High–Performance Silicon–Gate CMOS

• Output Drive Capability: 15 LSTTL Loads • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 2 to 6 V • Low Input Current: 1 mA • High Noise Immunity Characteristic of CMOS Devices • In Compliance with the Requirements Defined by JEDEC Standard No. 7A • Chip Comp

Octal bus transceiver; 3-state

1. General description The 74HC245; 74HCT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the

Octal bus transceiver; 3-state

GENERAL DESCRIPTIONS The 74HC/HCT245 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Octal bidirectional bus interface • Non-inverting 3-state outputs • Output c

Octal 3?뭆tate Noninverting Bus Transceiver

Octal 3−State Noninverting Bus Transceiver High−Performance Silicon−Gate CMOS The 74HC245 is identical in pinout to the LS245. The device inputs are compatible with standard CMOS outputs; with pull−up resistors, they are compatible with LSTTL outputs. The HC245 is a 3−state noninverting transce

8bit CMOS

文件：326.97 Kbytes Page：8 Pages

OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

文件：261.17 Kbytes Page：6 Pages

Octal 3-STATE Transceiver

General Description The MM74HC245A 3-STATE bidirectional buffer utilizes advanced silicon-gate CMOS technology, and is intended for two-way asynchronous communication between data buses. It has high drive current outputs which enable high speed operation even when driving large bus capacitances