Radiation Hardened Octal Three-State Buffer/Line Driver

Description The Intersil ACTS541MS is a Radiation Hardened Octal Buffer/Line Driver, with three-state outputs. The output enable pins OE1, OE2 control the three-state outputs. If either enable is high the output will be in a high impedance state. For data output both enables must be low. The ACT

Radiation Hardened Octal Three-State Buffer/Line Driver

Intersil’s Satellite Applications FlowTM (SAF) devices are fully tested and guaranteed to 100kRAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of

HIGH POWER OP-AMP

DESCRIPTION: The MSK 541 Series is a high power monolithic amplifier ideally suited for high power amplification and magnetic deflection applications. This amplifier is capable of operation at a supply voltage rating of 80 volts and can deliver guaranteed continuous output currents up to 5A, maki

Pentium 4 Processors Supporting Hyper-Threading Technology

Introduction The Intel® Pentium® 4 processor on 90 nm process in the 775-land package is a follow on to the Pentium 4 processor in the 478-pin package with enhancements to the Intel NetBurst® microarchitecture. The Pentium 4 processor on 90 nm process in the 775-land package uses FlipChip Land Gr

TREK 541A

APPLICATIONS  Semiconductor  LCD  Electronic assembly  ESD-sensitive processes

Ultra Low Jitter Dual Any-Frequency XO (125 fs), 0.2 to 1500 MHz

KEY FEATURES • Available with any two selectable frequencies from 0.2 MHz to 1500 MHz • Very low jitter: 125 fs Typ RMS (12 kHz – 20 MHz) • Excellent PSNR and supply noise immunity: –80 dBc Typ • 7 ppm stability option (-40 to 85 C) • 3.3 V, 2.5 V and 1.8 V VDD supply operation from the s

Capacity (20-hour) 150Ah

文件：357.08 Kbytes Page：1 Pages