蓝牙音箱

CPU and Flexible IO\n32bit High performance CPU with DSPinstruction;\nProgram memory: internal 4M bit flash;\nFlexible GPIO pins with Programmable pull-up and pull-down resistors;\nSupport GPIO wakeup or interrupt;\n\nBluetooth Radio\nCompliant to Bluetooth 5.0 and BLE specification (QDID: 115952);\;

2.5 V to 5.5 V, 115 uA, Parallel Interface Single Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5330/AD5331/AD5340/AD53411 are single 8-/10-/12- bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 115 μA at 3 V and feature a power-down mode that further reduces the current to 80 nA. The devices incorporate an on-chip output buffer that can drive the

2.5 V to 5.5 V, 230uA, Parallel Interface Dual Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5332/AD5333/AD5342/AD5343 are dual 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 230 µA at 3 V, and feature a power-down pin, PD that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can dr

2.5 V to 5.5 V, 500 uA, Parallel Interface Quad Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5334/AD5335/AD5336/AD5344 are quad 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 500 µA at 3 V, and feature a power-down mode that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can drive

Product Brief 2.5MHz 4-, 8-, 10- & 12-Channel Rail-to-Rail Buffers

General Description The EL5127C, EL5227C, EL5327C, and EL5427C are low power, high voltage rail-to-rail input/output buffers designed for use in refer ence voltage buffering applications in small LCD displays. They are available in quad (EL5127C), octal (EL5227C), 10-channel (EL5327C), and 12-c

Silicon Bridge Rectifier, Single-Phase, 25 Amp

Features: ● Superior Thermal Design ● Surge Overload Rating: 400A (Peak) ● Hole Through for #8 Screw ● Silverplated Copper Leads