Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface

GENERAL DESCRIPTION The AD5405 1 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter (DAC). This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4-quadr

8-Bit, High Speed, Multiplying D/A Converter (Universal Digital Logic Interface)

GENERAL DESCRIPTION The DAC08 series of 8-bit monolithic digital-to-analog convert ers provide very high-speed performance coupled with low cost and outstanding applications flexibility. FEATURES Fast Settling Output Current: 85 ns Full-Scale Current Prematched to ±1 LSB Dir

Dual-Current Output, Parallel Input, 16 /14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

Dual-Current Output, Parallel Input, 16-/14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface

GENERAL DESCRIPTION The AD5405 1 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter (DAC). This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4-quadr

双通道、12位、高带宽、乘法DAC，内置四象限电阻和并行接口

AD5405是一款CMOS、12位、双通道电流输出数模转换器(DAC)，采用2.5 V至5.5 V电源供电，适合电池供电及其它应用。    \n\n 这款器件采用CMOS亚微米工艺制造，能够提供出色的四象限乘法特性，大信号乘法带宽最高可达10 MHz。\n\n 满量程输出电流由所施加的外部基准输入电压 (VREF) 决定。与外部电流至电压精密放大器配合使用时，集成的反馈电阻(RFB) 可提供温度跟踪和满量程电压输出。此外，该器件内置双极性操作及其它配置模式所需的四象限电阻。\n\n 利用这款DAC的数据回读功能，用户可以通过DB引脚读取DAC寄存器的内容。上电时， • 乘法带宽：10 MHz\n\n• 片内四象限电阻提供灵活的输出范围\n\n• 积分非线性(INL)：±1 LSB\n\n• 40 引脚LFCSP封装\n\n• 2.5 V 至 5.5 V 电源供电\n\n• ±10 V 基准电压输入;

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface

GENERAL DESCRIPTION The AD5405 1 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter (DAC). This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4-quadr

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface

GENERAL DESCRIPTION The AD5405 1 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter (DAC). This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4-quadr

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface

GENERAL DESCRIPTION The AD5405 1 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter (DAC). This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4-quadr

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface

GENERAL DESCRIPTION The AD5405 1 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter (DAC). This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4-quadr

单通道、12位、串行输入、电流源DAC

AD5410/AD5420是可编程电流源输出的低成本、精密、完全集成的12/16位转换器，可满足工业过程控制应用的需求。输出电流范围可编程为4mA至20 mA、0mA至20mA或者0mA至24mA的超量程。输出具有开路保护功能，可以驱动1H的电感负载。该器件采用10.8 V至40V（AD5410/AD5420AREZ）或10.8V至60V（AD5410/AD5420ACPZ）范围的电源供电。输出回路为0 V至AVDD – 2.5 V。 灵活的串口为SPI和MICROWIRE兼容接口，可在三线制模式下工作，以将隔离应用中所需的数字隔离电路降至较少。该器件还包含一个确保器件在已知状态下上 • 12位分辨率和单调性\n\n• 电流输出范围：\n4至20mA、0至20mA或者0至24mA\n总不可调整误差（TUE）：0.1%\n输出漂移：3ppm/°C\n\n• 灵活的串行数字接口\n\n• 片上输出故障检测\n\n• 片上基准（最大值10 ppm/°C）\n\n• 异步清零功能\n\n• 电源 (AVDD) 范围\n10.8V 至 40V\n\n• 输出回路一致性：AVDD – 2.5 V\n\n• 温度范围：-40°C至+85°C\n\n• 24引脚TSSOP封装;

Single Channel, 16-Bit, Serial Input, Current Source DAC

GENERAL DESCRIPTION The AD5410/AD5420 are low cost, precision, fully integrated 12-/16-bit converters offering a programmable current source output designed to meet the requirements of industrial process control applications. The output current range is programmable at 4 mA to 20 mA, 0 mA to 20

Low Power HART Modem

GENERAL DESCRIPTION The AD5700/AD5700-1 are single-chip solutions, designed and specified to operate as a HART® FSK half-duplex modem, complying with the HART physical layer requirements. The AD5700/AD5700-1 integrateall of the necessary filtering, signal detection, modulating, demodulating and s

Low Power HART Modem

GENERAL DESCRIPTION The AD5700/AD5700-1 are single-chip solutions, designed and specified to operate as a HART® FSK half-duplex modem, complying with the HART physical layer requirements. The AD5700/AD5700-1 integrateall of the necessary filtering, signal detection, modulating, demodulating and s

Single Channel, 16-Bit, Serial Input, Current Source DAC

GENERAL DESCRIPTION The AD5410/AD5420 are low cost, precision, fully integrated 12-/16-bit converters offering a programmable current source output designed to meet the requirements of industrial process control applications. The output current range is programmable at 4 mA to 20 mA, 0 mA to 20

Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

单通道、12位、电流源和电压输出DAC，HART连接

AD5412/AD5422是低成本、精密、完全集成、12/16位数模转换器(DAC)，内置可编程电流源和可编程电压输出，设计用于满足工业过程控制应用的需要。 输出电流范围可编程设置为4 mA至20 mA、0 mA至20 mA或者超量程的0 mA至24 mA。\n\n 此产品的LFCSP版本有一个CAP2引脚，可以将HART信号耦合到AD5412/AD5422的电流输出上。\n\n 电压输出由一个独立引脚提供，该引脚可配置成提供0 V至5 V、0 V至10 V、±5 V或±10 V输出范围；所有范围均提供10%的超量程。\n\n 模拟输出有短路和开 • 12/16位分辨率和单调性 \n\n• 电流输出范围：4 mA至20 mA；0 mA至20 mA；0 mA至24 mA\n总非调整误差(TUE)：±0.01 %（典型值，FSR）\n输出漂移：±3 ppm/°C\n\n• 电压输出范围：0 V至5 V；0 V至10 V；±5 V；±10 V\n超量程：10%\n总非调整误差(TUE)：±0.01 %（典型值，FSR）\n输出漂移：±2 ppm/°C\n\n• 灵活的串行数字接口\n\n• 片内输出故障检测\n\n• 片上基准压源：10 ppm/°C（最大值） \n\n• 可选的稳压DVCC输出 \n\n• 异步清零功;

Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface

GENERAL DESCRIPTION The AD5429/AD5439/AD54491 are CMOS 8-, 10-, and 12-bit dual-channel current output digital-to-analog converters, respectively. These devices operate from a 2.5 V to 5.5 V power supply, making them suited to battery-powered and other applications. FEATURES 10 MHz mult

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Serial Interface

GENERAL DESCRIPTION The AD54151 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter. This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered applications and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4

Dual-Current Output, Parallel Input, 16 /14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

8-Bit, High Speed, Multiplying D/A Converter (Universal Digital Logic Interface)

GENERAL DESCRIPTION The DAC08 series of 8-bit monolithic digital-to-analog convert ers provide very high-speed performance coupled with low cost and outstanding applications flexibility. FEATURES Fast Settling Output Current: 85 ns Full-Scale Current Prematched to ±1 LSB Dir

Dual-Current Output, Parallel Input, 16-/14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface

GENERAL DESCRIPTION The AD5405 1 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter (DAC). This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4-quadr

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Serial Interface

GENERAL DESCRIPTION The AD54151 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter. This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered applications and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Serial Interface

GENERAL DESCRIPTION The AD54151 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter. This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered applications and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Serial Interface

GENERAL DESCRIPTION The AD54151 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter. This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered applications and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4

High Performance, BiFET Operational Amplifiers

PRODUCT DESCRIPTION The BiFET series of precision, monolithic FET-input op ampsare fabricated with the most advanced BiFET and laser trimming technologies. The AD542, AD544, AD547 series offers bias currents significantly lower than currently available BiFET devices, 25 pA max, warmed up.

Single Channel, 16-Bit, Serial Input, Current Source DAC

GENERAL DESCRIPTION The AD5410/AD5420 are low cost, precision, fully integrated 12-/16-bit converters offering a programmable current source output designed to meet the requirements of industrial process control applications. The output current range is programmable at 4 mA to 20 mA, 0 mA to 20

Low Power HART Modem

GENERAL DESCRIPTION The AD5700/AD5700-1 are single-chip solutions, designed and specified to operate as a HART® FSK half-duplex modem, complying with the HART physical layer requirements. The AD5700/AD5700-1 integrateall of the necessary filtering, signal detection, modulating, demodulating and s

Single Channel, 16-Bit, Serial Input, Current Source DAC

GENERAL DESCRIPTION The AD5410/AD5420 are low cost, precision, fully integrated 12-/16-bit converters offering a programmable current source output designed to meet the requirements of industrial process control applications. The output current range is programmable at 4 mA to 20 mA, 0 mA to 20

Single Channel, 16-Bit, Serial Input, Current Source DAC

GENERAL DESCRIPTION The AD5410/AD5420 are low cost, precision, fully integrated 12-/16-bit converters offering a programmable current source output designed to meet the requirements of industrial process control applications. The output current range is programmable at 4 mA to 20 mA, 0 mA to 20

Low Power HART Modem

GENERAL DESCRIPTION The AD5700/AD5700-1 are single-chip solutions, designed and specified to operate as a HART® FSK half-duplex modem, complying with the HART physical layer requirements. The AD5700/AD5700-1 integrateall of the necessary filtering, signal detection, modulating, demodulating and s

16-Bit, Serial Input, Loop-Powered, 4mA to 20mA DAC

GENERAL DESCRIPTION The AD5421 is a complete, loop-powered, 4 mA to 20 mA digital-to-analog converter (DAC) designed to meet the needs of smart transmitter manufacturers in the industrial control industry. The DAC provides a high precision, fully integrated, low cost solution in compact TSSOP and

