16-Bit, 750 kSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7612 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only seria

16-Bit, 250 kSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7610 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only seria

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7952 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial

18-Bit, 2.5 LSB INL, 800 kSPS SAR ADC

GENERAL DESCRIPTION The AD7665 is a 16-bit, 570 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. It contains a high speed 16-bit sampling ADC, a resistor input scaler that allows various input ranges, an internal conversion clock, error

16-Bit 1 MSPS SAR Unipolar ADC with Ref

GENERAL DESCRIPTION The AD7667is a 16-bit, 1 MSPS, charge redistribution SAR analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both serial

Low Cost, 4-Channel, 16-Bit 1 MSPS PulSAR짰 ADC

GENERAL DESCRIPTION The AD7655 is a low cost, simultaneous sampling, dual channel, 16-bit, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. It contains two low noise, wide bandwidth, track-and-hold amplifiers that allow simultaneous sampling,

16-Bit, 570 kSPS CMOS ADC

GENERAL DESCRIPTION The AD7665 is a 16-bit, 570 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. It contains a high speed 16-bit sampling ADC, a resistor input scaler that allows various input ranges, an internal conversion clock, error co

16-Bit, 1.5 LSB INL, 2 MSPS PulSAR ADC

GENERAL DESCRIPTION The AD7622 is a 16-bit, 2 MSPS, charge redistribution SAR, fully differential, analog-to-digital converter (ADC) that operates from a single 2.5 V power supply. The part contains a high speed, 16-bit sampling ADC, an internal conversion clock, an internal reference (and buffer

16-Bit, 570 kSPS PulSAR Unipolar CMOS ADC

GENERAL DESCRIPTION The AD7664 is a 16-bit, 570 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, error correction circuits, and both serial and parallel syst

16-Bit, 100 kSPS CMOS ADC

GENERAL DESCRIPTION The AD7660 is a 16-bit, 100 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. The part contains an internal conversion clock, error correction circuits, and both serial and parallel system interface ports. The AD7660 is

16-Bit, 250 kSPS CMOS ADC

GENERAL DESCRIPTION The AD7663 is a 16-bit, 250 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. It contains a high speed 16-bit sampling ADC, a resistor input scaler that allows various input ranges, an internal conversion clock, error co

16-Bit,
1,-1 LSB INL,500 kSPS, Differential ADC

GENERAL DESCRIPTION The AD7676 is a 16-bit, 500 kSPS, charge redistribution SAR, fully differential analog-to-digital converter (ADC) that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, error correction circuits, and both

16位无失码、100 kSPS、CMOS逐次逼近型 PulSAR® ADC

AD7660是一款16位、100 kSPS、电荷再分配SAR模数转换器(ADC)，采用5 V单电源供电。 该器件内置一个内部转换时钟、纠错电路以及串行和并行系统接口端口。 \n\n AD7660经过出厂硬件校准和全面测试，可确保除一般直流参数（增益、偏置和线性度）之外，诸如信噪比(SNR)和总谐波失真(THD)等交流参数也合乎要求。 \n\n 该器件使用ADI公司的0.6微米高性能CMOS工艺制造，成本很低；可提供48引脚LQFP和48引脚小型LFCSP两种封装；工作温度范围为−40℃至+85℃。 \n\n 产品聚焦 \n\n 高吞吐速率 • 吞吐速率： 100 kSPS \n\n• 积分非线性(INL)： 最大值：_3 LSB（_0.0046%满量程） \n\n• 16位分辨率、无失码 \n\n• S/(N+D)： 最小值87 dB（10 kHz时），典型值90 dB（45 kHz时） \n\n• 总谐波失真(THD)： 最大值–96 dB（10 kHz时） \n\n• 模拟输入电压范围： 0 V至2.5 V \n\n• 具有交流和直流两种规格\n\n• 无流水线延迟;

