Octal D-Type Flip-Flop with 3-STATE Outputs

General Description The AC/ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D-type inputs is stored in the flip-flops on the LOW-to-HIGH Clock (CP) transition. The AC/ACT574 is functiona

Octal D-Type Flip-Flop with 3-STATE Outputs

General Description The AC/ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D-type inputs is stored in the flip-flops on the LOW-to-HIGH Clock (CP) transition. The AC/ACT574 is functiona

封装/外壳：20-SOIC（0.295"，7.50mm 宽） 功能：标准 包装：袋 描述：IC FF D-TYPE SNGL 8BIT 20SOIC 集成电路（IC） 触发器

Octal D-Type Flip-Flop with 3-STATE Outputs

文件：115.26 Kbytes Page：9 Pages

IC FF D-TYPE SNGL 8BIT 20SOIC

IC FF D-TYPE SNGL 8BIT 20SOIC

封装/外壳：20-SOIC（0.295"，7.50mm 宽） 功能：标准 包装：卷带（TR） 描述：IC FF D-TYPE SNGL 8BIT 20SOIC 集成电路（IC） 触发器

OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING

DESCRIPTION The ACT574 is an advanced high-speed CMOS OCTAL D-TYPE FLIP FLOP with 3 STATE OUTPUT NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. ■ HIGH SPEED: fMAX = 250 MHz (TYP.) at VCC =3.3V ■ LOW POWER DISSIPATION: ICC =8 µA (MAX.) at TA

OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING

DESCRIPTION The ACT574 is an advanced high-speed CMOS OCTAL D-TYPE FLIP FLOP with 3 STATE OUTPUT NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. ■ HIGH SPEED: fMAX = 250 MHz (TYP.) at VCC =3.3V ■ LOW POWER DISSIPATION: ICC =8 µA (MAX.) at TA

OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING

DESCRIPTION The ACT574 is an advanced high-speed CMOS OCTAL D-TYPE FLIP FLOP with 3 STATE OUTPUT NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. ■ HIGH SPEED: fMAX = 250 MHz (TYP.) at VCC =3.3V ■ LOW POWER DISSIPATION: ICC =8 µA (MAX.) at TA

OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING

DESCRIPTION The ACT574 is an advanced high-speed CMOS OCTAL D-TYPE FLIP FLOP with 3 STATE OUTPUT NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. ■ HIGH SPEED: fMAX = 250 MHz (TYP.) at VCC =3.3V ■ LOW POWER DISSIPATION: ICC =8 µA (MAX.) at TA

OCTAL D-TYPE FLIP-FLOPS, 3-STATE POSITIVE-EDGE-TRIGGERED

文件：246.79 Kbytes Page：8 Pages