Real-Time Analog Computational Unit ACU

GENERAL DESCRIPTION The AD538 is a monolithic real-time computational circuit that provides precision analog multiplication, division, and exponentiation. The combination of low input and output offset voltages and excellent linearity results in accurate computation over an unusually wide input d

Real-Time Analog Computational Unit (ACU)

GENERAL DESCRIPTION The AD538 is a monolithic real-time computational circuit that provides precision analog multiplication, division, and exponentiation. The combination of low input and output offset voltages and excellent linearity results in accurate computation over an unusually wide input d

Real-Time Analog Computational Unit (ACU)

FEATURES VO = VY(VZ/VX)m transfer function Wide dynamic range (denominator) −1000:1 Simultaneous multiplication and division Resistor-programmable powers and roots No external trims required Low input offsets

实时模拟计算单元(ACU)

AD538是一款单芯片实时计算电路，提供精密模拟乘法、除法和指数运算功能。它具有低输入和输出失调电压及出色的线性度，可以在非常宽的输入动态范围内执行精确运算。激光晶圆调整使得乘法和除法误差低至读数的0.25%，而100 mV或更低的典型输出失调电压则提高了成品器件的整体性能。此外，400 kHz带宽进一步增强了实时模拟信号处理性能。\n\n AD538的总传递函数为Vo=Vy(Vz/Vx)m。特定函数的编程通过引脚绑定进行。一象限（正输入）乘法和除法无需外部元件，而二象限（双极性分子）除法需要使用外部电平转换和调整电阻。乘法和除法运算所需的比例因子可以通过片内+2 V或+10 • 传递函数：VOUT = VY (VZ / VX)m \n\n• 宽动态范围（分母）：1000:1\n\n• 同时执行乘法和除法运算\n\n• 可通过电阻编程的幂和根;

Real-Time Analog Computational Unit (ACU)

FEATURES VO = VY(VZ/VX)m transfer function Wide dynamic range (denominator) −1000:1 Simultaneous multiplication and division Resistor-programmable powers and roots No external trims required Low input offsets

40-Channel, 3V/5V Single Supply, 14-Bit, Voltage-Output DAC

GENERAL DESCRIPTION The AD5380 is a complete, single-supply, 40-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The AD5380 includes a programmable internal 1.25 V/2.5 V, 10 ppm/°C reference, an on-chip c

40通道、14位、3 V/5 V单电源、电压输出DAC

AD5380是一款完整的单电源、40通道、14位DAC，提供100引脚LQFP封装。所有40个通道均具有一个以轨到轨方式工作的片内输出放大器。该器件内置一个可编程的1.25 V/2.5 V、10 ppm/°C基准电压源；片内通道监控功能可将模拟输出多路复用至一个共用MON_OUT引脚，以便进行外部监控；输出放大器升压模式则可以优化放大器压摆率。AD5380含有一个WR脉冲宽度为20 ns的双缓冲并行接口、一个接口速度超过30 MHz的SPI/QSPI/MICROWIRE/DSP兼容型串行接口和一个支持400 kHz数据传输速率的 I2C兼容型接口。\n输入寄存器与后置的DAC寄存器可提供双缓冲 提供中文数据手册\n保证单调性\n积分非线性(INL)误差：最大值±4 LSB \n1.25 V/2.5 V片内基准电压源\n温度系数参考：10 ppm/ºC\n温度范围：-40℃至+85℃\n轨到轨输出放大器\n关断模式\n鲁棒的HBM（额定值为6.5 kV）和FICDM ESD（额定值为2 kV）性能 \n用户接口：并行\n串行（SPI®/QSPI™/MICROWIRE™/DSP兼容型接口，提供数据回读）\nI2C®兼容 \n集成功能通道监控\n通过LDAC同时更新输出 \n清零至用户可编程代码功能 \n放大器升压模式可优化压摆率 \n用户可编程的失调和增益调整 \nToggle模式支持方;

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

40-Channel, 3V/5V Single Supply, 14-Bit, Voltage-Output DAC

GENERAL DESCRIPTION The AD5380 is a complete, single-supply, 40-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The AD5380 includes a programmable internal 1.25 V/2.5 V, 10 ppm/°C reference, an on-chip c

32-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage Output DAC

GENERAL DESCRIPTION The AD5378 contains 32 14-bit DACs in one CSPBGA package. The AD5378 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V,

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

40-Channel, 3V/5V Single Supply, 14-Bit, Voltage-Output DAC

GENERAL DESCRIPTION The AD5380 is a complete, single-supply, 40-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The AD5380 includes a programmable internal 1.25 V/2.5 V, 10 ppm/°C reference, an on-chip c

