丝印代码：74HC126；Quad bus buffer (3-state)

Features • High-speed: tPD = 8 ns (typ.) at VCC = 6 V • Low power dissipation: ICC = 4 μA (max.) at TA = 25 °C • High noise immunity: VNIH = VNIL = 28 % VCC (min) • Symmetrical output impedance: |IOH| = IOL = 6 mA (min.) • Balanced propagation delays: tPLH ≅ tPHL • Wide operating vo

Quad buffer/line driver; 3-state

1. General description The 74HC126; 74HCT126 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A LOW on nOE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to i

Standard-logic

The 74HC126 provides provides four independent buffer gates with\n3-state outputs. Each buffer has a separate enable pin that if driven\nwith a low logic level places the corresponding output in the high\nimpedance state. The device is designed for operation with a power\nsupply range of 2.0V to 6.0

Quad buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT126 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Output capability: bus driver • ICCcategory: MSI

QUADRUPLE 3-STATE BUFFERS OE HIGH

文件：312.14 Kbytes Page：9 Pages

QUAD BUS BUFFERS (3-STATE)

丝印代码：74HC126D；CMOS Digital Integrated Circuits Silicon Monolithic

Functional Description • Quad Bus Buffer, Non-Inverted 3-State Outputs 74HC125D: Quad Bus Buffer 74HC126D: Quad Bus Buffer General The 74HC125D,74HC126D are high speed CMOS QUAD BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equiv

丝印代码：74HC126Y；Quad bus buffer (3-state)

Features • High-speed: tPD = 8 ns (typ.) at VCC = 6 V • Low power dissipation: ICC = 4 μA (max.) at TA = 25 °C • High noise immunity: VNIH = VNIL = 28 % VCC (min) • Symmetrical output impedance: |IOH| = IOL = 6 mA (min.) • Balanced propagation delays: tPLH ≅ tPHL • Wide operating vo

Quad buffer/line driver; 3-state

The 74HC126; 74HCT126 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A LOW on nOE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages • Inverting outputs\n• Complies with JEDEC standard no. 7A\n• Input levels:• For 74HC126: CMOS level\n• For 74HCT126: TTL level\n\n• ESD protection:• HBM JESD22-A114F exceeds 2000 V\n• MM JESD22-A115-A exceeds 200 V\n\n• Multiple package options\n• Specified from -40 °C to +85 °C and -40 °C to +125 ;

Quad buffer/line driver; 3-state

1. General description The 74HC126; 74HCT126 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A LOW on nOE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to i

Quad buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT126 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Output capability: bus driver • ICCcategory: MSI

Quad buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT126 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Output capability: bus driver • ICCcategory: MSI

Quad buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT126 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Output capability: bus driver • ICCcategory: MSI

Quad buffer/line driver; 3-state

GENERAL DESCRIPTION The 74HC/HCT126 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. FEATURES • Output capability: bus driver • ICCcategory: MSI

Quad buffer/line driver; 3-state

1. General description The 74HC126; 74HCT126 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A LOW on nOE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to i

封装/外壳：14-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BUFFER NON-INVERT 6V 14SO 集成电路（IC） 缓冲器，驱动器，接收器，收发器

封装/外壳：14-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC BUFFER NON-INVERT 6V 14SO 集成电路（IC） 缓冲器，驱动器，接收器，收发器

Quad buffer/line driver; 3-state

文件：702.64 Kbytes Page：15 Pages

Quad buffer/line driver; 3-state

文件：702.64 Kbytes Page：15 Pages

Quad buffer/line driver; 3-state

文件：702.64 Kbytes Page：15 Pages

QUADRUPLE 3-STATE BUFFERS OE HIGH

文件：312.14 Kbytes Page：9 Pages

QUADRUPLE 3-STATE BUFFERS OE HIGH

文件：312.14 Kbytes Page：9 Pages

QUADRUPLE 3-STATE BUFFERS OE HIGH

文件：312.14 Kbytes Page：9 Pages

QUADRUPLE 3-STATE BUFFERS OE HIGH

文件：312.14 Kbytes Page：9 Pages

Quad 3-State Noninverting Buffers

The MC74HC125A and MC74HC126A are identical in pinout to the LS125 and LS126. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. The HC125A and HC126A noninverting buffers are designed to be used with 3–state memory address

Quad 3-State Noninverting Buffers

The MC74HC125A and MC74HC126A are identical in pinout to the LS125 and LS126. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. The HC125A and HC126A noninverting buffers are designed to be used with 3–state memory address

Quad 3-State Noninverting Buffers

The MC74HC125A and MC74HC126A are identical in pinout to the LS125 and LS126. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. The HC125A and HC126A noninverting buffers are designed to be used with 3–state memory address