丝印代码：A218；1A Equipped with Low Power Mode Ultra-Low Noise Low Dropout Voltage Regulator

FEATURES ⚫ Input Voltage Range (Maximum Rating): 1.7 V to 5.5 V (6.5 V) ⚫ Output Voltage Range: 1.0 V to 5.0 V ⚫ Output Voltage Accuracy: ± 1.0% (VSET ≥ 1.8 V, Ta = 25 °C) ⚫ Output Current: 1.0 A ⚫ Quiescent Current (VMODE = Low): Typ. 17 μA ⚫ Quiescent Current (VMODE = High): Typ. 1.5

Power Amplifier Applications Driver Stage Amplifier Applications

Features ・High transition frequency: fT = 80 MHz (typ.)

High Current Switching Applications

Features - Low collector-emitter saturation : VCE(sat) = −1.0 V（max）

High Voltage Switching Applications

文件：213 Kbytes Page：5 Pages

Low Cost, Miniature DIP 2W, Very High Isolation DC/DC Converters

文件：190.7 Kbytes Page：2 Pages

A200EHI SERIES

文件：223.66 Kbytes Page：2 Pages

6 kVDC Isolation, 2W Single & Dual Output DC/DC Converters

27W SWITCHING REGULATOR FOR AUTOMOTIVE APPLICATION

DESCRIPTION The GS-R218 is a switching voltage regulator that can deliver an output current of 1,5 A at 18 V when supplied by a car battery. The regulator uses a cigar lighter case with a coiled cord and it is protected against overloads and short circuits at the output (latching overload protec

Thyristors(Silicon Controlled Rectifiers)

. . . designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled, solid-state devices are needed. • Glass-Passivated Junctions • Blocking Voltage to 800 Volts • TO-220 Construction —

Silicon PNP Transistor Audio Power Output

Description: The NTE218 is ideal for use as a driver, switch and medium–power amplifier applications. This device features: Features: • Low Saturation Voltage – 0.6VCE(sat) @ IC = 1A • High Gain Characteristics – hFE @ IC = 250mA: 30–100 • Excellent Safe Area Limits

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE

Operational Amplifiers

文件：597.13 Kbytes Page：18 Pages