12+1 CHANNEL BUFFER FOR TFT LCD

\n \n\tConsisted of 12+1 channel buffers, the AAT7202 is designed to increase the driving capability for the needs of the thin film transistor liquid crystal display (TFT LCD). This device includes a VCOM buffer circuits, four rail to rail buffer amplifiers circuits, and 10 buffer • 12 Channels with Output Current: ±30mA (MAX)\n• 1 VCOM with Output Current: ±100mA (MAX)\n• Unity Gain Buffer Capable of Driving Large Capacitive Loads\n• Input Range Match to LCD Reference Requirements \n• Specified for –20°C to +85°C, 6.5V to 16V\n• TQFP-48 7 x 7 Package;

121-Channel Buffer for TFT LCD

文件：349.36 Kbytes Page：9 Pages

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

256 x 9, 512 x 9, 1K x 9 CMOS FIFO

Descriptions The MS7200L/7201AL/7202AL are dual-port static RAM based CMOS First-In/First-Out (FIFO) memories organized in nine-bit wide words. The devices are configured so that data is read out in the same sequential order that it was written in. Additional expansion logic is provided to allow