8-Bit 20 MSPS, 60 mW Sampling A/D Converter

PRODUCT DESCRIPTION The AD775 is a CMOS, low power, 8-bit, 20 MSPS sampling analog-to-digital converter (ADC). The AD775 features a built-in sampling function and on-chip reference bias resistors to provide a complete 8-bit ADC solution. The AD775 utilizes a pipelined/ping pong two-step flash arc

8位、20 MSPS、60 mW采样ADC

AD775是一款CMOS、低功耗、8位、20 MSPS采样模数转换器（ADC），内置采样功能和片内基准电压偏置电阻，可提供完整8位ADC解决方案。它采用流水线式或乒乓两步式Flash架构，可提供最高35 MHz的采样速率，同时保持极低的功耗（60 mW）。\n\n该器件融合了出色的微分非线性（DNL）、高采样速率、低差分增益与相位误差、极低功耗以及+5 V单电源工作等特性，非常适合各种视频与图像采集应用，包括便携式设备应用。AD775的参考电阻串可采用多种配置方式进行连接，以处理不同的输入范围。与传统的Flash型转换器相比，低输入电容（典型值为11 pF）提供易于驱动的输入负载。\n\nAD • CMOS、8 位、20 MSPS采样模数转换器\n\n• 低功耗：60 mW\n\n• +5 V单电源工作\n\n• 微分非线性：0.3 LSB\n\n• 差分增益：1%\n\n\n\n• 差分相位：0.5度\n\n• 三态输出\n\n• 片内基准电压偏置电阻\n\n• 可调基准电压输入\n\n• 视频工业标准引脚排列\n\n• 小型封装：\n-24引脚300 Mil表面贴装SOIC；\n- 24引脚400 Mil塑料DIP;

Product-to-Frequency Converter

GENERAL DESCRIPTION The AD7750 is a Product-to-Frequency Converter (PFC) that can be configured for power measurement or voltage-to-frequency conversion. The part contains the equivalent of two channels of A/D conversion, a multiplier, a digital-to-frequency converter, a reference and other con

Product-to-Frequency Converter

GENERAL DESCRIPTION The AD7750 is a Product-to-Frequency Converter (PFC) that can be configured for power measurement or voltage-to-frequency conversion. The part contains the equivalent of two channels of A/D conversion, a multiplier, a digital-to-frequency converter, a reference and other con

Product-to-Frequency Converter

GENERAL DESCRIPTION\nThe AD7750 is a Product-to-Frequency Converter (PFC) that can be configured for power measurement or voltage-to-frequency conversion. The part contains the equivalent of two channels of A/D conversion, a multiplier, a digital-to-frequency converter, a reference and other conditi Two Differential Analog Input Channels\nProduct of Two Channels\nVoltage-to-Frequency Conversion on a Single Channel\nReal Power Measurement Capability\n< 0.2% Error Over the Range 400% Ibasic to 2% Ibasic\nTwo or Four Quadrant Operation (Positive and Negative Power)\nGain Select of 1 or;

Product-to-Frequency Converter

GENERAL DESCRIPTION The AD7750 is a Product-to-Frequency Converter (PFC) that can be configured for power measurement or voltage-to-frequency conversion. The part contains the equivalent of two channels of A/D conversion, a multiplier, a digital-to-frequency converter, a reference and other con

Energy Metering IC With On-Chip Fault Detection

GENERAL DESCRIPTION The AD7751 is a high-accuracy fault-tolerant electrical energy measurement IC that is intended for use with 2-wire distribution systems. The part specifications surpass the accuracy require ments as quoted in the IEC1036 standard. FEATURES High Accuracy, Supports 50

Energy Metering IC With On-Chip Fault Detection

This product is obsolete. High Accuracy, Supports 50 Hz/60 Hz IEC 687/1036\nLess than 0.1% Error Over a Dynamic Range of 500 to 1\nSuppliesAverage Real Poweron the Frequency Outputs F1 and F2\nHigh-Frequency Output CF Is Intended for Calibration and SuppliesInstantaneous Real Power\nContinuous Monitoring of the Phase and;

Energy Metering IC With On-Chip Fault Detection

GENERAL DESCRIPTION The AD7751 is a high-accuracy fault-tolerant electrical energy measurement IC that is intended for use with 2-wire distribution systems. The part specifications surpass the accuracy require ments as quoted in the IEC1036 standard. FEATURES High Accuracy, Supports 50

