ELECTRONIC WINDSHIELD WIPER SWITCHES

Description Littelfuse Windshield Wiper Switches are designed for in-cabin wiper control. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Electronic Windshield Wiper Switches ensure dependable control of windshield wipers on heavy d

包装：盒 描述：SWITCH ROT W-W 12V ELECT CONN KN 开关 选择开关

ELECTRONIC WINDSHIELD WIPER SWITCHES

Description Littelfuse Windshield Wiper Switches are designed for in-cabin wiper control. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Electronic Windshield Wiper Switches ensure dependable control of windshield wipers on heavy d

ELECTRONIC WINDSHIELD WIPER SWITCHES

Description Littelfuse Windshield Wiper Switches are designed for in-cabin wiper control. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Electronic Windshield Wiper Switches ensure dependable control of windshield wipers on heavy d

Magnetic Field Sensor – Magnetic-inductive Proximity Sensor

Features ■M8 × 1 threaded barrel ■Stainless steel, 1.4427 SO ■Rated operating distance 78 mm with DMR31-15-5 magnet ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Male connector M12 x 1 ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Dema

Magnetic Field Sensor – Magnetic-inductive Proximity Sensor

Features ■Threaded barrel, M12 x 1 ■Chrome-plated brass ■Rated operating distance 90 mm with DMR31-15-5 magnet ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Male connector M12 x 1 ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mo

Magnetic Field Sensor – For Pneumatic Cylinders

Features ■Rectangular, height 24 mm ■Concentric active face ■Plastic, PA12‐GF30 ■Magnetic-inductive sensor ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Male connector M12 x 1 ■ATEX category II 2 G, Ex Zone 1 ■ATEX category II 1 D, Ex Zone 20 ■SIL 2 (Low Demand Mode)

Magnetic Field Sensor – For Pneumatic Cylinders

Features ■Rectangular, height 28 mm ■Metal, GD-Zn ■Magnetic-inductive sensor ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Male connector M12 x 1 ■ATEX category II 2 G, Ex Zone 1 ■ATEX category II 1 D, Ex Zone 20 ■SIL 2 (Low Demand Mode) acc. to IEC 61508, PL c acc.

Magnetic Field Sensor – For Pneumatic Cylinders

Features ■Rectangular, height 28 mm ■Metal, GD-Zn ■Magnetic-inductive sensor ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Male connector M12 x 1 ■ATEX category II 2 G, Ex Zone 1 ■ATEX category II 1 D, Ex Zone 20 ■SIL 2 (Low Demand Mode) acc. to IEC 61508, PL c acc.

Magnetic Field Sensor – For Pneumatic Cylinders

Features ■Rectangular, height 28 mm ■Metal, GD-Zn ■Magnetic-inductive sensor ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Male connector M12 x 1 ■ATEX category II 2 G, Ex Zone 1 ■ATEX category II 1 D, Ex Zone 20 ■SIL 2 (Low Demand Mode) acc. to IEC 61508, PL c acc.

Magnetic Field Sensor – for pneumatic cylinders

Features ■Rectangular, height 6mm ■Plastic, PA12 ■Magnetic-inductive sensor ■DC 2-wire, nom. 8.2 VDC ■Output according DIN EN 60947-5-6 (NAMUR) ■Pigtail with male end, M12 x 1 ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, P

Magnetic Field Sensor – For Pneumatic Cylinders

Features ■Plastic, PA12-GF30 ■Magnetic-inductive sensor ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Male connector M12 x 1 ■ATEX category II 2 G, Ex Zone 1 ■ATEX category II 1 D, Ex Zone 20 ■SIL 2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0

Analog signal isolator 1-channel

The 1-channel analog signal isolator IMCAI-11EX-I/L features an intrinsically safe input circuit. The device can be mounted in zone 2. The device must be protected against mechanical load on connector and housing when mounted in zone 2 or 22. For this, use the TURCK cover plate IMC-SG (Ident

ELECTRONIC WINDSHIELD WIPER SWITCHES

Description Littelfuse Windshield Wiper Switches are designed for in-cabin wiper control. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Electronic Windshield Wiper Switches ensure dependable control of windshield wipers on heavy d

ELECTRONIC WINDSHIELD WIPER SWITCHES

Description Littelfuse Windshield Wiper Switches are designed for in-cabin wiper control. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Electronic Windshield Wiper Switches ensure dependable control of windshield wipers on heavy d

Analog Signal Isolator 1-channel

The 1-channel analog signal isolator IMCAO-11Ex-i/L features an intrinsically safe output circuit. The device can be mounted in zone 2. The device must be protected against mechanical load on connector and housing when mounted in zone 2 or 22. For this, use the TURCK cover plate IMC-SG (Ident

