Pseudo Differential, 1MSPS, 12- & 10-Bit ADCs in 8-lead SOT-23

GENERAL DESCRIPTION The AD7441/AD74511 are, respectively, 10-/12-bit high speed, low power, single-supply, successive approximation (SAR), analog-to-digital converters (ADCs) that feature a pseudo differential analog input. These parts operate from a single 2.7 V to 5.25 V power supply and achiev

Pseudo Differential Input, 1 MSPS, 10-/12-Bit ADCs in an 8-Lead SOT-23

GENERAL DESCRIPTION The AD7441/AD74511 are, respectively, 10-/12-bit high speed, low power, single-supply, successive approximation (SAR), analog-to-digital converters (ADCs) that feature a pseudo differential analog input. These parts operate from a single 2.7 V to 5.25 V power supply and achiev

伪差分输入、1 MSPS、10位ADC，采用8引脚SOT-23封装

AD7441/AD7451分别是10位和12位、高速、低功耗、单电源、逐次逼近型(SAR)模数转换器(ADC)，采用伪差分模拟输入，工作电压为2.7 V至5.25 V单电源，最高吞吐量为1 MSPS，功耗极低。\n\n AD7441/AD7451内置一个低噪声、宽带宽、差分采样保持(T/H)放大器，可处理最高3.5 MHz的输入频率。外部基准电压通过VREF引脚输入，可在100 mV至VDD范围内变化，具体取决于电源和应用。\n\n 转换过程和数据采集通过/CS与串行时钟进行控制，从而为器件与微处理器或DSP接口创造了条件。输入信号在/CS的下降沿进行采样，而转换同时在此处 • 高吞吐量：1 MSPS\n\n• 额定电压(VDD)：2.7 V至5.25 V \n\n• 低功耗（最大吞吐量时）：\n最大4 mW（1 MSPS、VDD= 3 V）\n最大9.25 mW（1 MSPS、VDD = 5 V）\n\n• 宽输入带宽：70 dB信纳比（100 kHz输入频率）\n\n• 伪差分模拟输入;

Pseudo Differential Input, 1 MSPS, 10-/12-Bit ADCs in an 8-Lead SOT-23

GENERAL DESCRIPTION The AD7441/AD74511 are, respectively, 10-/12-bit high speed, low power, single-supply, successive approximation (SAR), analog-to-digital converters (ADCs) that feature a pseudo differential analog input. These parts operate from a single 2.7 V to 5.25 V power supply and achiev

Quad-Channel, Software Configurable Input/Output

FEATURES Quad-channel software configurable input/output circuit Screw terminals protected to ±40 V Line protectors to block power from the screw terminals to supplies Six configurable modes Voltage input Current input Voltage output Current output Digital input RTD measurement Internal

Quad-Channel, Software Configurable Input/Output

FEATURES Quad-channel software configurable input/output circuit Screw terminals protected to ±40 V Line protectors to block power from the screw terminals to supplies Six configurable modes Voltage input Current input Voltage output Current output Digital input RTD measurement Internal

Quad-Channel, Software Configurable Input/Output

FEATURES Quad-channel software configurable input/output circuit Screw terminals protected to ±40 V Line protectors to block power from the screw terminals to supplies Six configurable modes Voltage input Current input Voltage output Current output Digital input RTD measurement Internal

Quad-Channel, Software Configurable Input/Output

FEATURES Quad-channel software configurable input/output circuit Screw terminals protected to ±40 V Line protectors to block power from the screw terminals to supplies Six configurable modes Voltage input Current input Voltage output Current output Digital input RTD measurement Internal

软件可配置的四通道输入/输出

AD74413R是一款软件可配置的四通道输入/输出解决方案，适用于楼宇和过程控制应用。AD74413R包含用于模拟输出、模拟输入、数字输入、电阻温度检测器(RTD)和热电偶测量的功能。这些功能通过串行外设接口(SPI)集成在一个单芯片解决方案中。\n\n 该套件包括一个16位Σ-Δ模数转换器(ADC)和四个可配置的13位数模转换器(DAC)，可提供四个可配置的输入/输出通道和一套诊断功能。\n\n AD74413R可提供多种模式。这些模式是电压输出、电流输出、电压输入、外部供电的电流输入、环路供电的电流输入、外部RTD测量、数字输入逻辑和环路供电的数字输入。\n\n •软件可配置的四通道输入/输出电路\n\n• 可承受 ±40 V 直流电压的螺纹端子\n\n• 阻止电力从螺纹端子流向电源的线路保护装置\n\n• 用户可配置的模式\n\n• 电压输入\n\n• 电流输入\n\n• 电压输出\n\n• 电流输出\n\n• 数字输入\n\n• RTD 测量;

Quad-Channel, Software Configurable Input and Output with HART Modem

FEATURES ► Quad-channel software configurable input and output ► Adaptive power switching reduces power dissipation by 40% ► Multiple configurable modes to a single pin ► Voltage input/output ► Current input/output ► Digital input/output ► 2- or 3-wire RTD measurement ► Thermocouple me

