Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

集成冷结温度补偿的J型热电偶放大器

AD594/AD595是完整的单芯片仪表放大器和热电偶冷结补偿器。通过将冰点基准源与预校准放大器相结合，该器件可直接从热电偶信号产生高电平(10 mV/°C)输出。引脚绑定选项使本产品可用作线性放大器补偿器或采用固定或远程设定点控制的开关输出设定点控制器。它可用于直接放大补偿电压，从而成为提供低阻抗电压输出的独立摄氏温度传感器。 \nAD594/AD595内置一个热电偶故障报警器，可指示一个或两个热电偶引脚是否断开。报警输出具有灵活的格式，包括TTL驱动能力。 \nAD594/AD595可采用单端电源（包括+5 V）供电；而通过内置负电源，还可测量0°C以下的温度。为了尽量减少自热效应，无负 • 针对J型(AD594)或K型(AD595)热电偶预调整\n• 可配合T型热电偶输入使用 \n• 低阻抗电压输出：10 mV/°C \n• 内置冰点补偿 \n• 宽电源电压范围：+5 V至±15 V \n• 低功耗：<1 mW（典型值）\n• 热电偶故障报警器\n• 激光晶圆调整，校准精度达1°C \n• 设定点工作模式\n• 独立式摄氏温度计工作模式\n• 高阻抗差分输入\n• 侧面钎焊DIP封装或低成本CERDIP封装;

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

文件：131.1 Kbytes Page：8 Pages

High Precision, Impedance, and Electrochemical Front End

FEATURES Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual ou

高精度、阻抗和电化学前端

AD5940和AD5941均为高精度、低功耗模拟前端(AFE)，专为需要基于电化学测量技术的高精度便携式应用而设计，如电流、伏安或阻抗测量。AD5940/AD5941设计用于皮肤阻抗和人体阻抗测量，并与AD8233 AFE配合构成完整的生物电势或生物电位测量系统。AD5940/AD5941针对电化学有毒气体检测而设计。\n\n AD5940/AD5941包括两个高精度激励环路和一个通用测量通道，可以对被测传感器进行广泛的测量。第一个激励环路包括一个超低功耗、双通道输出串数模转换器(DAC)和一个低功耗、低噪声恒电势器。该DAC的一个输出可控制恒电势器的同相输入，另一个输出控制跨阻放大 • 模拟输入\n• 16位ADC，提供800 kSPS和1.6 MSPS选项\n\n• 电压、电流和阻抗测量能力\n• 内部和外部电流和电压通道\n\n• 超低泄漏开关矩阵和输入多路复用器\n\n\n\n\n• 输入缓冲器和可编程增益放大器\n\n\n\n\n• 电压DACs\n• 输出范围为0.2 V至2.4 V的双通道输出电压DAC\n\n\n\n\n• 12位VBIAS0输出到偏置恒电势器\n• 6位VZERO0输出到偏置TIA\n\n• 超低功耗：1 µA\n\n• 1个高速、12位DAC\n• 传感器输出范围至：±607 mV\n\n• 输出上具有2和0.05增益设置的可编程增益放大;

High Precision, Impedance, and Electrochemical Front End

FEATURES ► Analog input ► 16-bit ADC with both 800 kSPS and 1.6 MSPS options ► Voltage, current, and impedance measurement capability ► Internal and external current and voltage channels ► Ultralow leakage switch matrix and input mux ► Input buffers and programmable gain amplifier ► Voltage

High Precision, Impedance, and Electrochemical Front End

FEATURES Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual ou

High Precision, Impedance, and Electrochemical Front End

FEATURES ► Analog input ► 16-bit ADC with both 800 kSPS and 1.6 MSPS options ► Voltage, current, and impedance measurement capability ► Internal and external current and voltage channels ► Ultralow leakage switch matrix and input mux ► Input buffers and programmable gain amplifier ► Voltage

High Precision, Impedance, and Electrochemical Front End

FEATURES Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual ou

High Precision, Impedance, and Electrochemical Front End

FEATURES ► Analog input ► 16-bit ADC with both 800 kSPS and 1.6 MSPS options ► Voltage, current, and impedance measurement capability ► Internal and external current and voltage channels ► Ultralow leakage switch matrix and input mux ► Input buffers and programmable gain amplifier ► Voltage

High Precision, Impedance, and Electrochemical Front End

FEATURES ► Analog input ► 16-bit ADC with both 800 kSPS and 1.6 MSPS options ► Voltage, current, and impedance measurement capability ► Internal and external current and voltage channels ► Ultralow leakage switch matrix and input mux ► Input buffers and programmable gain amplifier ► Voltage

High Precision, Impedance, and Electrochemical Front End

FEATURES Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual ou

High Precision, Impedance, and Electrochemical Front End

FEATURES ► Analog input ► 16-bit ADC with both 800 kSPS and 1.6 MSPS options ► Voltage, current, and impedance measurement capability ► Internal and external current and voltage channels ► Ultralow leakage switch matrix and input mux ► Input buffers and programmable gain amplifier ► Voltage

