transducers operating in the LF, MF and EHF frequency bands. Key Features • MF, EHF and LF frequencies supported in one bottle • Auto-sensing of Remote Transducers. Tra

Bus Bar Wire, #14 Sol TC

Product Description Bus Bar Wire, 14AWG (Solid) Tinned Copper, QQ-W-343G

Flowmeter with paddle wheel for continuous flow measure-ment

The paddle wheel flow meter is available in magnetic or optical variant. The magnetic variant of the measuring instrument is especially designed for use with neutral, slightly aggressive, solid free liquids. The optical variant is exclusively intended for use with infrared transparent liquids.

I/O modules IP65/ IP67/ IP69k

Bürkert I/O modules (In/Out) Type ME64 for extending the Industrial Ethernet gateway Type ME63 are designed to capture the switching signals of various sensors. The further processing of these input signals, e.g. by Ethernet protocol to a higher field level, is configured via the gateway. The 1