800mA Voltage-Scaling Step-Down Converter

General Description The AAT1142 SwitchReg is a dynamically programmable 2.2MHz step-down converter with an input voltage range of 2.7V to 5.5V and output from 0.6V to 2.0V. Its low supply current, high level of integration, and small footprint make the AAT1142 the ideal choice for microprocessor

800mA Voltage-Scaling Step-Down Converter

Features • VIN Range: 2.7V to 5.5V • VOUT Programmable Range: 0.6V to 2.0V • Dynamic Voltage Management: ▪ 50mV Output Resolution ▪ Fast, Stable Response • Serial Control Options: ▪ I2C Two-Wire Interface ▪ S2Cwire Single-Wire Interface • 800mA Output Current • Up to 93 Efficiency • Lin

800mA Voltage-Scaling Step-Down DC/DC Converter

800mA Voltage-Scaling Step-Down Converter

Features • VIN Range: 2.7V to 5.5V • VOUT Programmable Range: 0.6V to 2.0V • Dynamic Voltage Management: ▪ 50mV Output Resolution ▪ Fast, Stable Response • Serial Control Options: ▪ I2C Two-Wire Interface ▪ S2Cwire Single-Wire Interface • 800mA Output Current • Up to 93 Efficiency • Lin

800mA Voltage-Scaling Step-Down Converter

General Description The AAT1142 SwitchReg is a dynamically programmable 2.2MHz step-down converter with an input voltage range of 2.7V to 5.5V and output from 0.6V to 2.0V. Its low supply current, high level of integration, and small footprint make the AAT1142 the ideal choice for microprocessor

800mA Voltage-Scaling Step-Down Converter

General Description The AAT1142 SwitchReg is a dynamically programmable 2.2MHz step-down converter with an input voltage range of 2.7V to 5.5V and output from 0.6V to 2.0V. Its low supply current, high level of integration, and small footprint make the AAT1142 the ideal choice for microprocessor

1142 Differential Pressure Gauge

FEATURES Glass filled nylon case Static pressure capabilty 1,500 psi Ranges from 1 psid to 60 psid Superior magnets for smoother pointer motion Buna-N diaphragm & O-rings (others available) Small convoluted diahragm actuator

Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches

Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Factory programmed at end-of-line for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board vo

Sensitive Two-Wire Chopper-Stabilized Unipolar Hall-Effect Switches

FEATURES AND BENEFITS ■Chopper stabilization • Low switchpoint drift over operating temperature range • Low stress sensitivity ■Factory programmed at end-of-line for optimized switchpoints ■On-chip protection • Supply transient protection • Reverse-battery protection • On-board voltage re

36 way Centronics Cables

文件：89.97 Kbytes Page：1 Pages

Low-Profile Oscilloscopes

文件：4.30336 Mbytes Page：17 Pages