14-stage binary ripple counter with oscillator

GENERAL DESCRIPTION The 74HC/HCT4060 are high-speed Si-gate CMOS devices and are pin compatible with “4060” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4060 are 14-stage ripple-carry counter/dividers and oscillators with three oscillator termin

14-stage binary ripple counter with oscillator

High Speed CMOS Logic

Features Output Drive Capability: 10 LSTTL Loads Low Input Current: 1μA Outputs directly interface CMOS, NMOS and TTL Operating Voltage Range: 2V to 6V CMOS High Noise Immunity Function compatible with CD4060B.

14-stage binary counter/oscillator

Description The M74HC4060 device is a high speed CMOS 14-stage binary counter/oscillator fabricated with silicon gate C2MOS technology. Features • High speed: fmax = 65 MHz (typ.) at VCC = 6 V • Low power dissipation: ICC = 4 A (max.) at TA = 25 °C • High noise immunity: V

14-stage binary ripple counter with oscillator

1. General description The 74HC4060; 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configuration allo

High Speed CMOS Logic

Features Output Drive Capability: 10 LSTTL Loads Low Input Current: 1μA Outputs directly interface CMOS, NMOS and TTL Operating Voltage Range: 2V to 6V CMOS High Noise Immunity Function compatible with CD4060B.

14-stage binary ripple counter with oscillator

1. General description The 74HC4060; 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configuration allo

14-stage binary ripple counter with oscillator

14-stage binary ripple counter with oscillator

14-stage binary ripple counter with oscillator

1. General description The 74HC4060-Q100; 74HCT4060-Q100 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configur

14-stage binary ripple counter with oscillator

1. General description The 74HC4060; 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configuration allo

14-stage binary ripple counter with oscillator

14-stage binary ripple counter with oscillator

GENERAL DESCRIPTION The 74HC/HCT4060 are high-speed Si-gate CMOS devices and are pin compatible with “4060” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4060 are 14-stage ripple-carry counter/dividers and oscillators with three oscillator termin

14-stage binary ripple counter with oscillator

GENERAL DESCRIPTION The 74HC/HCT4060 are high-speed Si-gate CMOS devices and are pin compatible with “4060” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4060 are 14-stage ripple-carry counter/dividers and oscillators with three oscillator termin

14-stage binary ripple counter with oscillator

14-stage binary ripple counter with oscillator

14-stage binary ripple counter with oscillator

1. General description The 74HC4060-Q100; 74HCT4060-Q100 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configur

14-stage binary ripple counter with oscillator

14-stage binary ripple counter with oscillator

GENERAL DESCRIPTION The 74HC/HCT4060 are high-speed Si-gate CMOS devices and are pin compatible with “4060” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4060 are 14-stage ripple-carry counter/dividers and oscillators with three oscillator termin

14-stage binary ripple counter with oscillator

GENERAL DESCRIPTION The 74HC/HCT4060 are high-speed Si-gate CMOS devices and are pin compatible with “4060” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4060 are 14-stage ripple-carry counter/dividers and oscillators with three oscillator termin

14-stage binary ripple counter with oscillator

14-stage binary ripple counter with oscillator

1. General description The 74HC4060; 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configuration allo

14-stage binary ripple counter with oscillator

1. General description The 74HC4060-Q100; 74HCT4060-Q100 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configur

14-stage binary ripple counter with oscillator

14-stage binary ripple counter with oscillator

14-stage binary ripple counter with oscillator

1. General description The 74HC4060-Q100; 74HCT4060-Q100 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configur

14-stage binary counter/oscillator

Description The M74HC4060 device is a high speed CMOS 14-stage binary counter/oscillator fabricated with silicon gate C2MOS technology. Features • High speed: fmax = 65 MHz (typ.) at VCC = 6 V • Low power dissipation: ICC = 4 A (max.) at TA = 25 °C • High noise immunity: V

