The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector.

Description The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. This device can be used with an infrared photoelectric chamber to sense scattered light from smoke particles. A networking capability allows as many as 50 units to

的A5358是低电流的BiCMOS电路的光电式烟雾检测器提供所有需要的特性。 (The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector.)

The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. This device can be used with an infrared photoelectric chamber to sense scattered light from smoke particles. A networking capability allows as many as 50 units to be interconnec •Low average standby current for long battery life \n•Interconnect up to 50 detectors \n•Piezoelectric horn driver \n•Low battery detection (all internal) \n•Chamber sensitivity test and alarm \n•Power-on reset (POR) \n•Internal timer and control for reduced sensitivity mode \n•Built-in circuits to ;

The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector.

Description The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. This device can be used with an infrared photoelectric chamber to sense scattered light from smoke particles. A networking capability allows as many as 50 units to

PHOTOELECTRIC SMOKE DETECTOR WITH INTERCONNECT AND TIMER

PHOTOELECTRIC SMOKE DETECTOR WITH INTERCONNECT AND TIMER The A5358CA is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. This device can be used in conjunction with an infrared photoelectric chamber to sense scattered light from smoke pa

The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector.

Description The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. This device can be used with an infrared photoelectric chamber to sense scattered light from smoke particles. A networking capability allows as many as 50 units to

The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector.

Description The A5358 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. This device can be used with an infrared photoelectric chamber to sense scattered light from smoke particles. A networking capability allows as many as 50 units to

Photoelectric Smoke Detector with Interconnect and Timer

文件：325.32 Kbytes Page：13 Pages

封装/外壳：16-DIP（0.300"，7.62mm） 包装：托盘 描述：IC SMOKE DETECTOR PHOTO 16DIP 集成电路（IC） 传感器和检测器接口

封装/外壳：16-SOIC（0.295"，7.50mm 宽） 包装：管件 描述：IC SMOKE DETECTOR PHOTO 16SOIC 集成电路（IC） 传感器和检测器接口

PHOTOELECTRIC SMOKE DETECTOR WITH INTERCONNECT AND TIMER

PHOTOELECTRIC SMOKE DETECTOR WITH INTERCONNECT AND TIMER The A5358CA is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. This device can be used in conjunction with an infrared photoelectric chamber to sense scattered light from smoke pa

ZENER DIODE CHIPS

• ZENER DIODE CHIPS • ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE • ELECTRICALLY EQUIVALENT TO 1N5333B THRU 1N5379B • 5 WATT CAPABILITY WITH PROPER HEAT SINKING • COMPATIBLE WITH ALL WIRE BONDING AND DIE ATTACH TECHNIQUES, WITH THE EXCEPTION OF SOLDER REFLOW

HIGH POWER ZENER DIODE 6.8 VOLTS THRU 200 VOLTS 5.0W, 5 TOLERANCE

DESCRIPTION: The CENTRAL SEMICONDUCTOR CMZ5334B series silicon Zener diodes are voltage regulators, manufactured in an epoxy molded surface mount package, and designed for use in industrial, commercial, entertainment and computer applications. MARKING: SEE MARKING CODE ON ELECTRICAL CHARACTERIST

Quad Channel OC-12c ATM and POS Physical Layer Device

FEATURES • Single chip quad ATM and POS UserNetwork Interface operating at 622 Mbit/s. • Implements the ATM Forum User Network Interface Specification and the ATM physical layer for Broadband ISDN according to CCITT Recommendation I.432. • Implements the Point-to-Point Protocol (PPP) over SONET

Silicon 5.0 Watt Zener Diodes

Features ● Surface Mount Application ● 11 thru 200 Volt Voltage Range ● Built-in strain relief ● Glass passivated junction ● Low induct Mechanical Data ● Case: JEDEC DO-214AB Molded plastic over passivated junction ● Terminals solderable per MIL-STD-750, Method 2026 ● Standard Packaging: