描述：ADAPTER PROGRAMMER 28-TSOP 开发板，套件，编程器 可编程适配器，插座

丝印代码：A626DC；3A,4.5V-16V Input,500kHz Synchronous Step-Down Converter

文件：949.21 Kbytes Page：9 Pages

High Brightness LED Current Regulator

Features and Benefits ▪ Automotive grade ▪ LED drive current up to 350 mA ▪ 6 to 40 V supply ▪ Reverse battery protection ▪ Low drop-out voltage ▪ LED short circuit and thermal protection ▪ 10 μA maximum shutdown current ▪ PWM dimming control input ▪ Current slew rate limiting

High Brightness LED Current Regulator

Features and Benefits ▪ Automotive grade ▪ LED drive current up to 350 mA ▪ 6 to 40 V supply ▪ Reverse battery protection ▪ Low drop-out voltage ▪ LED short circuit and thermal protection ▪ 10 μA maximum shutdown current ▪ PWM dimming control input ▪ Current slew rate limiting

保护型 LED 阵列驱动器

全新的 A6261 是一款线性、可编程电流调节器，通过四路输出提供电流（LP 和 LY），每路均可提供最高 100 mA，以驱动高亮 LED 阵列。每路输出的经调节的 LED 电流（精确到 5%）由单个参考电阻设置。不使用镇流电阻，每个串的电流匹配优于 10%。使用恒流驱动 LED，确保安全运行，并提供最大的可能照明输出。LJ 封装 的 A6261 提供两个针脚，每个通道 200 mA (A6261LJ-1)，以及 100 mA 和 200 mA 最大输出电流 (A6261LJ)。\n\n通过启用输入指令提供输出控制，为 PWM 应用提供直接控制。输出可根据需要并联或闲置。\n • 符合 AEC Q-100 汽车级标准;

Automotive LED Array Driver

The A6262 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs. The regulated LED current from each output, accurate to 5%, is set by a single reference resistor. Current matching in each string is better than 10% \n• Total LED drive current up to 400 mA \n• 6 to 50 V supply \n• LED output short-to-ground and thermal protection \n• Enable input for PWM control \n• Current set by reference resistor \n• Automotive K-temperature range (–40°C to 150°C) ;

汽车停车/尾灯 LED 阵列驱动器

全新的 A6264 是一款线性、可编程电流调节器，通过四路输出提供电流，每路均可提供最高 100 mA，以驱动高亮 LED 阵列。LED 电流能够为停止/尾部应用进行大电流和小电流切换。每路输出的两个 LED 电流（精确到 5%）由两个参考电阻设置。不使用镇流电阻，每个串的电流匹配优于 10%。使用恒流驱动 LED，确保安全运行，并提供最大的可能照明输出。\n\n驱动四个 LED 的灯串（每个包括 1 至 3 个 LED），每个灯串总电流最大为 100 mA，由此实现最优性能。输出可根据需要并联或闲置。\n\n在任何 LED 输出引脚短路接地时提供短路检测以保护 LED 和 A • 符合 AEC Q-100 汽车级标准\n• LED 总驱动电流高达 400 mA\n• 最多 4个串，均分电流 100mA。\n• 6 至 50V 电源电压\n• 低压降电压\n• LED 输出对地短路和热保护\n• 电流转换速率限制\n• 参考电阻器设置电流\n• 汽车 K-温度范围：–40°C 至 150°C;

High Brightness LED Current Regulator

文件：302.64 Kbytes Page：12 Pages

封装/外壳：8-SOIC（0.154"，3.90mm 宽）裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC LED DRVR LIN PWM 350MA 8SOIC 集成电路（IC） LED 驱动器

The A6261 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

文件：358 Kbytes Page：15 Pages

The A6261 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

文件：358 Kbytes Page：15 Pages

The A6261 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

文件：358 Kbytes Page：15 Pages

The A6261 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

文件：358 Kbytes Page：15 Pages

The A6262 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

文件：359.05 Kbytes Page：15 Pages

Automotive LED Array Driver

文件：1.64714 Mbytes Page：16 Pages

Automotive LED Array Driver

文件：1.64714 Mbytes Page：16 Pages

Automotive LED Array Driver

文件：1.64714 Mbytes Page：16 Pages

The A6262 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

文件：359.05 Kbytes Page：15 Pages

The A6262 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

文件：359.05 Kbytes Page：15 Pages

Automotive LED Array Driver

文件：1.64714 Mbytes Page：16 Pages

Automotive LED Array Driver

文件：1.64714 Mbytes Page：16 Pages

Protected LED Array Driver

文件：255.1 Kbytes Page：11 Pages

The A6264 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

文件：374.29 Kbytes Page：16 Pages

The A6264 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

文件：374.29 Kbytes Page：16 Pages

The A6264 is a linear, programmable current regulator providing up to 100 mA from each of four outputs to drive arrays of high brightness LEDs.

文件：374.29 Kbytes Page：16 Pages

The A6265 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series.

文件：349.57 Kbytes Page：17 Pages

The A6265 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series.

文件：349.57 Kbytes Page：17 Pages

The A6266 is a boost converter controller, providing a programmable constant current output for driving high power LEDs in series.

文件：338.38 Kbytes Page：17 Pages

The A6266 is a boost converter controller, providing a programmable constant current output for driving high power LEDs in series.

文件：338.38 Kbytes Page：17 Pages

The A6267 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series.

文件：349.09 Kbytes Page：17 Pages

The A6267 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series.

文件：349.09 Kbytes Page：17 Pages

The A6268 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series.

文件：369 Kbytes Page：19 Pages

The A6268 is a DC-to-DC converter controller, providing a programmable constant current output for driving high power LEDs in series.

文件：369 Kbytes Page：19 Pages

Automotive LED Array Driver

文件：286.52 Kbytes Page：15 Pages

Silicon Rectifier Fast Recovery

Description: The NTE625 and NTE626 are fast recovery silicon rectifiers in a 2–Lead TO220 type package designed for special applications such as DC power supplies, inverters, converters, ultrasonic systems, choppers and low RF interference. Features: Low Forward Voltage High Current

REAL TIME EMULATION DEVELOPMENT TOOLS FOR ST6 MCU FAMILY

GENERAL DESCRIPTION The ST6 Real Time Development System is an advanced hardware development system designed and configured to provide comprehensive support for the ST6 family of MCUs. HARDWARE FEATURES ■ Supports ST62 and ST63 family ■ Real time emulation ■ 32 KBytes of emulation memory ■ B

Low voltage high performance mixer FM IF system with high-speed RSSI

文件：231.76 Kbytes Page：16 Pages

Low voltage high performance mixer FM IF system with high-speed RSSI

文件：231.76 Kbytes Page：16 Pages

Low voltage high performance mixer FM IF system with high-speed RSSI

文件：231.76 Kbytes Page：16 Pages