ELECTRONIC WINDSHIELD WIPER SWITCHES

Description Littelfuse Windshield Wiper Switches are designed for in-cabin wiper control. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Electronic Windshield Wiper Switches ensure dependable control of windshield wipers on heavy d

Solenoid Driver 1-channe

The 1-channel solenoid driver IMC-DO-11Ex/L features an intrinsically safe output circuit. The device can be mounted in zone 2. For unprotected mounting in zone 2 or 22 the devices must be additionally protected against mechanical damage with the metal cover plate IMC-SG (Ident no. 7560016)

Isolating transducer 1-channel

The 1-channel isolating transducer IMCAIA-11Ex-i/24VDC features an intrinsically safe input circuit. The device can be mounted in zone 2. The device must be protected against mechanical load on connector and housing when mounted in zone 2 or 22. For this, use the TURCK cover plate IMC-SG (Ide

Isolating switching amplifier 2-channel

The 2-channel IMC-DI-22EX-PNC/24VDC isolating switching amplifier is equipped with intrinsically safe input circuits. Sensors according to EN 60947-5-6 (NAMUR), variable resistors or potential free contactors can be connected to the device. The output circuits feature 2 NO transistors. A gree

Isolating transducer 1-channel

The 1-channel isolating transducer IM33-14EX-CDRI is designed to operate intrinsically safe transmitters in the Ex area and to transmit the measured signals to the nonEx area. The device is equipped with an analog output of 0/4…20 mA; In addition, three relay outputs for limit values are availa

Solenoid Driver 1-channe

The 1-channel solenoid driver IMC-DO-11Ex/L features an intrinsically safe output circuit. The device can be mounted in zone 2. For unprotected mounting in zone 2 or 22 the devices must be additionally protected against mechanical damage with the metal cover plate IMC-SG (Ident no. 7560016)

Analog Signal Isolator 1-channel

The 1-channel analog signal isolator IMCAO-11Ex-i/L features an intrinsically safe output circuit. The device can be mounted in zone 2. The device must be protected against mechanical load on connector and housing when mounted in zone 2 or 22. For this, use the TURCK cover plate IMC-SG (Ident

Analog signal isolator 1-channel

The 1-channel analog signal isolator IMCAI-11EX-I/L features an intrinsically safe input circuit. The device can be mounted in zone 2. The device must be protected against mechanical load on connector and housing when mounted in zone 2 or 22. For this, use the TURCK cover plate IMC-SG (Ident

Isolating switching amplifier 2-channel

The 2-channel IMC-DI-22EX-PNC/24VDC isolating switching amplifier is equipped with intrinsically safe input circuits. Sensors according to EN 60947-5-6 (NAMUR), variable resistors or potential free contactors can be connected to the device. The output circuits feature 2 NO transistors. A gree

Isolating transducer 1-channel

The 1-channel isolating transducer IMCAIA-11Ex-i/24VDC features an intrinsically safe input circuit. The device can be mounted in zone 2. The device must be protected against mechanical load on connector and housing when mounted in zone 2 or 22. For this, use the TURCK cover plate IMC-SG (Ide

Isolating transducer 1-channel

The 1-channel isolating transducer IMCAIA-11Ex-i/24VDC features an intrinsically safe input circuit. The device can be mounted in zone 2. The device must be protected against mechanical load on connector and housing when mounted in zone 2 or 22. For this, use the TURCK cover plate IMC-SG (Ide

ELECTRONIC WINDSHIELD WIPER SWITCHES

Description Littelfuse Windshield Wiper Switches are designed for in-cabin wiper control. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Electronic Windshield Wiper Switches ensure dependable control of windshield wipers on heavy d

ELECTRONIC WINDSHIELD WIPER SWITCHES

Description Littelfuse Windshield Wiper Switches are designed for in-cabin wiper control. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Electronic Windshield Wiper Switches ensure dependable control of windshield wipers on heavy d

ELECTRONIC WINDSHIELD WIPER SWITCHES

Description Littelfuse Windshield Wiper Switches are designed for in-cabin wiper control. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Electronic Windshield Wiper Switches ensure dependable control of windshield wipers on heavy d

包装：盒 描述：SWITCH ROT W-W ELECT KNOB 开关 选择开关

Protective housing For mounting in zone 2

文件：137.24 Kbytes Page：2 Pages

IGBT Module 75A

文件：419.64 Kbytes Page：3 Pages

IGBT Module 75A

文件：391.34 Kbytes Page：3 Pages

Monolithic Linear IC IF Signal Processing (VIF/SIF) IC for use in TV/VCR Applications

文件：390.79 Kbytes Page：16 Pages