16-Bit, Serial Input, Loop-Powered, 4mA to 20mA DAC

GENERAL DESCRIPTION The AD5421 is a complete, loop-powered, 4 mA to 20 mA digital-to-analog converter (DAC) designed to meet the needs of smart transmitter manufacturers in the industrial control industry. The DAC provides a high precision, fully integrated, low cost solution in compact TSSOP and

16-Bit, Serial Input, Loop-Powered, 4mA to 20mA DAC

GENERAL DESCRIPTION The AD5421 is a complete, loop-powered, 4 mA to 20 mA digital-to-analog converter (DAC) designed to meet the needs of smart transmitter manufacturers in the industrial control industry. The DAC provides a high precision, fully integrated, low cost solution in compact TSSOP and

Low Power HART Modem

GENERAL DESCRIPTION The AD5700/AD5700-1 are single-chip solutions, designed and specified to operate as a HART® FSK half-duplex modem, complying with the HART physical layer requirements. The AD5700/AD5700-1 integrateall of the necessary filtering, signal detection, modulating, demodulating and s

Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Single Channel, 16-Bit, Serial Input, Current Source DAC

GENERAL DESCRIPTION The AD5410/AD5420 are low cost, precision, fully integrated 12-/16-bit converters offering a programmable current source output designed to meet the requirements of industrial process control applications. The output current range is programmable at 4 mA to 20 mA, 0 mA to 20

Single Channel, 16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Single Channel, 16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Single Channel, 16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

Single Channel, 12/16-Bit, Serial Input, Current Source & Voltage Output DAC

GENERAL DESCRIPTION The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications. FEATURES 12-/16-b

8-/10-/12-Bit, High Bandwidth, Multiplying DACs with Parallel Interface

GENERAL DESCRIPTION The AD5424/AD5433/AD54451 are CMOS 8-, 10-, and 12-bit current output digital-to-analog converters (DACs), respectively. These devices operate from a 2.5 V to 5.5 V power supply, making them suitable for battery-powered applications and many other applications. These DACs util

Dual 8-,10-,12-Bit High Bandwidth Multiplying DACs with Serial Interface

GENERAL DESCRIPTION The AD5429/AD5439/AD54491 are CMOS 8-, 10-, and 12-bit dual-channel current output digital-to-analog converters, respectively. These devices operate from a 2.5 V to 5.5 V power supply, making them suited to battery-powered and other applications. FEATURES 10 MHz mult

Dual-Current Output, Parallel Input, 16-/14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

Dual 12-Bit, High Bandwidth, Multiplying DAC with 4-Quadrant Resistors and Parallel Interface

GENERAL DESCRIPTION The AD5405 1 is a CMOS, 12-bit, dual-channel, current output digital-to-analog converter (DAC). This device operates from a 2.5 V to 5.5 V power supply, making it suited to battery-powered and other applications. FEATURES 10 MHz multiplying bandwidth On-chip 4-quadr

Dual-Current Output, Parallel Input, 16 /14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

8-Bit, High Speed, Multiplying D/A Converter (Universal Digital Logic Interface)

GENERAL DESCRIPTION The DAC08 series of 8-bit monolithic digital-to-analog convert ers provide very high-speed performance coupled with low cost and outstanding applications flexibility. FEATURES Fast Settling Output Current: 85 ns Full-Scale Current Prematched to ±1 LSB Dir

Quad 3-State Noninverting Buffers High-Performance Silicon-Gate CMOS

[ADI] GENERAL DESCRIPTION The AD5424/AD5433/AD5445 are CMOS 8, 10 and 12-bit current output digital-to-analog converters (DACs) respectively. These devices operate from a +2.5 V to 5.5 V power supply, making them suited to battery powered applications and many other applications. These DACs ut

8-Bit, High Bandwidth Multiplying DAC with Serial Interface

GENERAL DESCRIPTION The AD54251 is a CMOS, 8-bit, current output digital-to-analog converter (DAC) that operates from a 2.5 V to 5.5 V power supply, making it suitable for battery-powered applications and many other applications. FEATURES 2.5 V to 5.5 V supply operation 50 MHz serial int

8-Bit, High Speed, Multiplying D/A Converter (Universal Digital Logic Interface)

GENERAL DESCRIPTION The DAC08 series of 8-bit monolithic digital-to-analog convert ers provide very high-speed performance coupled with low cost and outstanding applications flexibility. FEATURES Fast Settling Output Current: 85 ns Full-Scale Current Prematched to ±1 LSB Dir

Dual-Current Output, Parallel Input, 16 /14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.

Dual-Current Output, Parallel Input, 16-/14-Bit Multiplying DACs with 4-Quadrant Resistors

GENERAL DESCRIPTION The AD5547/AD5557 are dual precision, 16-/14-bit, multiplying, low power, current-output, parallel input, digital-to-analog converters (DACs). They are designed to operate from single +5 V supply with ±10 V multiplying references for 4-quadrant outputs with 6.8 MHz bandwidth.