丝印代码：74LV541A；SN74LV541A Octal Buffers/Drivers With 3-State Outputs

1 Features • 2-V to 5.5-V VCC operation • Max tpd of 6 ns at 5 V • Typical VOLP (output ground bounce) 2.3 V at VCC = 3.3 V, TA = 25°C • Support mixed-mode voltage operation on all ports • Ioff supports partial-powe

丝印代码：74LV541A；SN74LV541A Octal Buffers/Drivers With 3-State Outputs

1 Features • 2-V to 5.5-V VCC operation • Max tpd of 6 ns at 5 V • Typical VOLP (output ground bounce) 2.3 V at VCC = 3.3 V, TA = 25°C • Support mixed-mode voltage operation on all ports • Ioff supports partial-powe

丝印代码：74LV541A；SN74LV541A Octal Buffers/Drivers With 3-State Outputs

1 Features • 2-V to 5.5-V VCC operation • Max tpd of 6 ns at 5 V • Typical VOLP (output ground bounce) 2.3 V at VCC = 3.3 V, TA = 25°C • Support mixed-mode voltage operation on all ports • Ioff supports partial-powe

Octal Buffer/Line Driver with 3-State Outputs

The 74LV541A is an octal buffer/line driver with 3-state outputs, which can accept supply voltage range from 2.0V to 5.5V. The device is the best choice for driving bus lines or buffer memory address registers. The inputs and outputs are placed on opposite sides of the package, making it easier to p • Wide Supply Voltage Range: 2.0V to 5.5V\n• All Ports Support Mixed-Mode Voltage Operation\n• Support Partial Power-Down Mode\n• -40℃ to +125℃ Operating Temperature Range\n• Available in Green SOIC-20 and TSSOP-20 Packages;

Octal buffer/line driver; 3-state

文件：737.65 Kbytes Page：14 Pages

八进制缓冲器/线路驱动器，具备三态输出功能

74LV541AT 是一款八进制缓冲器/线路驱动器，具备三态输出功能，能够接受4.5V至5.5V的电源电压范围。这款器件是驱动总线或缓冲存储器地址寄存器的理想选择。其输入和输出分别位于封装的相对两侧，这样的布局使得印刷电路板的设计更为简便。输入端与TTL电压兼容，能够连接到双极输出和3.3V设备，同时该器件还能支持从3.3V到5V的电压转换。\n74LV541AT 配备了三态控制门，由一个低电平有效的双输入与门控制。OE1和OE2是两个输出使能输入，当OE1和OE2均为低电平时，数据可以从An输入端传输到Yn输出端。若OE1或OE2任一为高电平时，所有输出端将进入高阻抗状态。\n该器件非常适合 • 电源电压范围：4.5V 至 5.5V\n• 输入接受高于电源电压且最高可达 5.5V 的电压\n• +16mA/-16mA 输出电流\n• 输入与 TTL 电压兼容\n• 所有端口均支持混合模式电压操作\n• 支持部分断电模式\n• -40℃ 至 +125℃ 工作温度范围\n• 采用绿色 TSSOP-20 和 TQFN-3.5×4.5-20AL 封装;

Octal buffer/line driver; 3-state

The 74LV541AT is an 8-bit buffer/line driver with 3-state outputs and TTL inputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the associated outputs to assume a high-impedance OFF-state.\n Designed to operate over a VCC range from 4.5 V to 5.5 V, the inputs are TTL • Direct interface with TTL levels\n• Supply voltage range from 4.5 V to 5.5 V\n• Typical tpd of 2.8 ns at 5 V\n• Typical VOL(p)< 0.8 V at VCC = 5 V, Tamb = 25 °C\n• Typical VOH(v)> 2.3 V at VCC = 5 V, Tamb = 25 °C\n• Supports mixed-mode voltage operation on all ports\n• IOFF circuitry provides part;

Octal buffer/line driver; 3-state

文件：737.65 Kbytes Page：14 Pages

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BUF NON-INVERT 5.5V 20TSSOP 集成电路（IC） 缓冲器，驱动器，接收器，收发器

Octal buffer/line driver; 3-state

文件：733.39 Kbytes Page：13 Pages

Octal buffer/line driver; 3-state

文件：733.39 Kbytes Page：13 Pages

封装/外壳：20-TSSOP（0.173"，4.40mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BUF NON-INVERT 5.5V 20TSSOP 集成电路（IC） 缓冲器，驱动器，接收器，收发器

Octal buffer/line driver 3-State

DESCRIPTION The 74LV541 is a low–voltage CMOS device and is pin and function compatible with 74HC/HCT541. FEATURES • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VOLP (output ground bounce)

Octal buffer/line driver 3-State

DESCRIPTION The 74LV541 is a low–voltage CMOS device and is pin and function compatible with 74HC/HCT541. FEATURES • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VOLP (output ground bounce)

Octal buffer/line driver 3-State

DESCRIPTION The 74LV541 is a low–voltage CMOS device and is pin and function compatible with 74HC/HCT541. FEATURES • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VOLP (output ground bounce)

Octal buffer/line driver 3-State

DESCRIPTION The 74LV541 is a low–voltage CMOS device and is pin and function compatible with 74HC/HCT541. FEATURES • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VOLP (output ground bounce)

Octal buffer/line driver 3-State

DESCRIPTION The 74LV541 is a low–voltage CMOS device and is pin and function compatible with 74HC/HCT541. FEATURES • Optimized for Low Voltage applications: 1.0 to 3.6V • Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V • Typical VOLP (output ground bounce)