UHF Tag

Features ■EEPROM, memory 138 byte ■Extended usable TID memory: 14 byte ■Not for direct mounting on metal Functional principle The UHF read/write heads form an air interface the size of which may vary, depending on the combination of read/write head and tag. The read/write distances ment

HF Tag

Features ■FRAM memory 2 kB ■Not for direct mounting on metal Functional principle The HF read/write devices operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and tag used. The read/write di

HF Read/Write Head – Integrated-Interface Multiprotocol Ethernet

Features ■Commissioning support through graphical display of the RSSI value and the detuning caused by metal in TAS (Turck Automation Suite, available free of charge at www.turck.com) ■PROFINET device, EtherNet/IP device or Modbus TCP slave ■PROFINET S2 system redundancy ■Integrated Ether

HF Read/Write Head – For Bus Line Topology with TBEN-*

Features ■M12 × 1 threaded barrel ■Long version ■Chrome-plated brass ■Device without end termination ■Device may only be operated in line topology TBEN-S*-2RFID-* or TBENL*-4RFID-* ■Max. 32 nodes per line or connection permitted ■Use a corresponding terminating resistor (see accessories)

HF Read/Write Head

Features ■M12 × 1 threaded barrel ■Long version ■Chrome-plated brass ■Powered and operated only via connection to BL ident interface module ■M12 × 1 connector, connection only via BL ident extension cable Functional principle The HF read/write devices operating at a frequency of 13.56

HF Read/Write Head – For Bus Line Topology with TBEN-*

Features ■M12 × 1 threaded barrel ■Chrome-plated brass ■Device without end termination ■Device may only be operated in line topology TBEN-S*-2RFID-* or TBENL*-4RFID-* ■Max. 32 nodes per line or connection permitted ■Use a corresponding terminating resistor (see accessories) ■Observe the

HF Read/Write Head

Features ■M12 × 1 threaded barrel ■Chrome-plated brass ■Powered and operated only via connection to BL ident interface module ■M12 × 1 connector, connection only via BL ident extension cable Functional principle The HF read/write devices operating at a frequency of 13.56 MHz form a tran

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head IO-Link

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head IO-Link

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The UHF read/write heads form a transmission zone, the size of which may vary depending on the combination of read/write head and tag used. The read/write distances only represent standard values measured under laboratory conditions, free from any influences caused by surro

Read/write Head

Functional principle The HF read/write heads operating at a frequency of 13.56 MHz form a transmission zone the size of which (0…500 mm) varies, depending on the combination of read/write head and data carrier. The read/write distances mentioned here only represent standard values measured un

Read/write Head

Functional principle The UHF read/write heads form a transmission zone, the size of which may vary depending on the combination of read/write head and tag used. The read/write distances only represent standard values measured under laboratory conditions, free from any influences caused by surro

UHF Tag

Features ■EEPROM, memory 112 byte ■TID serial number: 8 byte ■Not for direct mounting on metal Functional principle The UHF read/write heads form an air interface the size of which may vary, depending on the combination of read/write head and tag. The read/write distances mentioned here

UHF Tag

Features ■For outdoor use ■EEPROM, memory 112 byte ■TID memory: 12 byte ■For direct mounting on metal Functional principle The UHF read/write heads form an air interface the size of which may vary, depending on the combination of read/write head and tag. The read/write distances mentio

Read/write Head

Functional principle The UHF read/write heads form a transmission zone, the size of which may vary depending on the combination of read/write head and tag used. The read/write distances only represent standard values measured under laboratory conditions, free from any influences caused by surro

欠压脱扣器

温度控制器

温度控制器