Low Profile PCI Express 2-Port RS-232 Serial Interface

Features • Compliant with RoHS and WEEE directives • Ultra high-speed UART with 256-byte Tx and Rx FIFOs • Supports asynchronous data rates exceeding 1 Mbps • Bus-derived 125 MHz BRG and clock prescalar support wide range of baud rates • All RS-232 modem control signals implemented • PCI Ex

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

14 GHz, 600 W CW, PPM FOCUSING, HIGH POWER GAIN

GENERAL DESCRIPTION NEC LD7202 series of PPM-focused traveling wave tubes are designed for use as final amplifiers tube in the earth-to-satellite communications transmitter. These are capable of delivering an output power of 600W over the range of 12.75 to 14.5 GHz and provide a high power gain

256 x 9, 512 x 9, 1K x 9 CMOS FIFO

Descriptions The MS7200L/7201AL/7202AL are dual-port static RAM based CMOS First-In/First-Out (FIFO) memories organized in nine-bit wide words. The devices are configured so that data is read out in the same sequential order that it was written in. Additional expansion logic is provided to allow