16-Bit, /-0.65 LSB INL, 500 kSPS PulSAR Differential ADC in MSOP/QFN

GENERAL DESCRIPTION The AD7693 is a 16-bit, successive approximation, analog-to digital converter (ADC) that operates from a single power supply, VDD. It contains a low power, high speed, 16-bit sampling ADC with no missing codes, an internal conversion clock, and a versatile serial interface p

16-Bit Lower Power

GENERAL DESCRIPTION The AD7988-1/AD7988-5 are 16-bit, successive approximation, analog-to-digital converters (ADC) that operate from a single power supply, VDD. The AD7988-1 offers a 100 kSPS throughput, and the AD7988-5 offers a 500 kSPS throughput. They are low power, 16-bit sampling ADCs wit

16-Bit, 100 kSPS PulSAR, Differential ADC in MSOP

GENERAL DESCRIPTION The AD7684 is a 16-bit, charge redistribution, successive approximation, PulSAR® analog-to-digital converter (ADC) that operates from a single power supply, VDD, between 2.7 V to 5.5 V. It contains a low power, high speed, 16-bit sampling ADC with no missing codes, an internal

Dual Differential 16-Bit, 1 MSPS PulSAR ADC 12.0 mW in QSOP

GENERAL DESCRIPTION The AD7903 is a dual 16-bit, successive approximation, analog to-digital converter (ADC) that operates from a single power supply, VDDx, per ADC. It contains two low power, high speed, 16-bit sampling ADCs and a versatile serial port interface (SPI). On the CNVx rising edge, t

16-Bit, 500 kSPS PulSAR ADC in MSOP/QFN

GENERAL DESCRIPTION The AD7686 is a 16-bit, charge redistribution, successive approximation, analog-to-digital converter (ADC) that operates from a single 5 V power supply, VDD. It contains a low power, high speed, 16-bit sampling ADC with no missing codes, an internal conversion clock, and a ver

16位、±0.5 LSB、500 kSPS PulSAR®差分ADC，采用MSOP/QFN封装

AD7693是一款16位、逐次逼近型模数转换器(ADC)，采用单电源(VDD)供电。它内置一个低功耗、高速、16位无失码的采样ADC、一个内部转换时钟和一个多功能串行接口端口。基准电压（VREF）由外部提供，最高可以设置为电源电压VDD。在CNV上升沿，该器件对IN+与IN-引脚之间的电压差进行采样。这两个引脚上的电压摆幅在0 V 到 VREF之间，大约为VREF/2，相位相反。 功耗和吞吐速率呈线性变化关系。 \n\n SPI兼容串行接口还能够利用SDI输入将几个ADC以菊花链形式连结到单三线式总线上，并提供一个可选的忙闲指示。采用独立的VIO电源时，该器件与1.8V、2 • 16位分辨率、无失码\n\n• 吞吐速率：500 kSPS\n\n• INL/DNL：典型值±0.25 LSB，最\n大值±0.5 LSB（FSR的±8 ppm）\n\n• 动态范围：96.5 dB\n\n• 信纳比(SINAD)：96 dB(1\nkHz)\n\n• 总谐波失真(THD)：-120 dB(1 kHz)\n\n• 真差分模拟输入范围：±VREF 0 V\n至 VREF（两个输入上的VREF均可\n高达VDD）;

16-Bit, 1 MSPS PulSAR ADC in MSOP QFN

文件：292.81 Kbytes Page：12 Pages

500 kSPS PulSAR Differential ADC in MSOP/LFCSP

文件：739.14 Kbytes Page：25 Pages

18-Bit, 2 MSPS PulSAR 15 mW ADC in LFCSP (QFN)

GENERAL DESCRIPTION The AD7986 is an 18-bit, 2 MSPS successive approximation, analog-to-digital converter (ADC). It contains a low power, high speed, 18-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and a versatile serial interfac

14-Bit, 500 kSPS PulSAR ADC in MSOP

GENERAL DESCRIPTION The AD7946 is a 14-bit, charge redistribution, successive approximation, analog-to-digital converter (ADC) that operates from a single 5 V power supply, VDD. It contains a low power, high speed, 14-bit sampling ADC with no missing codes, an internal conversion clock, and a v

Differential ADC in MSOP/LFCSP

文件：665.8 Kbytes Page：24 Pages

500 kSPS PulSAR Differential ADC in MSOP/LFCSP

文件：739.14 Kbytes Page：25 Pages

500 kSPS PulSAR Differential ADC in MSOP/LFCSP

文件：739.14 Kbytes Page：25 Pages

封装/外壳：10-VFDFN 裸露焊盘，CSP 包装：卷带（TR） 描述：IC ADC 16BIT SAR 10LFCSP 集成电路（IC） 模数转换器（ADC）

封装/外壳：10-VFDFN 裸露焊盘，CSP 包装：卷带（TR） 描述：IC ADC 16BIT SAR 10LFCSP 集成电路（IC） 模数转换器（ADC）

500 kSPS PulSAR Differential ADC in MSOP/LFCSP

文件：739.14 Kbytes Page：25 Pages

500 kSPS PulSAR Differential ADC in MSOP/LFCSP

文件：739.14 Kbytes Page：25 Pages

16-Bit, 짹0.5 LSB, 500 kSPS PulSAR짰 Differential ADC in MSOP/QFN

文件：624.78 Kbytes Page：24 Pages

500 kSPS PulSAR Differential ADC in MSOP/LFCSP

文件：739.14 Kbytes Page：25 Pages

PC SCREW TERMINALS

文件：545.88 Kbytes Page：1 Pages

500 kSPS PulSAR Differential ADC in MSOP/LFCSP

文件：739.14 Kbytes Page：25 Pages