2횞75??DRIVER IC WITH 3 INTERNAL CIRCUITS

■ DESCRIPTION The UTC A7623 is a 75Ω driver-IC. It is a follower for video signals. It can be directly coupled to the previous stage because there is no internal bias at the input pin. When output is short to earth the IC enters power-save mode. ■ FEATURES * Triple channels. * Can be

2×75Ω DRIVER IC WITH 3 INTERNAL CIRCUITS

The UTC A7623 is a 75Ω driver-IC. It is a follower for video signals. It can be directly coupled to the previous stagebecause there is no internal bias at the input pin.\nWhen output is short to earth the IC enters power-save mode. • Triple channels. \n• Can be directly coupled to the previous circuit. \n• Each output can drive two loads (75Ω×2). \n• Output short circuit protection.;

2횞75??DRIVER IC WITH 3 INTERNAL CIRCUITS

■ DESCRIPTION The UTC A7623 is a 75Ω driver-IC. It is a follower for video signals. It can be directly coupled to the previous stage because there is no internal bias at the input pin. When output is short to earth the IC enters power-save mode. ■ FEATURES * Triple channels. * Can be

2횞75??DRIVER IC WITH 3 INTERNAL CIRCUITS

■ DESCRIPTION The UTC A7623 is a 75Ω driver-IC. It is a follower for video signals. It can be directly coupled to the previous stage because there is no internal bias at the input pin. When output is short to earth the IC enters power-save mode. ■ FEATURES * Triple channels. * Can be

2횞75??DRIVER IC WITH 3 INTERNAL CIRCUITS

■ DESCRIPTION The UTC A7623 is a 75Ω driver-IC. It is a follower for video signals. It can be directly coupled to the previous stage because there is no internal bias at the input pin. When output is short to earth the IC enters power-save mode. ■ FEATURES * Triple channels. * Can be

2횞75??DRIVER IC WITH 3 INTERNAL CIRCUITS

■ DESCRIPTION The UTC A7623 is a 75Ω driver-IC. It is a follower for video signals. It can be directly coupled to the previous stage because there is no internal bias at the input pin. When output is short to earth the IC enters power-save mode. ■ FEATURES * Triple channels. * Can be

DRIVER IC WITH 3 INTERNAL CIRCUITS

文件：130.94 Kbytes Page：6 Pages

DRIVER IC WITH 3 INTERNAL CIRCUITS

文件：130.94 Kbytes Page：6 Pages

DRIVER IC WITH 3 INTERNAL CIRCUITS

文件：130.94 Kbytes Page：6 Pages

DRIVER IC WITH 3 INTERNAL CIRCUITS

文件：130.94 Kbytes Page：6 Pages

DRIVER IC WITH 3 INTERNAL CIRCUITS

文件：130.94 Kbytes Page：6 Pages

14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC

GENERAL DESCRIPTION The AD7952 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc.’s iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial

75??driver IC with 3 internal circuits

Description The BA7622F and BA7623F are video driver ICs with three built-in circuits, developed for video equipment. The three circuits in the BA7622F, two sync-tip clamp inputs and one bias input, are terminated by internal resistances of 20 kΩ . The BA7623F output pins cab be connected directl

75??driver IC with 3 internal circuits

Description The BA7622F and BA7623F are video driver ICs with three built-in circuits, developed for video equipment. The three circuits in the BA7622F, two sync-tip clamp inputs and one bias input, are terminated by internal resistances of 20 kΩ . The BA7623F output pins cab be connected directl

SURFACE MOUNT LOW DROPOUT POSITIVE ADJUSTABLE REGULATORS

DESCRIPTION These three terminal positive adjustable voltage regulators in surface mount package are designed to provide 7.5A, 5A, 3A, and 1.5A with higher efficiency than conventional voltage regulators. The devices are designed to operate to 1 Volt input to output differential and the dropout v

3-WIRE AND I2C BUS SYSTEM, 2.3 GHz DIRECT TWO MODULUS-TYPE FREQUENCY SYNTHESIZER FOR CATV

3-WIRE AND I2C BUS SYSTEM, 2.3 GHz DIRECT TWO MODULUS-TYPE FREQUENCY SYNTHESIZER FOR CATV The TD7623AFN can be combined with a micro CPU to create a highly functional frequency synthesizer. The control data conforms to 3-wire bus and standard I2C bus formats. BUS-SW can be used to easily switch f