Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Precision, Dual-Channel Instrumentation Amplifier

GENERAL DESCRIPTION The AD8222 is a dual-channel, high performance instrumentation amplifier that requires only one external resistor per amplifier to set gains of 1 to 10,000. The AD8222 is the first dual-instrumentation amplifier in the small 4 mm × 4mm LFCSP. It requires the same board area a

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

单电源、轨到轨、低成本仪表放大器

AD623是一款集成式单电源或双电源仪表放大器，采用3 V至12 V电源电压时提供轨到轨输出摆幅。它可以通过单一增益设置电阻进行编程，并遵照8引脚工业标准引脚排列配置，赋予用户出众的灵活性。不接外部电阻时，AD623采用单位增益配置(G = 1)；连接外部电阻时，AD623可通过编程实现最高增益1000。\n\n 提高交流共模抑制比(CMRR)并增加增益可使AD623具有出色的精度；由于CMRR在最高200 Hz时保持稳定，因此线路噪声谐波得到抑制。AD623具有宽输入共模范围，可以放大共模电压低至地电压以下150 mV的信号。AD623采用双极性和单极性电源供电，能保持出色的性能。 • 易于使用\n\n• 轨到轨输出摆幅\n\n• 输入电压范围达到地电压以下150 mV（单电源）\n\n• 低功耗、550 μA静态电流（最大值）\n\n• 增益通过一个外部电阻设置\n• 增益范围：1至1000\n\n\n\n\n• 14引脚、6 mm × 5.6 mm × 2.2 mm、LCC封装;

Wide Supply Range, Rail-to-Rail

文件：805.88 Kbytes Page：28 Pages

Wide Supply Range, Micropower,

文件：529.22 Kbytes Page：28 Pages

Low Noise, Low Gain Drift, G = 2000

文件：361.17 Kbytes Page：20 Pages

Zero Drift, Digitally Programmable Instrumentation Amplifier

文件：725.71 Kbytes Page：24 Pages

10 MHz, 20 V/關s, G = 1, 10, 100, 1000 i CMOS짰 Programmable Gain Instrumentation Amplifier

GENERAL DESCRIPTION The AD8253 is an instrumentation amplifier with digitally programmable gains that has GΩ input impedance, low output noise, and low distortion making it suitable for interfacing with sensors and driving high sample rate analog-to-digital converters (ADCs). It has high bandwidt

8CH LOW INPUT ACTIVE DARLINGTON SINK DRIVER

The TD62384AP / F / AF and TD62385AP / F / AF are non−inverting transistor arrays, which are comprised of eight NPN darlington output stages and PNP input stages. These devices can be operated by source input voltage and are suitable for operations with a 5-V general purposed logic IC such as 5-V

8CH LOW INPUT ACTIVE DARLINGTON SINK DRIVER

TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC 8 CH LOW INPUT ACTIVE DARLINGTON SINK DRIVER

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

GENERAL DESCRIPTION The AD623 is an integrated single-supply instrumentation amplifier that delivers rail-to-rail output swing on a 3 V to 12 V supply. The AD623 offers superior user flexibility by allowing single gain set resistor programming and by conforming to the 8-lead industry standard p

Single-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

文件：1.43548 Mbytes Page：24 Pages

Single and Dual-Supply, Rail-to-Rail, Low Cost Instrumentation Amplifier

文件：1.33044 Mbytes Page：27 Pages

Package Drawings and Specifications

文件：159.02 Kbytes Page：12 Pages

封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 功能：全极开关 包装：管件 描述：MAGNETIC SWITCH OMNIPOLAR 8MSOP 传感器，变送器 磁性传感器 - 开关（固态）

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 功能：全极开关 包装：管件 描述：MAGNETIC SWITCH OMNIPOLAR 8SOIC 传感器，变送器 磁性传感器 - 开关（固态）

8CH LOW INPUT ACTIVE DARLINGTON SINK DRIVER

8CH LOW INPUT ACTIVE DARLINGTON SINK DRIVER

Evaluation Board for the AD623

文件：287.42 Kbytes Page：4 Pages

Evaluation Board for the AD623

文件：287.42 Kbytes Page：4 Pages

PNP high-voltage transistors

DESCRIPTION PNP high-voltage transistor in a SOT89 plastic package. NPN complements: BF620 and BF622. FEATURES • Low current (max. 50 mA) • High voltage (max. 300 V). APPLICATIONS • Video output stages.

32-Channel 128-Level Amplitude Gray-Shade Display Column Driver

General Description The HV623 is a 32-channel driver IC for gray shade display use. It is designed to produce varying output voltages between 3 and 80 volts. This amplitude modulation at the output is facilitated by an external ramp voltage VR. See Theory of Operation for detailed explanation. F

Silicon Rectifier Fast Recovery, Dual, Center Tap

Description: The NTE623 and NTE624 are dual, fast recovery silicon rectifiers in a TO220 type package designed for special applications such as DC power supplies, inverters, converters, ultrasonic systems, choppers and low RF interference. Features: Low Forward Voltage High Current C

8/16-Bit Micros

Coming Soon. If you have some information on related parts, please share useful information by adding links below.