Quad bilateral switches

GENERAL DESCRIPTION The 74HC/HCT4016 are high-speed Si-gate CMOS devices and are pin compatible with the “4016” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4016 have four independent analog switches (transmission gates). FEATURES •

Quad single-pole single-throw analog switch

1. General description The 74HC4016 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of current

Quad single-pole single-throw analog switch

The 74HC4016 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interf • Input levels nE inputs:• For 74HC4016: CMOS level\n\n• Typical ‘break before make’ built-in\n• Low 'ON' resistance:• 160 Ω (typical) at VCC = 4.5 V\n• 120 Ω (typical) at VCC = 6.0 V\n• 80 Ω (typical) at VCC = 9.0 V\n\n• Specified in compliance with JEDEC standard no. 7A\n• ESD protection:• HBM JES;

Quad bilateral switches

GENERAL DESCRIPTION The 74HC/HCT4016 are high-speed Si-gate CMOS devices and are pin compatible with the “4016” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4016 have four independent analog switches (transmission gates). FEATURES •

Quad bilateral switches

GENERAL DESCRIPTION The 74HC/HCT4016 are high-speed Si-gate CMOS devices and are pin compatible with the “4016” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4016 have four independent analog switches (transmission gates). FEATURES •

Quad bilateral switches

GENERAL DESCRIPTION The 74HC/HCT4016 are high-speed Si-gate CMOS devices and are pin compatible with the “4016” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4016 have four independent analog switches (transmission gates). FEATURES •

Quad Analog Switch/ Multiplexer/Demultiplexer

文件：349.78 Kbytes Page：11 Pages

Quad Analog Switch/ Multiplexer/Demultiplexer

文件：349.78 Kbytes Page：11 Pages

Quad Analog Switch/ Multiplexer/Demultiplexer

文件：349.78 Kbytes Page：11 Pages