32-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage Output DAC

GENERAL DESCRIPTION The AD5378 contains 32 14-bit DACs in one CSPBGA package. The AD5378 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V,

40-Channel, 3 V/5 V, Single-Supply 12-Bit, denseDAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

40-Channel, 3 V/5 V, Single-Supply 12-Bit, denseDAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

40-Channel, 3V/5V Single Supply, 14-Bit, Voltage-Output DAC

GENERAL DESCRIPTION The AD5380 is a complete, single-supply, 40-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The AD5380 includes a programmable internal 1.25 V/2.5 V, 10 ppm/°C reference, an on-chip c

40-Channel, 3 V/5 V, Single-Supply, 12-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

40-Channel, 3 V/5 V, Single-Supply 12-Bit, denseDAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

40通道、3 V/5 V单电源、12位电压输出DAC

AD5381是一款完整的单电源、40通道、12位DAC，提供100引脚LQFP封装。所有40个通道均具有一个以轨到轨方式工作的片内输出放大器。该器件内置一个可编程的1.25 V/2.5 V、10 ppm/°C基准电压源。片内通道监控功能可将模拟输出多路复用至一个共用MON_OUT引脚，以便进行外部监控，输出放大器升压模式则可以优化放大器压摆率。AD5381含有一个WR脉宽为20 ns 的双缓冲并行接口、一个接口速度超过30 MHz的SPI/QSPI/MICROWIRE/DSP兼容型串行接口和一个支持400 kHz数据传输速率的 I2C兼容型接口。\n\n 输入寄存器后置DAC寄存器就 • 保证单调性\n\n• 积分非线性(INL)误差：最大值±1 LSB \n\n• 1.25 V/2.5 V片内基准电压源\n温度系数：10 ppm/ºC\n\n• 温度范围：-40℃至+85℃ \n\n• 轨到轨输出放大器 \n\n• 关断 \n\n• 封装类型：100引脚LQFP封装(14 mm × 14 mm) \n\n• 用户接口：并行\n串行（SPI®/QSPI™/MICROWIRE™/DSP兼容型接口，提供数据回读）\n\n• I2C®兼容\n\n• 鲁棒的HBM（额定值为6.5 kV）和FICDM ESD（额定值为2 kV）性能 \n\n\nINTEGRATED FUNCTION;

32-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage Output DAC

GENERAL DESCRIPTION The AD5378 contains 32 14-bit DACs in one CSPBGA package. The AD5378 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V,

40-Channel, 3 V/5 V, Single-Supply, 12-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

40-Channel, 3 V/5 V, Single-Supply, 12-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

32-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage Output DAC

GENERAL DESCRIPTION The AD5378 contains 32 14-bit DACs in one CSPBGA package. The AD5378 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V,

40-Channel, 3 V/5 V, Single-Supply, 12-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

40-Channel, 3 V/5 V, Single-Supply, 12-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

40-Channel, 3 V/5 V, Single-Supply 12-Bit, denseDAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

32-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage Output DAC

GENERAL DESCRIPTION The AD5378 contains 32 14-bit DACs in one CSPBGA package. The AD5378 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V,

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

32-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage Output DAC

GENERAL DESCRIPTION The AD5378 contains 32 14-bit DACs in one CSPBGA package. The AD5378 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V,

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

40-Channel, 3 V/5 V, Single-Supply 12-Bit, denseDAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

40-Channel, 3 V/5 V, Single-Supply 12-Bit, denseDAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

32-Channel, 3 V/5 V, Single-Supply, 12-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5383 is a complete, single-supply, 32-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5383 includes a programmable internal 1.25 V/2.5 V, 10 ppm/°C reference; an on-chip c

32-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage Output DAC

GENERAL DESCRIPTION The AD5378 contains 32 14-bit DACs in one CSPBGA package. The AD5378 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V,

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

32-Channel, 3 V/5 V, Single-Supply, 12-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5383 is a complete, single-supply, 32-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5383 includes a programmable internal 1.25 V/2.5 V, 10 ppm/°C reference; an on-chip c

32-Channel, 3 V/5 V, Single-Supply, 12-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5383 is a complete, single-supply, 32-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5383 includes a programmable internal 1.25 V/2.5 V, 10 ppm/°C reference; an on-chip c

32-Channel, 3 V/5 V, Single-Supply, 12-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5383 is a complete, single-supply, 32-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5383 includes a programmable internal 1.25 V/2.5 V, 10 ppm/°C reference; an on-chip c

