Receiver and Transmitter Interface

ACE9020 is a VHF oscillator, up-converter and prescaler. It is used in an offset modulated transmit architecture where a UHF synthesiser makes the channel selection and a second synthesiser generates a fixed transmit offset. A VCO signal drives a buffer in ACE9020 to feed an on chip prescaler and

Receiver and Transmitter Interface

ACE9020 is a VHF oscillator, up-converter and prescaler. It is used in an offset modulated transmit architecture where a UHF synthesiser makes the channel selection and a second synthesiser generates a fixed transmit offset. A VCO signal drives a buffer in ACE9020 to feed an on chip prescaler and

Radio Interface and Twin Synthesiser

ACE9030 is a combined radio interface circuit and twin synthesiser, intended for use in a cellular telephone. The radio interface section contains circuits to monitor and control levels such as transmit power in the telephone, circuits to demodulate the frequency modulated signal to audio, and a

Receiver and Transmitter Interface

Receiver and Transmitter Interface

ACE9020 is a VHF oscillator, up-converter and prescaler. It is used in an offset modulated transmit architecture where a UHF synthesiser makes the channel selection and a second synthesiser generates a fixed transmit offset. A VCO signal drives a buffer in ACE9020 to feed an on chip prescaler and

Receiver and Transmitter Interface

ACE9020 is a VHF oscillator, up-converter and prescaler. It is used in an offset modulated transmit architecture where a UHF synthesiser makes the channel selection and a second synthesiser generates a fixed transmit offset. A VCO signal drives a buffer in ACE9020 to feed an on chip prescaler and

Receiver and Transmitter Interface

ACE9020 is a VHF oscillator, up-converter and prescaler. It is used in an offset modulated transmit architecture where a UHF synthesiser makes the channel selection and a second synthesiser generates a fixed transmit offset. A VCO signal drives a buffer in ACE9020 to feed an on chip prescaler and

Receiver and Transmitter Interface

ACE9020 is a VHF oscillator, up-converter and prescaler. It is used in an offset modulated transmit architecture where a UHF synthesiser makes the channel selection and a second synthesiser generates a fixed transmit offset. A VCO signal drives a buffer in ACE9020 to feed an on chip prescaler and

3.6-5.0V; receiver and transmitter interface. For AMPS and TACS cellular telephone, 2-way radio systems

INSULATED PC SPACERS/SUPPORTS

INSULATED PC SPACERS / SUPPORTS • Board will be electrically insulated, eliminates need for insulating washers • Easy snap-in assembly • No tool required for installation • Designed for .062(1.57) thick boards • One piece design eliminates the need for additional screws and nuts • Slim desig

Snap Rivets

文件：152.09 Kbytes Page：2 Pages

IGBT Basic II

文件：389.5 Kbytes Page：25 Pages

Snap Rivets

文件：152.09 Kbytes Page：2 Pages