High Precision, Impedance, and Electrochemical Front End

FEATURES Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual ou

高精度、阻抗和电化学前端

AD5940和AD5941均为高精度、低功耗模拟前端(AFE)，专为需要基于电化学测量技术的高精度便携式应用而设计，如电流、伏安或阻抗测量。AD5940/AD5941设计用于皮肤阻抗和人体阻抗测量，并与AD8233 AFE配合构成完整的生物电势或生物电位测量系统。AD5940/AD5941针对电化学有毒气体检测而设计。\n\n AD5940/AD5941包括两个高精度激励环路和一个通用测量通道，可以对被测传感器进行广泛的测量。第一个激励环路包括一个超低功耗、双通道输出串数模转换器(DAC)和一个低功耗、低噪声恒电势器。该DAC的一个输出可控制恒电势器的同相输入，另一个输出控制跨阻放大 • 模拟输入\n• 16位ADC，提供800 kSPS和1.6 MSPS选项\n\n• 电压、电流和阻抗测量能力\n• 内部和外部电流和电压通道\n\n• 超低泄漏开关矩阵和输入多路复用器\n\n\n\n\n• 输入缓冲器和可编程增益放大器\n\n\n\n\n• 电压DACs\n• 输出范围为0.2 V至2.4 V的双通道输出电压DAC\n\n\n\n\n• 12位VBIAS0输出到偏置恒电势器\n• 6位VZERO0输出到偏置TIA\n\n• 超低功耗：1 µA\n\n• 1个高速、12位DAC\n• 传感器输出范围至：±607 mV\n\n• 输出上具有2和0.05增益设置的可编程增益放大;

High Precision, Impedance, and Electrochemical Front End

FEATURES Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual ou

High Precision, Impedance, and Electrochemical Front End

FEATURES ► Analog input ► 16-bit ADC with both 800 kSPS and 1.6 MSPS options ► Voltage, current, and impedance measurement capability ► Internal and external current and voltage channels ► Ultralow leakage switch matrix and input mux ► Input buffers and programmable gain amplifier ► Voltage

High Precision, Impedance, and Electrochemical Front End

FEATURES ► Analog input ► 16-bit ADC with both 800 kSPS and 1.6 MSPS options ► Voltage, current, and impedance measurement capability ► Internal and external current and voltage channels ► Ultralow leakage switch matrix and input mux ► Input buffers and programmable gain amplifier ► Voltage

High Precision, Impedance, and Electrochemical Front End

FEATURES Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual ou

High Precision, Impedance, and Electrochemical Front End

FEATURES Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual ou

High Precision, Impedance, and Electrochemical Front End

FEATURES ► Analog input ► 16-bit ADC with both 800 kSPS and 1.6 MSPS options ► Voltage, current, and impedance measurement capability ► Internal and external current and voltage channels ► Ultralow leakage switch matrix and input mux ► Input buffers and programmable gain amplifier ► Voltage

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

PRODUCT DESCRIPTION The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a ther mocouple signal. Pin-stra

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

文件：146.39 Kbytes Page：8 Pages

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

文件：140.8 Kbytes Page：8 Pages

High Precision, Impedance, and Electrochemical Front End

文件：1.95252 Mbytes Page：130 Pages

High Precision, Impedance, and Electrochemical Front End

文件：1.95252 Mbytes Page：130 Pages

High Precision, Impedance, and Electrochemical Front End

文件：1.95252 Mbytes Page：130 Pages

封装/外壳：56-UFBGA，WLCSP 包装：托盘 描述：IC AFE 1 CHAN 16BIT 56WLCSP 集成电路（IC） 模拟前端（AFE）

包装：托盘 描述：BIO-IMPEDANCE \u0026 ELECTROCHEMICAL 集成电路（IC） 模拟前端（AFE）

SEMICONDUCTORS

文件：2.43533 Mbytes Page：31 Pages

Monolithic Thermocouple Amplifiers with Cold Junction Compensation

文件：146.39 Kbytes Page：8 Pages

Silicon Diode, Bandswitch

Description: The NTE594 is a silicon band switching diode in an SOT–23 type surface mount package intended for thick and thin–film circuits.

MOSMIC for TV-Tuner Prestage with 5 V Supply Voltage

Features • Integrated gate protection diodes • Low noise figure • High gain • Biasing network on chip • Improved cross modulation at gain reduction • High AGC-range • SMD package • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Applications    

PRECISION SWITCHMODE PULSE WIDTH MODULATION CONTROL CIRCUIT

The TL594 is a fixed frequency, pulse width modulation control circuit designed primarily for Switchmode power supply control. •Complete Pulse Width Modulation Control Circuitry •On–Chip Oscillator with Master or Slave Operation •On–Chip Error Amplifiers •On–Chip 5.0 V Reference,

PRECISION SWITCHMODE PULSE WIDTH MODULATION CONTROL CIRCUIT

The TL594 is a fixed frequency, pulse width modulation control circuit designed primarily for Switchmode power supply control. •Complete Pulse Width Modulation Control Circuitry •On–Chip Oscillator with Master or Slave Operation •On–Chip Error Amplifiers •On–Chip 5.0 V Reference,

PRECISION SWITCHMODE PULSE WIDTH MODULATION CONTROL CIRCUIT

The TL594 is a fixed frequency, pulse width modulation control circuit designed primarily for Switchmode power supply control. •Complete Pulse Width Modulation Control Circuitry •On–Chip Oscillator with Master or Slave Operation •On–Chip Error Amplifiers •On–Chip 5.0 V Reference,