50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

50 MHz、80 dB解调对数放大器，提供限幅器输出

AD606是一款采用9级“连续检波”技术的完整、单芯片对数放大器，可提供对数输出和限幅输出。对数输出来自一个三极后解调低通滤波器，可提供+0.1 V DC至+4 V DC的可加载输出电压。对数调整动态范围为：当正弦输入为-75 dBm时，输出为+0.5 V；当输入为+5 dBm时，输出为+3.5 V。超出此范围时，对数线性度典型值在±0.4 dB以内。所有调整参数均与电源电压成比例。\n\nAD606能以降低的线性度在这些限值之上和之下工作，以提供宽达90 dB的转换范围。第二低通滤波器自动将第一级的输入失调电压抵消至微伏以下水平。如果给两个滤波器增加外部电容，则该器件可在低至几赫兹的输入频率 • 对数放大器性能\n动态范围：-75 dBm至+5 dBm\n输入噪声：<1.5 nV/√Hz\n工作频率：50 MHz以上\n37.5 mV/dB电压输出\n片内低通输出滤波器;

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION\nThe AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage of +   Logarithmic Amplifier Performance\n     –75 dBm to +5 dBm Dynamic Range\n     ≤1.5 nV/√Hz Input Noise\n     Usable to 50 MHz\n     37.5 mV/dB Voltage Output\n     On-Chip Low-Pass Output Filter\n  Limiter Performance\n     61 dB Output Flatness over 80 dB Range\n     638 Phase Stability at 10.7 MH;

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

PRODUCT DESCRIPTION The AD606 is a complete, monolithic logarithmic amplifier using a 9-stage “successive-detection” technique. It provides both logarithmic and limited outputs. The logarithmic output is from a three-pole post-demodulation low-pass filter and provides a loadable output voltage

50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output

文件：452.61 Kbytes Page：12 Pages

Package Drawings and Specifications

文件：159.02 Kbytes Page：12 Pages

封装/外壳：8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 功能：全极开关 包装：管件 描述：MAGNETIC SWITCH OMNIPOLAR 8MSOP 传感器，变送器 磁性传感器 - 开关（固态）

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 功能：全极开关 包装：管件 描述：MAGNETIC SWITCH OMNIPOLAR 8SOIC 传感器，变送器 磁性传感器 - 开关（固态）

SEMICONDUCTORS

文件：2.43533 Mbytes Page：31 Pages

VOLTAGE 50 to 1000 Volts CURRENT - P.C. MTG 3A , HEAT-SINK MTG 6A

VOLTAGE 50 to 1000 Volts CURRENT - P.C. MTG 3A , HEAT-SINK MTG 6A FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O. • Surge Overload Ratings to 125 Amperes. • Low forward voltage, and reverse leakage. • Small size , simple installation.

DPAK SURFACE MOUNT SUPER FAST RECOVERY RECTIFIER(VOLTAGE - 200 to 600 Volts CURRENT - 6.0 Amperes)

VOLTAGE 200 to 600 Volts CURRENT 6.0 Amperes FEATURES • Superfast recovery times-epitaxial construction. • Low forward voltage, high current capability. • Exceeds environmental standards of MIL-S-19500/228. • Hermetically sealed. • Low leakage. • High surge capability. • Plastic package ha

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound ● Glass passivated junction in P600 package ● 6 ampere operation at TA=60 ¢J with no thermal runaway ● Exce

FAST SWITCHING RECOVERY RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

FEATURES ● Low cost ● Diffused junction ● Low forward voltage drop ● High current capability Fast switching for high efficiency ● The plastic meterial carries U/L recognition 94V-O ● Exceeds environmental standards of MIL-S-19500/228

GLASS PASSIVATED JUNCTION ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

VOLTAGE 50 to 800 Volts CURRENT 6.0 Amperes FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound • Exceeds environmental standards of MIL-S-19500/228. • Ultra Fast switching for high efficiency. • Bot