Low Power Mixer/Limiter/RSSI 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD608 provides a low power, low distortion, low noise mixer as well as a complete, monolithic logarithmic/limiting amplifier that uses a successive-detection technique. In addition, the AD608 provides both a high speed received signal strength indicator (RSSI) output with

低功耗混频器/限幅器/RSSI 3 V接收机IF子系统

AD608提供一个低功耗、低失真、低噪声混频器和一个采用逐次检测技术的完整单芯片对数/限幅放大器。此外，AD608提供80 dB动态范围的高速接收信号强度指示(RSSI)输出以及硬限幅输出。RSSI输出来自一个二极点后解调低通滤波器，提供0.2 V至1.8 V的可加载输出电压。AD608采用2.7 V至5.5 V单电源供电，3 V工作电压下的典型功耗为21 mW。\n\nRF和本振(LO)带宽均超过500MHz。在典型的IF应用中，AD608可以接受240MHz表面声波(SAW)滤波器的输出，以24 dB的转换增益(ZIF = 165 Ω)将其下变频到标称10.7 MHz IF频率。AD608 • 混频器\n1 dB压缩点：−15 dBm\nIP3：−5 dBm\n转换增益：24 dB\n输入带宽：>500 MHz;

Low Power Mixer/Limiter/RSSI 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD608 provides a low power, low distortion, low noise mixer as well as a complete, monolithic logarithmic/limiting amplifier that uses a successive-detection technique. In addition, the AD608 provides both a high speed received signal strength indicator (RSSI) output with

Low Power Mixer/Limiter/RSSI 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD608 provides a low power, low distortion, low noise mixer as well as a complete, monolithic logarithmic/limiting amplifier that uses a successive-detection technique. In addition, the AD608 provides both a high speed received signal strength indicator (RSSI) output with

Low Power Mixer/Limiter/RSSI 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD608 provides a low power, low distortion, low noise mixer as well as a complete, monolithic logarithmic/limiting amplifier that uses a successive-detection technique. In addition, the AD608 provides both a high speed received signal strength indicator (RSSI) output with

Low Power Mixer/Limiter/RSSI 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD608 provides a low power, low distortion, low noise mixer as well as a complete, monolithic logarithmic/limiting amplifier that uses a successive-detection technique. In addition, the AD608 provides both a high speed received signal strength indicator (RSSI) output with

Low Power Mixer/Limiter/RSSI 3 V Receiver IF Subsystem

GENERAL DESCRIPTION The AD608 provides a low power, low distortion, low noise mixer as well as a complete, monolithic logarithmic/limiting amplifier that uses a successive-detection technique. In addition, the AD608 provides both a high speed received signal strength indicator (RSSI) output with

Low Power Mixer/Limiter/RSSI 3 V Receiver IF Subsystem

文件：326.85 Kbytes Page：16 Pages

封装/外壳：16-SOIC（0.154"，3.90mm 宽） 包装：散装 描述：IC MIXER 500MHZ DOWN CONV 16SOIC RF/IF，射频/中频和 RFID 射频混频器

封装/外壳：16-SOIC（0.154"，3.90mm 宽） 包装：托盘 描述：IC MIXER 500MHZ DOWN CONV 16SOIC RF/IF，射频/中频和 RFID 射频混频器

Wide bandwidth video amplifier IC in-phase amplifier

■ Overview The AN608P is an amplifier IC with a 20 dB gain, a non-inverted output and a wide bandwidth (10MHz). It is best suited to video amplifier and sense amplifier. ■ Features • Wide bandwidth (10 MHz) • 20 dB non-inverting amplifier • 4-pin SIP plastic package ■ Applications • Video a

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound ● Glass passivated junction in P600 package ● 6 ampere operation at TA=60 ¢J with no thermal runaway ● Exce

FAST SWITCHING RECOVERY RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

FEATURES ● Low cost ● Diffused junction ● Low forward voltage drop ● High current capability Fast switching for high efficiency ● The plastic meterial carries U/L recognition 94V-O ● Exceeds environmental standards of MIL-S-19500/228

ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound ● Void-free Plastic in P600 package ● 6.0 ampere operation at TA=55 ¢J with no thermal runaway ● Ex

GLASS PASSIVATED JUNCTION ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE 50 to 800 Volts CURRENT 6.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound • Exceeds environmental standards of MIL-S-19500/228. • Ultra Fast switching for high efficiency. • Bot