Full-Bridge PWM Motor Driver

Description Designed for bidirectional pulse width modulated (PWM) current control of inductive loads, the A4973 is capable of continuous output currents to ±1.5 A and operating voltages to 50 V. Internal fixed off-time PWM current-control circuitry can be used to regulate the maximum load curren

Full-Bridge PWM Motor Driver

Designed for bidirectional pulse width modulated (PWM) current control of inductive loads, the A4973 is capable of continuous output currents to ±1.5 A and operating voltages to 50 V. Internal fixed off-time PWM current-control circuitry can be used to regulate the maximum load current to a desired \n• ±1.5 A continuous output current\n• 50 V output voltage rating\n• 3 V to 5.5 V logic supply voltage\n• Internal PWM current control\n• Fast and slow current-decay modes\n• Sleep (low current consumption) mode\n• Internal transient-suppression diodes\n• Internal thermal shutdown circuitry\n• Cros;

Full-Bridge PWM Motor Driver

Description Designed for bidirectional pulse width modulated (PWM) current control of inductive loads, the A4973 is capable of continuous output currents to ±1.5 A and operating voltages to 50 V. Internal fixed off-time PWM current-control circuitry can be used to regulate the maximum load curren

Full-Bridge PWM Motor Driver

Description Designed for bidirectional pulse width modulated (PWM) current control of inductive loads, the A4973 is capable of continuous output currents to ±1.5 A and operating voltages to 50 V. Internal fixed off-time PWM current-control circuitry can be used to regulate the maximum load curren

Full-Bridge PWM Motor Driver

文件：286.03 Kbytes Page：11 Pages

封装/外壳：16-PowerDIP（0.300"，7.62mm） 功能：驱动器 - 全集成，控制和功率级 包装：管件 描述：IC MTR DRVR BIPOLAR 3-5.5V 16DIP 集成电路（IC） 电机驱动器，控制器

封装/外壳：16-PowerSOIC（0.295"，7.50mm 宽） 功能：驱动器 - 全集成，控制和功率级 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC MTR DRV BIPOLAR 3-5.5V 16SOIC 集成电路（IC） 电机驱动器，控制器

Surge Clamping, Transient Overvoltage Suppressor Bidirectional

Description: The NTE4900 series of silicon Transient Suppressors designed to protect voltage sensitive components from high energy voltage transients. Transient over voltage suppressor devices have become very important as a consequence of their high surge capability, extremely fast response time

1.2W TWO AUDIO INPUTS WITH GAIN CONTROL POWER AMPLIFIER WITH STANDBY MODE ACTIVE LOW

Description At 3.3v, the TS4973 is an Audio Power Amplifier capable of delivering 500mW of continuous RMS output power into a 8Ω bridged-tied loads with 1 THD+N, and 150mWof continuous average power into 32Ω. An external standby mode control reduces the supply current to less than 10nA. An intern

1.2W TWO AUDIO INPUTS WITH GAIN CONTROL POWER AMPLIFIER WITH STANDBY MODE ACTIVE LOW

Description At 3.3v, the TS4973 is an Audio Power Amplifier capable of delivering 500mW of continuous RMS output power into a 8Ω bridged-tied loads with 1 THD+N, and 150mWof continuous average power into 32Ω. An external standby mode control reduces the supply current to less than 10nA. An intern

3.5A STEP DOWN SWITCHING REGULATOR

文件：222.74 Kbytes Page：16 Pages

Dual P-Channel 25-V (G-S) MOSFET

文件：46.81 Kbytes Page：5 Pages