Octal buffer/line driver with 5-volt tolerant inputs/outputs 3-Statetitle

DESCRIPTION The 74LVC244A/74LVCH244A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5V devices. In 3-State operation, outputs can handle 5V. These features allow the use of these

LOW VOLTAGE CMOS QUAD BUS BUFFERS (3-STATE) HIGH PERFORMANCE

DESCRIPTION The 74LVC244A is a low voltage CMOS OCTAL BUS BUFFER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 3.6 VCC operations and low power and low noise applications. ■ 5V TOLERANT INPUTS ■ HIGH SPEED: tPD = 5.9ns

Octal buffer/line driver; 3-state

OCTAL BUFFER/LINE DRIVER WITH 3 STATE OUTPUTS

Description The 74LVC244A provides two 4-bit line drivers with separate outputenable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. The device is designed for operation with a power supply rang

Low-Voltage CMOS Octal Buffer

Low-Voltage CMOS Octal Buffer With 5 V−Tolerant Inputs and Outputs (3−State, Non−Inverting) The 74LVC244A is a high performance, non−inverting octal buffer operating from a 1.2 to 3.6 V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL

Octal buffer/line driver; 3-state

1. General description The 74LVC244A; 74LVCH244A are 8-bit buffer/line drivers with 3-state outputs. The devices can be used as two 4-bit buffers or one 8-bit buffer. Both devices features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the o

Standard-logic

The 74LVC244A provides two 4-bit line drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state.\n\n\tThe device is designed for operation with a power supply range of 1.65V •Supply Voltage Range from 1.65V to 3.6V \n•Sinks or Sources 24ma at VCC = 3V \n•CMOS Low Power Consumption \n•IOFF Supports Partial - Power Down Operation \n•Inputs or Outputs Accept up to 5.5V \n•Inputs can be Driven by 3.3V or 5V Allowing for Mixed Voltage Applications \n•Schmitt Trigger Action a;

LOW VOLTAGE CMOS OCTAL BUS BUFFER (3-STATE) HIGH PERFORMANCE

Low-Voltage CMOS Octal Buffer

文件：113.84 Kbytes Page：10 Pages

Octal buffer/line driver; 3-state

Octal buffer/line driver with 5 V tolerant inputs/outputs (3-state)

文件：103.69 Kbytes Page：17 Pages

Octal buffer/line driver; 3-state

Octal buffer/line driver; 3-state

1. General description The 74LVC244A; 74LVCH244A are 8-bit buffer/line drivers with 3-state outputs. The devices can be used as two 4-bit buffers or one 8-bit buffer. Both devices features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the o

Octal buffer/line driver; 3-state

The 74LVC244A-Q100; 74LVCH244A-Q100 is an octal non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Schmitt-trigger action at all inputs makes the cir • Automotive product qualification in accordance with AEC-Q100 (Grade 1)• Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n• 5 V tolerant inputs/outputs for interfacing with 5 V logic\n• Wide supply voltage range from 1.2 V to 3.6 V\n• CMOS low-power consumption\n• Direct interface with;

Octal buffer/line driver; 3-state

1. General description The 74LVC244A-Q100; 74LVCH244A-Q100 is an octal non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Schmitt-trigger action

Octal buffer/line driver; 3-state

Octal buffer/line driver; 3-state

1. General description The 74LVC244A; 74LVCH244A are 8-bit buffer/line drivers with 3-state outputs. The devices can be used as two 4-bit buffers or one 8-bit buffer. Both devices features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the o

Octal buffer/line driver; 3-state

Octal buffer/line driver with 5-volt tolerant inputs/outputs 3-Statetitle

DESCRIPTION The 74LVC244A/74LVCH244A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5V devices. In 3-State operation, outputs can handle 5V. These features allow the use of these

Octal buffer/line driver; 3-state

1. General description The 74LVC244A; 74LVCH244A are 8-bit buffer/line drivers with 3-state outputs. The devices can be used as two 4-bit buffers or one 8-bit buffer. Both devices features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the o

Octal buffer/line driver; 3-state

Octal buffer/line driver with 5-volt tolerant inputs/outputs 3-Statetitle

DESCRIPTION The 74LVC244A/74LVCH244A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5V devices. In 3-State operation, outputs can handle 5V. These features allow the use of these