Quad-Channel, Software Configurable Input and Output with HART Modem

FEATURES ► Quad-channel software configurable input and output ► Adaptive power switching reduces power dissipation by 40% ► Multiple configurable modes to a single pin ► Voltage input/output ► Current input/output ► Digital input/output ► 2- or 3-wire RTD measurement ► Thermocouple me

Quad-Channel, Software Configurable Input and Output with HART Modem

FEATURES ► Quad-channel software configurable input and output ► Adaptive power switching reduces power dissipation by 40% ► Multiple configurable modes to a single pin ► Voltage input/output ► Current input/output ► Digital input/output ► 2- or 3-wire RTD measurement ► Thermocouple me

Pseudo Differential, 1MSPS, 12- & 10-Bit ADCs in 8-lead SOT-23

GENERAL DESCRIPTION The AD7441/AD74511 are, respectively, 10-/12-bit high speed, low power, single-supply, successive approximation (SAR), analog-to-digital converters (ADCs) that feature a pseudo differential analog input. These parts operate from a single 2.7 V to 5.25 V power supply and achiev

Pseudo Differential Input, 1 MSPS, 10-/12-Bit ADCs in an 8-Lead SOT-23

GENERAL DESCRIPTION The AD7441/AD74511 are, respectively, 10-/12-bit high speed, low power, single-supply, successive approximation (SAR), analog-to-digital converters (ADCs) that feature a pseudo differential analog input. These parts operate from a single 2.7 V to 5.25 V power supply and achiev

Pseudo Differential, 1MSPS, 12- & 10-Bit ADCs in 8-lead SOT-23

GENERAL DESCRIPTION The AD7441/AD74511 are, respectively, 10-/12-bit high speed, low power, single-supply, successive approximation (SAR), analog-to-digital converters (ADCs) that feature a pseudo differential analog input. These parts operate from a single 2.7 V to 5.25 V power supply and achiev

Pseudo Differential Input, 1 MSPS, 10-/12-Bit ADCs in an 8-Lead SOT-23

GENERAL DESCRIPTION The AD7441/AD74511 are, respectively, 10-/12-bit high speed, low power, single-supply, successive approximation (SAR), analog-to-digital converters (ADCs) that feature a pseudo differential analog input. These parts operate from a single 2.7 V to 5.25 V power supply and achiev

Pseudo Differential Input, 1 MSPS, 10-/12-Bit ADCs in an 8-Lead SOT-23

GENERAL DESCRIPTION The AD7441/AD74511 are, respectively, 10-/12-bit high speed, low power, single-supply, successive approximation (SAR), analog-to-digital converters (ADCs) that feature a pseudo differential analog input. These parts operate from a single 2.7 V to 5.25 V power supply and achiev

Pseudo Differential Input, 1 MSPS, 10-/12-Bit ADCs in an 8-Lead SOT-23

文件：722.52 Kbytes Page：25 Pages

封装/外壳：64-WFQFN 裸露焊盘，CSP 包装：卷带（TR） 描述：QUAD CHANNEL FLEXI IO; 16-BIT AD 集成电路（IC） ADC/DAC - 特殊用途

封装/外壳：64-WFQFN 裸露焊盘，CSP 包装：管件 描述：QUAD CHANNEL FLEXI IO; 16-BIT AD 集成电路（IC） ADC/DAC - 特殊用途

Quad-Channel, Software Configurable Input and Output

文件：1.40882 Mbytes Page：70 Pages

Quad-Channel, Software Configurable Input and Output

文件：1.40882 Mbytes Page：70 Pages

Quad-Channel, Software Configurable Input and Output

文件：1.40882 Mbytes Page：70 Pages

Quad-Channel, Software Configurable Input and Output with HART Modem

Picture-in-picture Controller for TVs and VCRs

Overview The LC7441N, 7441NE are picture-in picture (PIP) system controller ICs for use in NTSC, PAL or multi-system (both NTSC and PAL) TVs and VCRs. The LC7441 PIP system configuration requires discrete LC7480 A/D converter and memory ICs. Features • NTSC, PAL and multi-system compatibility.

Picture-in-picture Controller for TVs and VCRs

Overview The LC7441N, 7441NE are picture-in picture (PIP) system controller ICs for use in NTSC, PAL or multi-system (both NTSC and PAL) TVs and VCRs. The LC7441 PIP system configuration requires discrete LC7480 A/D converter and memory ICs. Features • NTSC, PAL and multi-system compatibility.

Picture-in-picture Controller for TVs and VCRs

Overview The LC7441N, 7441NE are picture-in picture (PIP) system controller ICs for use in NTSC, PAL or multi-system (both NTSC and PAL) TVs and VCRs. The LC7441 PIP system configuration requires discrete LC7480 A/D converter and memory ICs. Features • NTSC, PAL and multi-system compatibility.

SUPER BRIGHT T-1 (3mm) LED LAMP Water Clear

SUPER BRIGHT T-1 (3mm) LED LAMP - Water Clear

SUPER BRIGHT T-1 (3mm) LED LAMP -WATER CLEAR

文件：184.15 Kbytes Page：2 Pages