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

32-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage Output DAC

GENERAL DESCRIPTION The AD5378 contains 32 14-bit DACs in one CSPBGA package. The AD5378 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V,

32-Channel, 3 V/5 V, Single-Supply, 12-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5383 is a complete, single-supply, 32-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5383 includes a programmable internal 1.25 V/2.5 V, 10 ppm/°C reference; an on-chip c

40-Channel, 3 V/5 V, Single-Supply 12-Bit, denseDAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

40-Channel, 3 V/5 V, Single-Supply 12-Bit, denseDAC

GENERAL DESCRIPTION The AD5381 is a complete, single-supply, 40-channel, 12-bit denseDAC® available in a 100-lead LQFP package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. FEATURES Guaranteed monotonic INL error: ±1 LSB max On-chip 1.25 V/2.5 V, 10 p

40-Channel, 3 V/5 V, Single-Supply, Serial, 14-Bit Voltage Output DAC

GENERAL DESCRIPTION The AD5384 is a complete single-supply, 40-channel, 14-bit digital-to-analog converter (DAC) available in a 100-ball CSP_BGA package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The AD5384 includes an internal 1.25 V/2.5 V, 10 ppm/°C reference

40-Channel, 3 V/5 V, Single-Supply, Serial, 14-Bit Voltage Output DAC

GENERAL DESCRIPTION The AD5384 is a complete single-supply, 40-channel, 14-bit digital-to-analog converter (DAC) available in a 100-ball CSP_BGA package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The AD5384 includes an internal 1.25 V/2.5 V, 10 ppm/°C reference

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

32-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage Output DAC

GENERAL DESCRIPTION The AD5378 contains 32 14-bit DACs in one CSPBGA package. The AD5378 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V,

40-Channel, 3 V/5 V, Single-Supply, Serial, 14-Bit Voltage Output DAC

GENERAL DESCRIPTION The AD5384 is a complete single-supply, 40-channel, 14-bit digital-to-analog converter (DAC) available in a 100-ball CSP_BGA package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The AD5384 includes an internal 1.25 V/2.5 V, 10 ppm/°C reference

40-Channel, 3 V/5 V, Single-Supply, Serial, 14-Bit Voltage Output DAC

GENERAL DESCRIPTION The AD5384 is a complete single-supply, 40-channel, 14-bit digital-to-analog converter (DAC) available in a 100-ball CSP_BGA package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The AD5384 includes an internal 1.25 V/2.5 V, 10 ppm/°C reference

32-Channel, 14-Bit, Parallel and Serial Input, Bipolar Voltage Output DAC

GENERAL DESCRIPTION The AD5378 contains 32 14-bit DACs in one CSPBGA package. The AD5378 provides a bipolar output range determined by the voltages applied to the VREF(+) and VREF(−) inputs. The maximum output voltage span is 17.5 V, corresponding to a bipolar output range of −8.75 V to +8.75 V,

32-Channel, 3 V/5 V, Single-Supply, 14-Bit, Voltage Output DAC

GENERAL DESCRIPTION The AD5382 is a complete, single-supply, 32-channel, 14-bit denseDAC® available in a 100-lead LQFP package. All 32 channels have an on-chip output amplifier with rail-to-rail operation. The AD5382 includes an internal software-selectable 1.25 V/2.5 V, 10 ppm/°C reference, an o

40-Channel, 3 V/5 V, Single-Supply, Serial, 14-Bit Voltage Output DAC

GENERAL DESCRIPTION The AD5384 is a complete single-supply, 40-channel, 14-bit digital-to-analog converter (DAC) available in a 100-ball CSP_BGA package. All 40 channels have an on-chip output amplifier with rail-to-rail operation. The AD5384 includes an internal 1.25 V/2.5 V, 10 ppm/°C reference

Real-Time Analog Computational Unit ACU

GENERAL DESCRIPTION The AD538 is a monolithic real-time computational circuit that provides precision analog multiplication, division, and exponentiation. The combination of low input and output offset voltages and excellent linearity results in accurate computation over an unusually wide input d

Real-Time Analog Computational Unit (ACU)

GENERAL DESCRIPTION The AD538 is a monolithic real-time computational circuit that provides precision analog multiplication, division, and exponentiation. The combination of low input and output offset voltages and excellent linearity results in accurate computation over an unusually wide input d

Real-Time Analog Computational Unit (ACU)

FEATURES VO = VY(VZ/VX)m transfer function Wide dynamic range (denominator) −1000:1 Simultaneous multiplication and division Resistor-programmable powers and roots No external trims required Low input offsets