System Ready, 18-Bit 짹1 LSB INL

GENERAL DESCRIPTION The AD57801 is a true 18-bit, unbuffered voltage output digitalto-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5780 accepts a positive reference input range of 5 V to VDD − 2.5 V and a negative reference input range of VSS + 2.5 V to 0 V. Bot

Ultra Stable, 16-Bit 짹0.5 LSB INL

GENERAL DESCRIPTION The AD57601 is a true 16-bit, unbuffered voltage output digital-to-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5760 accepts a positive reference input range of 5 V to VDD − 2.5 Vand a negative reference input range of VSS + 2.5 V to 0 V. The

可供系统立即使用的20位、±2 LSB INL电压输出DAC

AD579011是一款单通道、20位、无缓冲电压输出DAC，采用最高33 V的双极性电源供电。正基准电压输入范围为5 V至VDD – 2.5V，负基准电压输入范围为VSS + 2.5 V至0V。相对精度最大值为±2 LSB，保证工作单调性，微分非线性(DNL)最大值为-1 LSB至+3 LSB。   这款器件采用多功能三线式串行接口，能够以最高50 MHz的时钟速率工作，并与标准SPI®、QSPI™、MICROWIRE™、DSP接口兼容。片内提供基准电压缓冲。它内置上电复位电路，确保DAC上电后输出至0 V并保持已知输出阻抗状态，直到对该器件执行一次有效的写操作为止。禁用特性可将输出 • 单通道20位电压输出DAC，±2 LSB INL\n\n• 输出噪声频谱密度：8 nV/√Hz\n\n• 线性误差长期稳定性：0.1 LSB\n\n• 增益误差温度系数：±0.018 ppm/°C\n\n• 输出电压建立时间：2.5 μs\n\n• 中间电平毛刺脉冲：3.5 nV-s;

Voltage Output DAC

文件：965.99 Kbytes Page：27 Pages

System Ready, 20-Bit, 짹2LSB INL

GENERAL DESCRIPTION The AD57901 is a single, 20-bit, unbuffered voltage output digitalto-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5790 accepts a positive reference input in the range of 5 V to VDD − 2.5 V and a negative reference input in the range of VSS +

System Ready, 20-Bit, 짹2LSB INL

GENERAL DESCRIPTION The AD57901 is a single, 20-bit, unbuffered voltage output digitalto-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5790 accepts a positive reference input in the range of 5 V to VDD − 2.5 V and a negative reference input in the range of VSS +

Voltage Output DAC

文件：965.99 Kbytes Page：27 Pages

Voltage Output DAC

文件：965.99 Kbytes Page：27 Pages

Voltage Output DAC

文件：965.99 Kbytes Page：27 Pages

Single wire CAN transceiver

DESCRIPTION The AU5790 is a line transceiver, primarily intended for in-vehicle multiplex applications. The device provides an interface between a CAN data link controller and a single wire physical bus line. The achievable bus speed is primarily a function of the network time constant and bit

Single wire CAN transceiver

DESCRIPTION The AU5790 is a line transceiver, primarily intended for in-vehicle multiplex applications. The device provides an interface between a CAN data link controller and a single wire physical bus line. The achievable bus speed is primarily a function of the network time constant and bit

POWER ZENERS

DESCRIPTION Fused-in-glass, metallurgically-bonded 5 watt zeners. FEATURES • 2 Times Greater Surge Rating than Conventional 10 Watt Zeners • Small Physical Size

Horizontal Signal Processing ICs for CRT Display

文件：41.92 Kbytes Page：4 Pages

Pulsed Coupled Cavity TWT

文件：53.05 Kbytes Page：1 Pages