Octal buffer/line driver; 3-state

1. General description The 74LVC244A-Q100; 74LVCH244A-Q100 is an octal non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Schmitt-trigger action

Low-Voltage CMOS Octal Buffer

Low-Voltage CMOS Octal Buffer With 5 V−Tolerant Inputs and Outputs (3−State, Non−Inverting) The 74LVC244A is a high performance, non−inverting octal buffer operating from a 1.2 to 3.6 V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL

LOW VOLTAGE CMOS QUAD BUS BUFFERS (3-STATE) HIGH PERFORMANCE

DESCRIPTION The 74LVC244A is a low voltage CMOS OCTAL BUS BUFFER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 3.6 VCC operations and low power and low noise applications. ■ 5V TOLERANT INPUTS ■ HIGH SPEED: tPD = 5.9ns

Octal buffer/line driver with 5-volt tolerant inputs/outputs 3-Statetitle

DESCRIPTION The 74LVC244A/74LVCH244A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5V devices. In 3-State operation, outputs can handle 5V. These features allow the use of these

Octal buffer/line driver; 3-state

Octal buffer/line driver; 3-state

1. General description The 74LVC244A; 74LVCH244A are 8-bit buffer/line drivers with 3-state outputs. The devices can be used as two 4-bit buffers or one 8-bit buffer. Both devices features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the o

Octal buffer/line driver; 3-state

1. General description The 74LVC244A-Q100; 74LVCH244A-Q100 is an octal non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Schmitt-trigger action

Octal buffer/line driver; 3-state

1. General description The 74LVC244A-Q100; 74LVCH244A-Q100 is an octal non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Schmitt-trigger action

OCTAL BUFFER/LINE DRIVER WITH 3 STATE OUTPUTS

Description The 74LVC244A provides two 4-bit line drivers with separate outputenable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. The device is designed for operation with a power supply rang

OCTAL BUFFER/LINE DRIVER WITH 3 STATE OUTPUTS

Description The 74LVC244A provides two 4-bit line drivers with separate outputenable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. The device is designed for operation with a power supply rang

LOW VOLTAGE CMOS QUAD BUS BUFFERS (3-STATE) HIGH PERFORMANCE

DESCRIPTION The 74LVC244A is a low voltage CMOS OCTAL BUS BUFFER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 3.6 VCC operations and low power and low noise applications. ■ 5V TOLERANT INPUTS ■ HIGH SPEED: tPD = 5.9ns

Octal buffer/line driver with 5 V tolerant inputs/outputs (3-state)

文件：103.69 Kbytes Page：17 Pages

Low-Voltage CMOS Octal Buffer

文件：113.84 Kbytes Page：10 Pages

Octal buffer/line driver with 5 V tolerant inputs/outputs (3-state)

文件：103.69 Kbytes Page：17 Pages

Octal buffer/line driver; 3-state

封装/外壳：20-VFQFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BUF NON-INVERT 3.6V 20DHVQFN 集成电路（IC） 缓冲器，驱动器，接收器，收发器

Octal buffer/line driver; 3-state

封装/外壳：20-XFQFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BUF NON-INVERT 3.6V 20DHXQFN 集成电路（IC） 缓冲器，驱动器，接收器，收发器

Octal buffer/line driver; 3-state

Octal buffer/line driver with 5 V tolerant inputs/outputs (3-state)

文件：103.69 Kbytes Page：17 Pages

Octal buffer/line driver with 5 V tolerant inputs/outputs (3-state)

文件：103.69 Kbytes Page：17 Pages

Octal buffer/line driver; 3-state

Low-Voltage CMOS Octal Buffer

文件：113.84 Kbytes Page：10 Pages

Low-Voltage CMOS Octal Buffer

文件：113.84 Kbytes Page：10 Pages

Low-Voltage CMOS Octal Buffer

文件：113.84 Kbytes Page：10 Pages

Octal buffer/line driver; 3-state

Octal buffer/line driver with 5 V tolerant inputs/outputs (3-state)

文件：103.69 Kbytes Page：17 Pages

Octal buffer/line driver; 3-state

NXP Logic ??Q100 logic portfolio

Octal buffer/line driver with 5-volt tolerant inputs/outputs 3-Statetitle

DESCRIPTION The 74LVC244A/74LVCH244A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5V devices. In 3-State operation, outputs can handle 5V. These features allow the use of these