Octal transceiver with direction pin; 30 ohm series termination resistors; 5 V input/output tolerant; 3-state

DESCRIPTION The 74LVC2245A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 or 5 V devices. In 3-state operation, outputs can handle 5 V. These features allow the use of these devices

Octal transceiver with direction pin, 30 Ω series termination resistors; 5 V tolerant input/output; 3-state

1. General description The 74LVC2245A is an 8-bit transceiver with 30 Ω termination resistors and 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven f

Octal transceiver with direction pin

封装/外壳：20-VFQFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC TXRX NON-INVERT 3.6V 20DHVQFN 集成电路（IC） 缓冲器，驱动器，接收器，收发器

Octal transceiver with direction pin; 30 ohm series termination resistors; 5 V input/output tolerant; 3-state

DESCRIPTION The 74LVC2245A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 or 5 V devices. In 3-state operation, outputs can handle 5 V. These features allow the use of these devices

Octal transceiver with direction pin, 30 Ω series termination resistors; 5 V tolerant input/output; 3-state

1. General description The 74LVC2245A is an 8-bit transceiver with 30 Ω termination resistors and 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven f

Octal transceiver with direction pin; 30 ohm series termination resistors; 5 V input/output tolerant; 3-state

DESCRIPTION The 74LVC2245A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 or 5 V devices. In 3-state operation, outputs can handle 5 V. These features allow the use of these devices