Sensitive Two-Wire Chopper-Stabilized Unipolar Hall-Effect Switches

FEATURES AND BENEFITS ■Chopper stabilization • Low switchpoint drift over operating temperature range • Low stress sensitivity ■Factory programmed at end-of-line for optimized switchpoints ■On-chip protection • Supply transient protection • Reverse-battery protection • On-board voltage re

Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches

Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Factory programmed at end-of-line for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board vo

Sensitive Two-Wire Chopper-Stabilized Unipolar Hall Effect Switches

Features and Benefits ▪ Chopper stabilization ▫ Low switchpoint drift over operating temperature range ▫ Low sensitivity to stress ▪ Factory programmed at end-of-line for optimized switchpoints ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board vo

封装/外壳：SOT-23W 功能：单极开关 包装：散装 描述：MAGNETIC SWITCH UNIPOLAR SOT23W 传感器，变送器 磁性传感器 - 开关（固态）

封装/外壳：SOT-23W 功能：单极开关 包装：散装 描述：MAGNETIC SWITCH UNIPOLAR SOT23W 传感器，变送器 磁性传感器 - 开关（固态）

Sensitive Two-Wire Chopper-Stabilized Unipolar Hall-Effect Switches

FEATURES AND BENEFITS ■Chopper stabilization • Low switchpoint drift over operating temperature range • Low stress sensitivity ■Factory programmed at end-of-line for optimized switchpoints ■On-chip protection • Supply transient protection • Reverse-battery protection • On-board voltage re

1143 Differential Pressure Gauge

FEATURES Glass filled nylon case High static pressure capability of 500 psi Ranges from 1 IWD to 25 IWD Reed switches (OPT.) for direct system control Superior magnets for smoother pointer motion Buna-N Diaphragm & O-Rings (others available) Large convoluted diaphragm actuator

Micro Servo - MG90D High Torque Metal Gear

 Size : 22.8 x 12.2 x 28.5 mm  Voltage : 4.8V to 6V DC  Weight: 13.4 grams  Speed : 0.1 sec/60degrees (at 4.8V), 0.08 sec/60 degrees (at 6.0V)  Stall Torque : At 4.8V: 2.1 kg-cm / 25 oz-in. At 6.0V: 2.4 kg-cm / 30.5 oz-in  Spline Count: 20

Original Strain Relief Bushings

文件：129.02 Kbytes Page：1 Pages