16-Bit, 500 kSPS PulSAR Dual, 2-Channel, Simultaneous Sampling ADC

文件：548.57 Kbytes Page：28 Pages

18-Bit, 2.5 LSB INL, 800 kSPS SAR ADC

文件：983.09 Kbytes Page：28 Pages

16-Bit, 1 MSPS CMOS ADC

文件：675.27 Kbytes Page：24 Pages

18-Bit, 2.5 LSB INL, 800 kSPS SAR ADC

文件：983.09 Kbytes Page：28 Pages

16-Bit 500 kSPS PulSARTM Unipolar ADC with Reference

文件：804.26 Kbytes Page：28 Pages

16-Bit, 100 kSPS PulSAR Unipolar CMOS ADC

文件：488.51 Kbytes Page：21 Pages

16-Bit, 500 kSPS PulSAR짰 Dual, 2-Channel, Simultaneous Sampling ADC

文件：548.57 Kbytes Page：28 Pages

16-Bit, 100 kSPS CMOS ADC

GENERAL DESCRIPTION The AD7660 is a 16-bit, 100 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. The part contains an internal conversion clock, error correction circuits, and both serial and parallel system interface ports. The AD7660 is

16-Bit, 100 kSPS CMOS ADC

GENERAL DESCRIPTION The AD7660 is a 16-bit, 100 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. The part contains an internal conversion clock, error correction circuits, and both serial and parallel system interface ports. The AD7660 is

16-Bit, 100 kSPS PulSAR

文件：340.78 Kbytes Page：20 Pages

16-Bit, 100 kSPS PulSAR Unipolar CMOS ADC

文件：488.51 Kbytes Page：21 Pages

封装/外壳：48-LQFP 包装：管件 描述：IC ADC 16BIT SAR 48LQFP 集成电路（IC） 模数转换器（ADC）

封装/外壳：48-LQFP 包装：卷带（TR） 描述：IC ADC 16BIT SAR 48LQFP 集成电路（IC） 模数转换器（ADC）

InGaAsP STRAINED DC-PBH LASER DIODE MODULE 1 625 nm TELEMETRY APPLICATION

DESCRIPTION The NX7660JC is a 1 625 nm newly developed Strained Multiple Quantum Well (St-MQW) structure laser diode DIP module with single mode fiber and internal thermoelectric cooler. It is designed for light sources of telemetry equipment. FEATURES • Output power Pf = 5 mW MIN. @ IF = 65 mA

1 510 nm OPTICAL FIBER COMMUNICATIONS InGaAsP STRAINED MQW DC-PBH LASER DIODE MODULE

DESCRIPTION The NX8501 Series is a 1 510 nm phase-shifted DFB (Distributed Feed-Back) laser diode with single mode fiber. The Multiple Quantum Well (MQW) structure is adopted to achieve stable dynamic single longitudinal mode operation over wide temperature range of 0 to +65 °C. It is designed

1 480 nm EDFA APPLICATION InGaAsP STRAINED MQW DC-PBH LASER DIODE MODULE

DESCRIPTION The NX7460LE is a 1 480 nm pumping laser diode module with optical isolator for an EDFA (Er Doped optical Fiber Amplifier) that can expand the transmission span and compensate optical losses. It has a strained Multiple Quantum Well (st-MQW) DC-PBH laser diode that features high output

InGaAsP STRAINED DC-PBH LASER DIODE MODULE 1 625 nm TELEMETRY APPLICATION

DESCRIPTION The NX7660JC is a 1 625 nm newly developed Strained Multiple Quantum Well (St-MQW) structure laser diode DIP module with single mode fiber and internal thermoelectric cooler. It is designed for light sources of telemetry equipment. FEATURES • Output power Pf = 5 mW MIN. @ IF = 65 mA

InGaAsP STRAINED DC-PBH LASER DIODE MODULE 1 625 nm TELEMETRY APPLICATION

DESCRIPTION The NX7660JC is a 1 625 nm newly developed Strained Multiple Quantum Well (St-MQW) structure laser diode DIP module with single mode fiber and internal thermoelectric cooler. It is designed for light sources of telemetry equipment. FEATURES • Output power Pf = 5 mW MIN. @ IF = 65 mA