Slew Rate Controlled Load Switch

Features • 1.8V to 5.5V Input Voltage Range • 120mW (5V) Typical RDS(ON) • Low Quiescent Current: ▪ Typical 2μA ▪ Typical 0.1μA with Enable Off • Only 2.0V Needed for ON/OFF Control • Temperature Range: -40°C to +85°C • 5kV ESD Rating • SOT23-5 or SC70JW-8 Package

Slew Rate Controlled Load Switch

General Description The AAT4250 SmartSwitch is a member of AnalogicTech’s Application Specific Power MOSFET™ (ASPM™) product family. It is a slew rate controlled P-channel MOSFET power switch designed for high-side load switching applications. This switch operates with an input voltage range from

Slew Rate Controlled Load Switch

文件：189.58 Kbytes Page：13 Pages

Slew Rate Controlled Load Switch

文件：189.58 Kbytes Page：13 Pages

Slew Rate Controlled Load Switch

丝印代码：ACXYY；Slew Rate Controlled Load Switch

Features • 1.8V to 5.5V Input Voltage Range • 120mW (5V) Typical RDS(ON) • Low Quiescent Current: ▪ Typical 2μA ▪ Typical 0.1μA with Enable Off • Only 2.0V Needed for ON/OFF Control • Temperature Range: -40°C to +85°C • 5kV ESD Rating • SOT23-5 or SC70JW-8 Package

Slew Rate Controlled Load Switch

General Description The AAT4250 SmartSwitch is a member of AnalogicTech’s Application Specific Power MOSFET™ (ASPM™) product family. It is a slew rate controlled P-channel MOSFET power switch designed for high-side load switching applications. This switch operates with an input voltage range from

丝印代码：ACXYY；Slew Rate Controlled Load Switch

Features • 1.8V to 5.5V Input Voltage Range • 120mW (5V) Typical RDS(ON) • Low Quiescent Current: ▪ Typical 2μA ▪ Typical 0.1μA with Enable Off • Only 2.0V Needed for ON/OFF Control • Temperature Range: -40°C to +85°C • 5kV ESD Rating • SOT23-5 or SC70JW-8 Package

Slew Rate Controlled Load Switch

General Description The AAT4250 SmartSwitch is a member of AnalogicTech’s Application Specific Power MOSFET™ (ASPM™) product family. It is a slew rate controlled P-channel MOSFET power switch designed for high-side load switching applications. This switch operates with an input voltage range from

Slew Rate Controlled Load Switch

文件：189.58 Kbytes Page：13 Pages

Slew Rate Controlled Load Switch

文件：189.58 Kbytes Page：13 Pages

Slew Rate Controlled Load Switch

文件：189.58 Kbytes Page：13 Pages

Slew Rate Controlled Load Switch

文件：189.58 Kbytes Page：13 Pages

Slew Rate Controlled Load Switch

文件：189.58 Kbytes Page：13 Pages

Transistor

Transistor PNP Silicon

INTEGRATED PRESSURE SENSOR 20 to 250 kPa (2.9 to 36.3 psi) 0.2 to 4.9 V OUTPUT

The Motorola MPX4250 series Manifold Absolute Pressure (MAP) sensor for turbo boost engine control is designed to sense absolute air pressure within the intake manifold. This measurement can be used to compute the amount of fuel required for each cylinder. Features • 1.5 Maximum Error Over

INTEGRATED PRESSURE SENSOR 20 to 250 kPa (2.9 to 36.3 psi) 0.2 to 4.9 V OUTPUT

The Motorola MPX4250 series Manifold Absolute Pressure (MAP) sensor for turbo boost engine control is designed to sense absolute air pressure within the intake manifold. This measurement can be used to compute the amount of fuel required for each cylinder. Features • 1.5 Maximum Error Over

OPERATING OVERVIEW INTEGRATED PRESSURE SENSOR 0 to 250 kPa (0 to 36.3 psi) 0.2 to 4.91 Volts Output

Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated The MPX4250D series piezoresistive transducer is a state–of–the–art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontrolle

OPERATING OVERVIEW INTEGRATED PRESSURE SENSOR 0 to 250 kPa (0 to 36.3 psi) 0.2 to 4.91 Volts Output

Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated The MPX4250D series piezoresistive transducer is a state–of–the–art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontrolle