SHIELDED SMT POWER INDUCTORS

● FEATURE Various high power inductor are Superior to be high saturation for surface mounting ● APPLICATIONS 2 DC/DC converter power supply, Telecommunication equipment

Screw/plug-in terminal strip Screw/screwless connection

The terminal strip 820 with pitch 10 mm has a dual wire terminal connector on one side. Here, the leads are inserted and clamped all the way to the stop. These terminal strips are designed for solid conductors. The opposite side is equipped with screw connections with rectangular clamping spac

POWER INDUCTOR

●FEATURE 1. Excellent solder heat resistance(add “C” is for high current type) 2. Low voltage drops and small variations inductance ●APPLICATION 1. DC power supply circuits 2. Power line choke coils…etc

WIRE WOUND SMD INDUCTOR

●FEATURE 1. Low core loss for high frequency power application 2. Large terminal surface ●APPLICATION 1. Portable communication equipment, notebook computer

TREK 820 INFINITRON®

APPLICATIONS  Accurate reading of electrostatic voltage levels associated with ESD sensitive components, circuits, and surfaces

SLEEK AND SLIM, WITH SOFTLY ROUNDED CORNERS AND GENTLY CURVED ROCKERS, NEXUS COMBINES SUPERIOR QUALITY WITH STUNNING GOOD LOOK SAND EASY INSTALLATION.

10AX PLATE SWITCHES 20A SWITCHES 45A SWITCHES 13 AMP SOCKET OUTLETS ROUND PIN SOCKET OUTLETS 13 AMP FUSED CONNECTION UNITS 13 AMP FUSED CONNECTION UNITS WITH FLEX OUTLET 25 AMP FLEX OUTLET PLATE SHAVER SOCKET CO-AXIAL, SATELLITE AND TRIPLEX OUTLETS TELEPHONE & DATA OUTLETS DIMMERS SURF

Panel Mount Enclosed Fuseholders

文件：651.32 Kbytes Page：2 Pages

Premier Supplier of Electronic Hardware

文件：5.0379 Mbytes Page：60 Pages

包装：散装 描述：TERM LUG STRIP 5POS 0.375\ 连接器，互连器件 端子条和转台板

包装：散装 描述：CONN JACK MONO 6.35MM 连接器，互连器件 音频连接器

Panel Mount, Shocksafe 5x20mm Fuses

文件：85.15 Kbytes Page：1 Pages

pH measuring system for hygienic applica-tions

The type 8201 pH measuring system is suitable for measuring absolute pH values in liquids between pH 0 and pH 12 at medium temperatures of up to 140°C and process pressures of max. 6 bar. Due to its hygienic design and the robust glass-free construction, this model is particularly suitable for

Conductivity sensor for hygienic applications

The Type 8221 hygienic conductivity probes are used to determine electrical conductivity in a wide range of pure or concentrated liquids. Due to their hygienic and robust design, these conductivity probes are suitable for use in various application sectors, including the food & beverage, pharma

Chlorine sensor

The 8232 from Bürkert is an electrochemical sensor for measuring the free or total chlorine content of an inorganic source (chlorine gas, sodium hypochlorite solution, ...). Four variants of Type 8232 are available: • The “Trace” chlorine sensor (zero chlorine) equipped with three electrodes

General purpose filter/regulator Excelon® Plus Modular System

Technical features Compressed air only Maximum supply pressure: Polycarbonate bowl: 10 bar (145 psi) Metal bowl: 17 bar (246 psi) Outlet pressure ranges: 0.3 ... 10 bar (4 ... 145 psi), 0.3 ... 4 bar (4 ... 58 psi) optional, 0.7 ... 17 bar (2 ... 246 psi) optional Filter element: 5 μm &

General purpose filter/regulator Excelon® Plus Modular System

Technical features Compressed air only Maximum supply pressure: Polycarbonate bowl: 10 bar (145 psi) Metal bowl: 17 bar (246 psi) Outlet pressure ranges: 0.3 ... 10 bar (4 ... 145 psi), 0.3 ... 4 bar (4 ... 58 psi) optional, 0.7 ... 17 bar (2 ... 246 psi) optional Filter element: 5 μm &

General purpose filter/regulator Excelon® Plus Modular System

Technical features Compressed air only Maximum supply pressure: Polycarbonate bowl: 10 bar (145 psi) Metal bowl: 17 bar (246 psi) Outlet pressure ranges: 0.3 ... 10 bar (4 ... 145 psi), 0.3 ... 4 bar (4 ... 58 psi) optional, 0.7 ... 17 bar (2 ... 246 psi) optional Filter element: 5 μm &

General purpose filter/regulator Excelon® Plus Modular System

Technical features Compressed air only Maximum supply pressure: Polycarbonate bowl: 10 bar (145 psi) Metal bowl: 17 bar (246 psi) Outlet pressure ranges: 0.3 ... 10 bar (4 ... 145 psi), 0.3 ... 4 bar (4 ... 58 psi) optional, 0.7 ... 17 bar (2 ... 246 psi) optional Filter element: 5 μm &

General purpose filter/regulator Excelon® Plus Modular System

Technical features Compressed air only Maximum supply pressure: Polycarbonate bowl: 10 bar (145 psi) Metal bowl: 17 bar (246 psi) Outlet pressure ranges: 0.3 ... 10 bar (4 ... 145 psi), 0.3 ... 4 bar (4 ... 58 psi) optional, 0.7 ... 17 bar (2 ... 246 psi) optional Filter element: 5 μm &

General purpose filter/regulator Excelon® Plus Modular System

Technical features Compressed air only Maximum supply pressure: Polycarbonate bowl: 10 bar (145 psi) Metal bowl: 17 bar (246 psi) Outlet pressure ranges: 0.3 ... 10 bar (4 ... 145 psi), 0.3 ... 4 bar (4 ... 58 psi) optional, 0.7 ... 17 bar (2 ... 246 psi) optional Filter element: 5 μm &

General purpose filter/regulator Excelon® Plus Modular System

Technical features Compressed air only Maximum supply pressure: Polycarbonate bowl: 10 bar (145 psi) Metal bowl: 17 bar (246 psi) Outlet pressure ranges: 0.3 ... 10 bar (4 ... 145 psi), 0.3 ... 4 bar (4 ... 58 psi) optional, 0.7 ... 17 bar (2 ... 246 psi) optional Filter element: 5 μm &

E-DAT modul Cat.6A 8(8) jack, T568B

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

E-DAT modul Cat.6A 8(8) jack, T568A

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

C6Amodul K 270° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 270° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

C6Amodul K 90° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 90° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

E-DAT modul Cat.6A K jack - Keystone style

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

Modul 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Modul design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded modules are connected by means

Keystone 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Keystone design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded Keystone modules are connec

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

C6Amodul 24 port 180°M 1RU stainless steel

Product specification • 19 inch 1RU stainless steel module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class E

C6Amodul 270° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 270° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools; strain relief directly snapped on to stuffer cap • easy to install connection

C6Amodul K 180° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

E-DAT modul Cat.6A 8(8) jack, T568B

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

E-DAT modul Cat.6A 8(8) jack, T568A

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

C6Amodul K 270° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 270° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

C6Amodul K 90° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 90° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

E-DAT modul Cat.6A K jack - Keystone style

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

Modul 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Modul design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded modules are connected by means

Keystone 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Keystone design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded Keystone modules are connec

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

C6Amodul 24 port 180°M 1RU stainless steel

Product specification • 19 inch 1RU stainless steel module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class E

C6Amodul 270° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 270° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools; strain relief directly snapped on to stuffer cap • easy to install connection

C6Amodul K 180° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

E-DAT modul Cat.6A 8(8) jack, T568B

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

E-DAT modul Cat.6A 8(8) jack, T568A

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

E-DAT modul Cat.6A K jack - Keystone style

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

Modul 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Modul design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded modules are connected by means

Keystone 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Keystone design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded Keystone modules are connec

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

C6Amodul 24 port 180°M 1RU stainless steel

Product specification • 19 inch 1RU stainless steel module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class E

C6Amodul 270° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 270° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools; strain relief directly snapped on to stuffer cap • easy to install connection

C6Amodul K 180° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

C6Amodul K 270° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 270° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

C6Amodul K 90° jack - keystone style

Product specification • modular Cat.6A termination unit RJ45 • mounting version: Keystone, 90° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems

E-DAT modul Cat.6A 8(8) jack, T568B

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

E-DAT modul Cat.6A 8(8) jack, T568A

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

E-DAT modul Cat.6A K jack - Keystone style

Product specification • modular termination unit Cat.6A, RJ45 • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • tested: Link up to 500 MHz • suitable f

Keystone 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Keystone design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded Keystone modules are connec

C6Amodul 180° jack

Product specification • modular Cat.6A termination unit RJ45 • mounting version: module, 180° cable feed • solid, one-piece and reusable module housing refined with zinc die-casting • mounting without special tools, strain relief directly snapped on to stuffer cap • migration to 25G-systems w

C6Amodul 24 port 180°M 1RU stainless steel

Product specification • 19 inch 1RU stainless steel module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class E