Energy Metering IC With On-Chip Fault Detection

GENERAL DESCRIPTION The AD7751 is a high-accuracy fault-tolerant electrical energy measurement IC that is intended for use with 2-wire distribution systems. The part specifications surpass the accuracy require ments as quoted in the IEC1036 standard. FEATURES High Accuracy, Supports 50

Energy Metering IC With On-Chip Fault Detection

GENERAL DESCRIPTION The AD7751 is a high-accuracy fault-tolerant electrical energy measurement IC that is intended for use with 2-wire distribution systems. The part specifications surpass the accuracy require ments as quoted in the IEC1036 standard. FEATURES High Accuracy, Supports 50

Energy Metering IC With On-Chip Fault Detection

GENERAL DESCRIPTION The AD7751 is a high-accuracy fault-tolerant electrical energy measurement IC that is intended for use with 2-wire distribution systems. The part specifications surpass the accuracy require ments as quoted in the IEC1036 standard. FEATURES High Accuracy, Supports 50

Energy Metering IC with Pulse Output

GENERAL DESCRIPTION The AD7755 is a high accuracy electrical energy measurement IC. The part specifications surpass the accuracy requirements as quoted in the IEC1036 standard. See Analog Devices’ Application Note AN-559 for a description of an IEC1036 watt-hour meter reference design. The o

Energy Metering IC with Pulse Output

GENERAL DESCRIPTION The AD7755 is a high accuracy electrical energy measurement IC. The part specifications surpass the accuracy requirements as quoted in the IEC1036 standard. See Analog Devices’ Application Note AN-559 for a description of an IEC1036 watt-hour meter reference design. The o

Energy Metering IC with Pulse Output

GENERAL DESCRIPTION The AD7755 is a high accuracy electrical energy measurement IC. The part specifications surpass the accuracy requirements as quoted in the IEC1036 standard. See Analog Devices’ Application Note AN-559 for a description of an IEC1036 watt-hour meter reference design. The o

Energy Metering IC with Pulse Output

GENERAL DESCRIPTION The AD7755 is a high accuracy electrical energy measurement IC. The part specifications surpass the accuracy requirements as quoted in the IEC1036 standard. See Analog Devices’ Application Note AN-559 for a description of an IEC1036 watt-hour meter reference design. The o

Energy Metering IC with Pulse Output

GENERAL DESCRIPTION The AD7755 is a high accuracy electrical energy measurement IC. The part specifications surpass the accuracy requirements as quoted in the IEC1036 standard. See Analog Devices’ Application Note AN-559 for a description of an IEC1036 watt-hour meter reference design. The o

8-Bit 20 MSPS, 60 mW Sampling A/D Converter

PRODUCT DESCRIPTION The AD775 is a CMOS, low power, 8-bit, 20 MSPS sampling analog-to-digital converter (ADC). The AD775 features a built-in sampling function and on-chip reference bias resistors to provide a complete 8-bit ADC solution. The AD775 utilizes a pipelined/ping pong two-step flash arc

8-Bit 20 MSPS, 60 mW Sampling A/D Converter

PRODUCT DESCRIPTION The AD775 is a CMOS, low power, 8-bit, 20 MSPS sampling analog-to-digital converter (ADC). The AD775 features a built-in sampling function and on-chip reference bias resistors to provide a complete 8-bit ADC solution. The AD775 utilizes a pipelined/ping pong two-step flash arc

8-Bit 20 MSPS, 60 mW Sampling A/D Converter

文件：336.05 Kbytes Page：12 Pages

Energy Metering IC with On-Chip Fault Detection

文件：187.6 Kbytes Page：14 Pages

Energy Metering IC with Pulse Output

文件：275.96 Kbytes Page：16 Pages

NPN Silicon RF Transistor (Especially suitable for TV-sat and UHF tuners)

NPN Silicon RF Transistor • Especially suitable for TV-sat and UHF tuners

NPN Silicon RF Transistor (Especially suitable for amplifiers and TV-sat tuners)

NPN Silicon RF Transistor • Especially suitable for amplifiers and TV-sat tuners

NPN Silicon RF Transistor (Especially suitable for TV-sat and UHF tuners)

NPN Silicon RF Transistor • Especially suitable for TV-sat and UHF tuners