Full-Bridge DMOS PWM Motor Driver

Description Designed for pulse width modulated (PWM) control of DC motors, the A4950 is capable of peak output currents to ±3.5 A and operating voltages to 40 V. Input terminals are provided for use in controlling the speed and direction of a DC motor with externally applied PWM control sign

Full-Bridge DMOS PWM Motor Driver

Description Designed for pulse width modulated (PWM) control of DC motors, the A4950 is capable of peak output currents to ±3.5 A and operating voltages to 40 V. Input terminals are provided for use in controlling the speed and direction of a DC motor with externally applied PWM control sign

全桥式 DMOS PWM 电动机驱动器

通过脉宽调制 (PWM) 控制直流电动机，A4950 能够提供 ±3.5  安培的峰值输出电流，工作电压为 40  伏特。\n\n该产品可提供输入端子，通过外部施加的 PWM 控制信号控制直流电动机的速度与方向。采用内部同步整流控制电路降低脉宽调制 (PWM) 操作时的功率消耗。\n\n内部电路保护包括过电流保护、电动机引脚接地短路或电源短路、带时延的过热关机、VBB 欠压监视以及交叉电流保护。\n\nA4950 采用带有外露散热板的 8 引脚 SOICN 小型封装（后缀 LJ）。该封装为无铅封装，且引脚框采用 100% 雾锡电镀。 • 低 RDS(开) 输出 \n• 过电流保护 (OCP) • 电动机短路保护 \n• 电动机引脚接地短路保护 \n• 电动机引脚电池短路保护 \n\n• 低功耗待机模式 \n• 可调 PWM 电流限制 \n• 同步整流 \n• 内部欠压锁定 (UVLO) \n• 交叉电流保护 ;

Full-Bridge DMOS PWM Motor Driver

Description Designed for pulse width modulated (PWM) control of DC motors, the A4950 is capable of peak output currents to ±3.5 A and operating voltages to 40 V. Input terminals are provided for use in controlling the speed and direction of a DC motor with externally applied PWM control sign

Full-Bridge DMOS PWM Motor Driver

Description Designed for pulse width modulated (PWM) control of DC motors, the A4950 is capable of peak output currents to ±3.5 A and operating voltages to 40 V. Input terminals are provided for use in controlling the speed and direction of a DC motor with externally applied PWM control sign

3.6A Brushed DC Motor Driver

Features » H-Bridge Motor Driver, Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads « Wide 6.5V to 40V Operating Voltage » 3.6A Peak Current Drive « PWM Control Interface o Integrated Current Regulation o Low-Power Sleep Mode «VM under voltage Lockout (UVLO) » Over curre

Full-Bridge DMOS PWM Motor Driver

Description Designed for pulse width modulated (PWM) control of DC motors, the A4950 is capable of peak output currents to ±3.5 A and operating voltages to 40 V. Input terminals are provided for use in controlling the speed and direction of a DC motor with externally applied PWM control sign

Full-Bridge DMOS PWM Motor Driver

Description Designed for pulse width modulated (PWM) control of DC motors, the A4950 is capable of peak output currents to ±3.5 A and operating voltages to 40 V. Input terminals are provided for use in controlling the speed and direction of a DC motor with externally applied PWM control sign

Full-Bridge DMOS PWM Motor Driver

文件：231.48 Kbytes Page：9 Pages

封装/外壳：8-SOIC（0.154"，3.90mm 宽）裸露焊盘 功能：驱动器 - 全集成，控制和功率级 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC MOTOR DRIVER 8V-40V 8SOIC 集成电路（IC） 电机驱动器，控制器

封装/外壳：8-SOIC（0.154"，3.90mm 宽）裸露焊盘 功能：驱动器 - 全集成，控制和功率级 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC MOTOR DRIVER 8V-40V 8SOIC 集成电路（IC） 电机驱动器，控制器

Low-Voltage PLL Clock Driver

Description The LCK4950 is a PLL-based clock driver device intended for high-performance clock tree designs. The LCK4950 is 3.3 V compatible with output frequencies of up to 180 MHz and output skews of 200 ps. The LCK4950 can accommodate the most demanding tree designs by employing a fully differ

Adjustable Output, Low Current Single Cell Boost Regulator with Detect

GENERAL DESCRIPTION The ML4950 is a low power boost regulator designed for low voltage DC to DC conversion in single cell battery powered systems. The maximum switching frequency can exceed 100kHz, allowing the use of small, low cost inductors. FEATURES ■ Guaranteed full load start-up and opera

Adjustable Output, Low Current Single Cell Boost Regulator with Detect

GENERAL DESCRIPTION The ML4950 is a low power boost regulator designed for low voltage DC to DC conversion in single cell battery powered systems. The maximum switching frequency can exceed 100kHz, allowing the use of small, low cost inductors. FEATURES ■ Guaranteed full load start-up and opera

Adjustable Output, Low Current Single Cell Boost Regulator with Detect

GENERAL DESCRIPTION The ML4950 is a low power boost regulator designed for low voltage DC to DC conversion in single cell battery powered systems. The maximum switching frequency can exceed 100kHz, allowing the use of small, low cost inductors. FEATURES ■ Guaranteed full load start-up and opera

Surge Clamping, Transient Overvoltage Suppressor Unidirectional

Description: The NTE4900 series of silicon Transient Suppressors designed to protect voltage sensitive components from high energy voltage transients. Transient over voltage suppressor devices have become very important as a consequence of their high surge capability, extremely fast response time