1.5 GHz Ultrahigh Speed Op Amp

GENERAL DESCRIPTION The AD8000 is an ultrahigh speed, high performance, current feedback amplifier. Using ADI’s proprietary eXtra Fast Complementary Bipolar (XFCB) process, the amplifier can achieve a small signal bandwidth of 1.5 GHz and a slew rate of 4100 V/µs. The AD8000 has low spurious-fre

1.5 GHz, Ultrahigh Speed Op Amp

FEATURES High speed 1.5 GHz, −3 dB bandwidth (G = +1) 650 MHz, full power bandwidth (G = +2, VO = 2 V p-p) Slew rate: 4100 V/μs 0.1% settling time: 12 ns Excellent video specifications 0.1 dB flatness: 170 MHz Differential gain: 0.02% Differential phase: 0.01° Output overdrive recovery: 2

1.5 GHz、超高速运算放大器

AD8000是一款超高速、高性能、电流反馈型放大器。该放大器采用ADI公司专有超快速互补双极性(XFCB)工艺制造，可实现1.5 GHz的小信号带宽和4100 V/µs的压摆率。\n\n 20 MHz时的无杂散动态范围(SFDR)低至75 dBc，输入电压噪声为1.6 nV/√Hz。AD8000可以驱动100 mA以上的负载电流，失真极低。该放大器可以采用+5 V至±6 V电源供电。这些特性使它非常适合包括高速仪器仪表在内的各种应用。\n\n AD8000的差分增益为0.02%，差分相位为0.01°，且0.1 dB平坦度为170 MHz。它具有出色的视频规格特性，确 • 高速\n• -3 dB带宽：1500 MHz (G=+1)\n\n• 全功率带宽：650 MHz（G=+2， VO=2 V峰峰值）\n\n• 压摆率：4100 V/µs\n\n• 0.1%建立时间：12 ns\n\n\n\n\n• 出色的视频特性\n• 0.1 dB平坦度：170 MHz\n\n• 差分增益：0.02%\n\n• 差分相位：0.01°\n\n\n\n\n• 输出过驱恢复：22 ns\n\n• 低噪声：1.6 nV/√Hz输入电压噪声\n\n• 宽带宽范围内低失真\n• SFDR：75 dBc (20 MHz)\n\n• SFDR：62 dBc (50 MHz;

1.5 GHz, Ultrahigh Speed Op Amp

FEATURES High speed 1.5 GHz, −3 dB bandwidth (G = +1) 650 MHz, full power bandwidth (G = +2, VO = 2 V p-p) Slew rate: 4100 V/μs 0.1% settling time: 12 ns Excellent video specifications 0.1 dB flatness: 170 MHz Differential gain: 0.02% Differential phase: 0.01° Output overdrive recovery: 2

1.5 GHz Ultrahigh Speed Op Amp

GENERAL DESCRIPTION The AD8000 is an ultrahigh speed, high performance, current feedback amplifier. Using ADI’s proprietary eXtra Fast Complementary Bipolar (XFCB) process, the amplifier can achieve a small signal bandwidth of 1.5 GHz and a slew rate of 4100 V/µs. The AD8000 has low spurious-fre

丝印代码：HNB；1.5 GHz, Ultrahigh Speed Op Amp

FEATURES High speed 1.5 GHz, −3 dB bandwidth (G = +1) 650 MHz, full power bandwidth (G = +2, VO = 2 V p-p) Slew rate: 4100 V/μs 0.1% settling time: 12 ns Excellent video specifications 0.1 dB flatness: 170 MHz Differential gain: 0.02% Differential phase: 0.01° Output overdrive recovery: 2

1.5 GHz Ultrahigh Speed Op Amp

GENERAL DESCRIPTION The AD8000 is an ultrahigh speed, high performance, current feedback amplifier. Using ADI’s proprietary eXtra Fast Complementary Bipolar (XFCB) process, the amplifier can achieve a small signal bandwidth of 1.5 GHz and a slew rate of 4100 V/µs. The AD8000 has low spurious-fre

丝印代码：HNB；1.5 GHz, Ultrahigh Speed Op Amp

FEATURES High speed 1.5 GHz, −3 dB bandwidth (G = +1) 650 MHz, full power bandwidth (G = +2, VO = 2 V p-p) Slew rate: 4100 V/μs 0.1% settling time: 12 ns Excellent video specifications 0.1 dB flatness: 170 MHz Differential gain: 0.02% Differential phase: 0.01° Output overdrive recovery: 2

