16-Bit 1 MSPS SAR Unipolar ADC with Ref

GENERAL DESCRIPTION The AD7667is a 16-bit, 1 MSPS, charge redistribution SAR analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both serial

16-Bit, 250 kSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7610 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only seria

18-Bit, 2.5 LSB INL, 800 kSPS SAR ADC

GENERAL DESCRIPTION The AD7665 is a 16-bit, 570 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. It contains a high speed 16-bit sampling ADC, a resistor input scaler that allows various input ranges, an internal conversion clock, error

16-Bit, 750 kSPS, Unipolar/Bipolar Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7612 is a 16-bit charge redistribution successive approximation register (SAR), architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write only seria

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7952 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial

18-Bit, 2.5 LSB INL, 570 kSPS SAR ADC

GENERAL DESCRIPTION The AD7679 is an 18-bit, 570 kSPS, charge redistribution SAR, fully differential analog-to-digital converter that operates on a single 5 V power supply. The part contains a high speed 18-bit sampling ADC, an internal conversion clock, an internal reference buffer, error correc

16-Bit, 570 kSPS PulSAR Unipolar CMOS ADC

GENERAL DESCRIPTION The AD7664 is a 16-bit, 570 kSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, error correction circuits, and both serial and parallel syst

16-Bit, 1.5 LSB INL, 2 MSPS PulSAR ADC

GENERAL DESCRIPTION The AD7622 is a 16-bit, 2 MSPS, charge redistribution SAR, fully differential, analog-to-digital converter (ADC) that operates from a single 2.5 V power supply. The part contains a high speed, 16-bit sampling ADC, an internal conversion clock, an internal reference (and buffer

16-Bit 500 kSPS PulSAR Unipolar ADC with Reference

GENERAL DESCRIPTION The AD7652 is a 16-bit, 500 kSPS, charge redistribution SAR analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both seria

16位、500 kSPS、内置基准电压源的PulSAR®单极性ADC

AD7652是一款16位、500 kSPS、电荷再分配SAR型模数转换器（ADC），采用5 V单电源供电。该器件内置一个16位高速采样ADC、一个内部转换时钟、一个内部基准电压源、纠错电路，以及串行和并行系统接口端口。\n\n 该器件采用ADI公司的0.6微米高性能CMOS工艺制造，成本很低；提供48引脚LQFP或微型48引脚LFCSP两种封装；工作温度范围为-40°C至+85°C。 • 2.5 V内部基准电压：\n典型漂移量为7 ppm/°C\n\n• 吞吐量：500 kSPS\n\n• 16位分辨率\n\n• 模拟输入电压范围：0 V至2.5 V\n\n• 无流水线延迟\n\n• 并行和串行5 V/3 V接口\n\n• SPI®/QSPI™\n/MICROWIRE™/DSP 兼容;

16-Bit, 500 kSPS PulSAR Dual, 2-Channel, Simultaneous Sampling ADC

文件：548.57 Kbytes Page：28 Pages

18-Bit, 2.5 LSB INL, 800 kSPS SAR ADC

文件：983.09 Kbytes Page：28 Pages

16-Bit 500 kSPS PulSARTM Unipolar ADC with Reference

文件：804.26 Kbytes Page：28 Pages

18-Bit, 2.5 LSB INL, 800 kSPS SAR ADC

文件：983.09 Kbytes Page：28 Pages

16-Bit 500 kSPS PulSAR Unipolar ADC with Reference

文件：804.26 Kbytes Page：28 Pages

16-Bit 500 kSPS PulSAR Unipolar ADC with Reference

GENERAL DESCRIPTION The AD7652 is a 16-bit, 500 kSPS, charge redistribution SAR analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both seria

16-Bit 500 kSPS PulSAR Unipolar ADC with Reference

GENERAL DESCRIPTION The AD7652 is a 16-bit, 500 kSPS, charge redistribution SAR analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both seria

16-Bit 500 kSPS PulSAR Unipolar ADC with Reference

GENERAL DESCRIPTION The AD7652 is a 16-bit, 500 kSPS, charge redistribution SAR analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both seria

16-Bit 500 kSPS PulSAR Unipolar ADC with Reference

GENERAL DESCRIPTION The AD7652 is a 16-bit, 500 kSPS, charge redistribution SAR analog-to-digital converter that operates from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, an internal conversion clock, internal reference, error correction circuits, and both seria

16-Bit 500 kSPS PulSAR Unipolar ADC with Reference

文件：804.26 Kbytes Page：28 Pages

16-Bit 500 kSPS PulSARTM Unipolar ADC with Reference

文件：804.26 Kbytes Page：28 Pages

16-Bit 500 kSPS PulSARTM Unipolar ADC with Reference

文件：804.26 Kbytes Page：28 Pages

封装/外壳：48-VFQFN 裸露焊盘，CSP 包装：卷带（TR） 描述：IC ADC 16BIT SAR 48LFCSP 集成电路（IC） 模数转换器（ADC）

16-Bit 500 kSPS PulSARTM Unipolar ADC with Reference

文件：804.26 Kbytes Page：28 Pages

16-Bit 500 kSPS PulSARTM Unipolar ADC with Reference

文件：804.26 Kbytes Page：28 Pages

16-Bit 500 kSPS PulSARTM Unipolar ADC with Reference

文件：804.26 Kbytes Page：28 Pages

封装/外壳：48-LQFP 包装：托盘 描述：IC ADC 16BIT SAR 48LQFP 集成电路（IC） 模数转换器（ADC）

NTSC/PAL Digital Video Encoder

GENERAL DESCRIPTION The MSM7652 is a digital NTSC/PAL encoder. By inputting digital image data conforming to ITU Rec. 656 or ITURBT 601, it outputs selected analog composite video signals, analog S video signals or Y, R-Y, B-Y signals. For the scanning system, interlaced or noninterlaced mode can

LOW NOISE, CHOPPER-STABILIZED OPERATIONAL AMPLIFIER

文件：90.66 Kbytes Page：6 Pages

LOW NOISE, CHOPPER-STABILIZED OPERATIONAL AMPLIFIER

文件：90.66 Kbytes Page：6 Pages

LOW NOISE, CHOPPER-STABILIZED OPERATIONAL AMPLIFIER

文件：90.66 Kbytes Page：6 Pages