Ultra Stable, 16-Bit 짹0.5 LSB INL

GENERAL DESCRIPTION The AD57601 is a true 16-bit, unbuffered voltage output digital-to-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5760 accepts a positive reference input range of 5 V to VDD − 2.5 Vand a negative reference input range of VSS + 2.5 V to 0 V. The

System Ready, 20-Bit, 짹2LSB INL

GENERAL DESCRIPTION The AD57901 is a single, 20-bit, unbuffered voltage output digitalto-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5790 accepts a positive reference input in the range of 5 V to VDD − 2.5 V and a negative reference input in the range of VSS +

System Ready, 18-Bit 짹1 LSB INL

GENERAL DESCRIPTION The AD57801 is a true 18-bit, unbuffered voltage output digitalto-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5780 accepts a positive reference input range of 5 V to VDD − 2.5 V and a negative reference input range of VSS + 2.5 V to 0 V. Bot

可供系统立即使用的18-BIT、±1 LSB INL电压输出DAC

AD57801是一款真18位、无缓冲电压输出DAC，采用最高33 V的双极性电源供电。正基准电压输入范围为5 V至VDD – 2.5V，负基准电压输入范围为VSS + 2.5 V至0V。两路基准电压输入均在片内缓冲，无需外部缓冲。AD5780的相对精度最大值为±1 LSB，保证工作单调性，微分非线性（DNL）最大值为±1 LSB。 \n\n 这款器件采用多功能三线式串行接口，能够以最高35 MHz的时钟速率工作，并与标准SPI、QSPI™、MICROWIRE™、DSP接口兼容。它内置上电复位电路，确保DAC上电后输出至0 V并保持已知输出阻抗状态，直到对该器件执行一次有效的写操作为止 • 真18位电压输出DAC，±1 LSB INL \n\n• 输出噪声频谱密度：8 nV/√Hz\n\n• 线性误差长期稳定性：0.025 LSB\n\n• 增益误差温度系数：±0.018 ppm/°C\n\n• 输出电压建立时间：2.5 μs\n\n• 中间电平毛刺脉冲：3.5 nV-s;

Voltage Output DAC

文件：668.34 Kbytes Page：27 Pages

System Ready, 18-Bit 짹1 LSB INL

GENERAL DESCRIPTION The AD57801 is a true 18-bit, unbuffered voltage output digitalto-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5780 accepts a positive reference input range of 5 V to VDD − 2.5 V and a negative reference input range of VSS + 2.5 V to 0 V. Bot

System Ready, 18-Bit 짹1 LSB INL

GENERAL DESCRIPTION The AD57801 is a true 18-bit, unbuffered voltage output digitalto-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5780 accepts a positive reference input range of 5 V to VDD − 2.5 V and a negative reference input range of VSS + 2.5 V to 0 V. Bot

System Ready, 18-Bit 짹1 LSB INL

GENERAL DESCRIPTION The AD57801 is a true 18-bit, unbuffered voltage output digitalto-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5780 accepts a positive reference input range of 5 V to VDD − 2.5 V and a negative reference input range of VSS + 2.5 V to 0 V. Bot

System Ready, 18-Bit 짹1 LSB INL

GENERAL DESCRIPTION The AD57801 is a true 18-bit, unbuffered voltage output digitalto-analog converter (DAC) that operates from a bipolar supply of up to 33 V. The AD5780 accepts a positive reference input range of 5 V to VDD − 2.5 V and a negative reference input range of VSS + 2.5 V to 0 V. Bot

Voltage Output DAC

文件：668.34 Kbytes Page：27 Pages

Voltage Output DAC

文件：668.34 Kbytes Page：27 Pages

Voltage Output DAC

文件：668.34 Kbytes Page：27 Pages

Voltage Output DAC

文件：668.34 Kbytes Page：27 Pages

Voltage Output DAC

文件：668.34 Kbytes Page：27 Pages

SAE/J1850/VPW transceiver

DESCRIPTION The AU5780 is a line transceiver being primarily intended for in-vehicle multiplex applications. It provides interfacing between a link controller and the physical bus wire. The device supports the SAE/J1850 VPWM standard with a nominal bus speed of 10.4 kbps. FEATURES • Supports SA

10-Bit, 80 MSPS, High Speed, Low Power D/A Converter

Description The HI5780 is a 10-bit, 80 MSPS, high speed, low power CMOS D/A converter. The converter incorporates a 10-bit input data register with current outputs. The HI5780 includes a power down feature that reduces power consumption and a blanking control. The on-chip bandgap reference can be

10-Bit, 80 MSPS, High Speed, Low Power D/A Converter

Description The HI5780 is a 10-bit, 80 MSPS, high speed, low power CMOS D/A converter. The converter incorporates a 10-bit input data register with current outputs. The HI5780 includes a power down feature that reduces power consumption and a blanking control. The on-chip bandgap reference can be

10-Bit, 80 MSPS, High Speed, Low Power D/A Converter

Description The HI5780 is a 10-bit, 80 MSPS, high speed, low power CMOS D/A converter. The converter incorporates a 10-bit input data register with current outputs. The HI5780 includes a power down feature that reduces power consumption and a blanking control. The on-chip bandgap reference can be

POWER ZENERS

DESCRIPTION Fused-in-glass, metallurgically-bonded 5 watt zeners. FEATURES • 2 Times Greater Surge Rating than Conventional 10 Watt Zeners • Small Physical Size