丝印代码：HNB；1.5 GHz, Ultrahigh Speed Op Amp

FEATURES High speed 1.5 GHz, −3 dB bandwidth (G = +1) 650 MHz, full power bandwidth (G = +2, VO = 2 V p-p) Slew rate: 4100 V/μs 0.1% settling time: 12 ns Excellent video specifications 0.1 dB flatness: 170 MHz Differential gain: 0.02% Differential phase: 0.01° Output overdrive recovery: 2

1.5 GHz Ultrahigh Speed Op Amp

GENERAL DESCRIPTION The AD8000 is an ultrahigh speed, high performance, current feedback amplifier. Using ADI’s proprietary eXtra Fast Complementary Bipolar (XFCB) process, the amplifier can achieve a small signal bandwidth of 1.5 GHz and a slew rate of 4100 V/µs. The AD8000 has low spurious-fre

1.5 GHz Ultrahigh Speed Op Amp

GENERAL DESCRIPTION The AD8000 is an ultrahigh speed, high performance, current feedback amplifier. Using ADI’s proprietary eXtra Fast Complementary Bipolar (XFCB) process, the amplifier can achieve a small signal bandwidth of 1.5 GHz and a slew rate of 4100 V/µs. The AD8000 has low spurious-fre

1.5 GHz, Ultrahigh Speed Op Amp

FEATURES High speed 1.5 GHz, −3 dB bandwidth (G = +1) 650 MHz, full power bandwidth (G = +2, VO = 2 V p-p) Slew rate: 4100 V/μs 0.1% settling time: 12 ns Excellent video specifications 0.1 dB flatness: 170 MHz Differential gain: 0.02% Differential phase: 0.01° Output overdrive recovery: 2

1.5 GHz Ultrahigh Speed Op Amp

GENERAL DESCRIPTION The AD8000 is an ultrahigh speed, high performance, current feedback amplifier. Using ADI’s proprietary eXtra Fast Complementary Bipolar (XFCB) process, the amplifier can achieve a small signal bandwidth of 1.5 GHz and a slew rate of 4100 V/µs. The AD8000 has low spurious-fre

1.5 GHz Ultrahigh Speed Op Amp

GENERAL DESCRIPTION The AD8000 is an ultrahigh speed, high performance, current feedback amplifier. Using ADI’s proprietary eXtra Fast Complementary Bipolar (XFCB) process, the amplifier can achieve a small signal bandwidth of 1.5 GHz and a slew rate of 4100 V/µs. The AD8000 has low spurious-fre

1.5 GHz, Ultrahigh Speed Op Amp

FEATURES High speed 1.5 GHz, −3 dB bandwidth (G = +1) 650 MHz, full power bandwidth (G = +2, VO = 2 V p-p) Slew rate: 4100 V/μs 0.1% settling time: 12 ns Excellent video specifications 0.1 dB flatness: 170 MHz Differential gain: 0.02% Differential phase: 0.01° Output overdrive recovery: 2

1.5 GHz Ultrahigh Speed Op Amp

文件：611.46 Kbytes Page：21 Pages

包装：盒 描述：BOARD EVAL FOR AD8000YCP 开发板，套件，编程器 评估板 - 运算放大器

包装：盒 描述：BOARD EVAL FOR AD8000YRD 开发板，套件，编程器 评估板 - 运算放大器

3-pin Positive Output Low Dropout Voltage Regulator 50mA Type

Overview The AN8000 series is 3-pin low-dropout fixed positive output monolithic voltage regulators. Since thier power consumption can be minimized, they are suitable for battery stabilizing power supply and reference voltage. Thirteen types of output voltage are available ; 2V, 2.5V, 3V, 3.5V (T

Silicon planar type

Silicon planar type For stabilization of power supply ■Features •Extremely low noise voltage caused from the diode (2.4V to 39V, 1/3 to 1/10 of our conventional MAZ3000 series) •Extremely good rising performance (in the low-current range) •Easy-to-select the optimum diode because

5V VOLTAGE REGULATOR WITH WATCHDOG TIMER

5V VOLTAGE REGULATOR WITH WATCHDOG TIMER The TA8000S TA8000F is an IC specially designed for automotive microcomputer systems. It produce an output voltage of 5 ± 0.25V without need for adjustment from its accurate reference voltage and amplifier circuit.

Smart card interface

文件：218.03 Kbytes Page：24 Pages

Smart card interface

文件：218.03 Kbytes Page：24 Pages