丝印代码：AD595；SN74ACT595 8-Bit Shift Register With TTL-Compatible Inputs And Output Registers

1 Features • Operating voltage range of 4.5V to 5.5V • TTL-compatible inputs • Continuous ±24mA output drive at 5V • Supports up to ±75mA output drive at 5V in short bursts • Drives 50Ω transmission lines • Fast operation with delay of 11.9ns max 2 Applications • Increase the number of

丝印代码：AD595；SN74ACT595 8-Bit Shift Register With TTL-Compatible Inputs And Output Registers

1 Features • Operating voltage range of 4.5V to 5.5V • TTL-compatible inputs • Continuous ±24mA output drive at 5V • Supports up to ±75mA output drive at 5V in short bursts • Drives 50Ω transmission lines • Fast operation with delay of 11.9ns max 2 Applications • Increase the number of

集成冷结温度补偿的K型热电偶放大器

AD594/AD595是完整的单芯片仪表放大器和热电偶冷结补偿器。通过将冰点基准源与预校准放大器相结合，该器件可直接从热电偶信号产生高电平 (10 mV/°C) 输出。引脚绑定选项使本产品可用作线性放大器补偿器或采用固定或远程设定点控制的开关输出设定点控制器。它可用于直接放大补偿电压，从而成为提供低阻抗电压输出的独立摄氏温度传感器。AD594/AD595内置一个热电偶故障报警器，可指示一个或两个热电偶引脚是否断开。报警输出具有灵活的格式，包括TTL驱动能力。AD594/AD595可采用单端电源（包括+5 V）供电；而通过内置负电源，还可测量0°C以下的温度。为了尽量减少自热效应，无负载的AD5 • 针对J型(AD594)或K型(AD595)热电偶预调整\n• 可配合T型热电偶输入使用\n• 低阻抗电压输出： 10 mV/°C\n• 内置冰点补偿\n• 宽电源电压范围：+5 V至±15 V\n• 低功耗：<1 mW（典型值）\n• 热电偶故障报警器\n• 激光晶圆调整，校准精度达1°C\n• 设定点工作模式\n• 独立式摄氏温度计工作模式\n• 高阻抗差分输入\n• 侧面钎焊DIP封装或低成本CERDIP封装;

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

文件：131.1 Kbytes Page：8 Pages

丝印代码：AD595Q；SN74ACT595-Q1 Automotive 8-Bit Shift Register With TTL-Compatible Inputs And Output Registers

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Operating voltage range of 4.5V to 5.5V • TTL-compatible i

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

文件：140.8 Kbytes Page：8 Pages

封装/外壳：14-CDIP（0.300"，7.62mm） 功能：热电偶放大器 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC THERMOCOUPLE INSTR AMP 14CDIP 集成电路（IC） 热管理

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

文件：131.1 Kbytes Page：8 Pages

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

文件：146.39 Kbytes Page：8 Pages

封装/外壳：14-CDIP（0.300"，7.62mm） 功能：热电偶放大器 包装：管件 描述：IC THERMOCOUPLE A W/COMP 14CDIP 集成电路（IC） 热管理

SEMICONDUCTORS

文件：2.43533 Mbytes Page：31 Pages

SEMICONDUCTORS

文件：2.43533 Mbytes Page：31 Pages

SEMICONDUCTORS

文件：2.43533 Mbytes Page：31 Pages

Silicon Diode, Dual, Common Cathode, High Speed

Description: The NTE595 consists of two silicon diodes in an SOT–23 type surface mount package. The cathodes are common and the device is intended for high–speed switching applications in thick and thin–film circuits.

MOSMIC for TV-Tuner Prestage with 5 V Supply Voltage

Features • Integrated gate protection diodes • Low noise figure • High gain • Biasing network on chip • Improved cross modulation at gain reduction • High AGC-range • SMD package • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Applications    

MOSMIC for TV-Tuner Prestage with 5 V Supply Voltage

Features • Integrated gate protection diodes • Low noise figure • High gain • Biasing network on chip • Improved cross modulation at gain reduction • High AGC-range • SMD package • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Applications    

MOSMIC for TV-Tuner Prestage with 5 V Supply Voltage

Features • Integrated gate protection diodes • Low noise figure • High gain • Biasing network on chip • Improved cross modulation at gain reduction • High AGC-range • SMD package • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Applications    

RF & MICROWAVE TRANSISTORS TV LINEAR APPLICATIONS

DESCRIPTION The SD1732 is a gold metallized epitaxial silicon NPN planar transistor using diffused emitter ballast resistors for high linearity Class A operation in UHF and Band IV, V television transmitters and transposes. FEATURES SUMMARY ■ 470 - 860 MHz ■ 25 VOLTS ■ CLASS A PUSH PULL ■ DE