Quad single-pole single-throw analog switch

Quad single-pole single-throw analog switch

Quad bilateral switches

GENERAL DESCRIPTION The 74HC4066 and 74HCT4066 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4066B. They are specified in compliance with JEDEC standard no. 7A. The 74HC4066 and 74HCT4066 have four independent analog switches. Each switch has two input/output pins (pins n

Quad single-pole single-throw analog switch

1. General description The 74HC4066; 74HCT4066 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use

Quad single-pole single-throw analog switch

1. General description The 74HC4066; 74HCT4066 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use

Quad single-pole single-throw analog switch

Quad single-pole single-throw analog switch

Quad single-pole single-throw analog switch

1. General description The 74HC4066-Q100; 74HCT4066-Q100 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enable

Quad single-pole single-throw analog switch

1. General description The 74HC4066; 74HCT4066 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use

Quad single-pole single-throw analog switch

Quad single-pole single-throw analog switch

Quad bilateral switches

GENERAL DESCRIPTION The 74HC4066 and 74HCT4066 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4066B. They are specified in compliance with JEDEC standard no. 7A. The 74HC4066 and 74HCT4066 have four independent analog switches. Each switch has two input/output pins (pins n

CMOS Digital Integrated Circuits Silicon Monolithic

Functional Description • Quad Bilateral Switch General The 74HC4066D is high-speed CMOS QUAD BILATERAL SWITCH fabricated with silicon gate C2MOS technology. It consists of four independent high speed switches capable of controlling either digital or analog signals while maintaining the CMOS

Quad single-pole single-throw analog switch

Quad single-pole single-throw analog switch

Quad single-pole single-throw analog switch

1. General description The 74HC4066-Q100; 74HCT4066-Q100 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enable

CMOS Digital Integrated Circuits Silicon Monolithic

Functional Description • Quad Bilateral Switch General The 74HC4066FT is a high speed CMOS QUAD BILATERAL SWITCH fabricated with silicon gate CMOS technology. It consists of four independent high speed switches capable of controlling either digital or analog signals while maintaining the CM

Quad bilateral switches

GENERAL DESCRIPTION The 74HC4066 and 74HCT4066 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4066B. They are specified in compliance with JEDEC standard no. 7A. The 74HC4066 and 74HCT4066 have four independent analog switches. Each switch has two input/output pins (pins n

Quad single-pole single-throw analog switch

Quad single-pole single-throw analog switch

Quad single-pole single-throw analog switch

Quad single-pole single-throw analog switch

Quad bilateral switches

GENERAL DESCRIPTION The 74HC4066 and 74HCT4066 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4066B. They are specified in compliance with JEDEC standard no. 7A. The 74HC4066 and 74HCT4066 have four independent analog switches. Each switch has two input/output pins (pins n

Quad single-pole single-throw analog switch

1. General description The 74HC4066; 74HCT4066 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use

Quad single-pole single-throw analog switch

1. General description The 74HC4066-Q100; 74HCT4066-Q100 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enable

Quad single-pole single-throw analog switch

1. General description The 74HC4066-Q100; 74HCT4066-Q100 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enable

16-channel analog multiplexer/demultiplexer

GENERAL DESCRIPTION The 74HC/HCT4067 are high-speed Si-gate CMOS devices and are pin compatible with the “4067” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4067 are 16-channel analog multiplexers/demultiplexers with four address inputs (S0 to S

16-channel analog multiplexer/demultiplexer

16-channel analog multiplexer/demultiplexer

16-channel analog multiplexer/demultiplexer

16-channel analog multiplexer/demultiplexer

16-channel analog multiplexer/demultiplexer

1. General description The 74HC4067-Q100; 74HCT4067-Q100 is a single-pole 16-throw analog switch (SP16T) suitable for use in analog or digital 16:1 multiplexer/demultiplexer applications. The switch features four digital select inputs (S0, S1, S2 and S3), sixteen independent inputs/outputs (Yn)

16-channel analog multiplexer/demultiplexer