PISTON SEALS

DESCRIPTION The BECA 580 - 581 profiles are U-ring type piston seals with offset rubber lips. APPLICATIONS Material handling - Lifting Presses Hydraulic cylinders

包装：散装 描述：CONN PLUG MONO 6.35MM 2COND 连接器，互连器件 音频连接器

包装：散装 描述：CONN RCA JACK MONO 3.2MM PNL MT 连接器，互连器件 音频连接器

Clipped Sine Wave

文件：134.9 Kbytes Page：2 Pages

Channel style heat sink with folded back fins

Channel style heat sink with folded back fins for increased cooling surface area. Available with tin plated solderable tabs for easy attachment to the printed circuit card.

Channel style heat sink with folded back fins

Channel style heat sink with folded back fins for increased cooling surface area. Available with tin plated solderable tabs for easy attachment to the printed circuit card.

BiMOS II 10-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS WITH ACTIVE-DMOS PULL-DOWNS

The UCN5810AF, UCN5810EPF, and UCN5810LWF combine a 10-bit CMOS shift register and accompanying data latches, control circuitry, bipolar sourcing outputs with DMOS active pull-downs. Designed primarily to drive vacuum-fluorescent displays, the 60 V and -40 mA output ratings also allow these device

BiMOS II 12-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS

Designed primarily for use with vacuum-fluorescent displays, the UCN5811A smart power BiMOS II driver features low-output saturation voltages and high output switching speed. These devices contain CMOS shift registers, data latches, and control circuitry, and bipolar high-speed sourcing outputs wi

Channel style heat sink with folded back fins

Channel style heat sink with folded back fins for increased cooling surface area. Available with tin plated solderable tabs for easy attachment to the printed circuit card.

Channel style heat sink with folded back fins

Channel style heat sink with folded back fins for increased cooling surface area. Available with tin plated solderable tabs for easy attachment to the printed circuit card.

BiMOS II 20-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS WITH ACTIVE-DMOS PULL-DOWNS

The UCN5812AF/EPF combine a 20-bit CMOS shift register, data latches, and control circuitry with high-voltage bipolar source drivers and active DMOS pull-downs for reduced supply current requirements. Although designed primarily for vacuum-fluorescent displays, the high-voltage, highcurrent output

Customer Specification

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer Specifications

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer SpecificationS

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer SpecificationS

Construction Diameters (In) 1) Component 1 15 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 6 BLUE 11 PINK 2 WHITE 7 ORANGE 12 TAN 3 RED 8 YELLOW 13 WH

Customer Specification

Construction Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Diameters (In) 1) Component 1 25 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Col

Customer SpecificationS

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer Specification

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer Specifications

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer Specifications

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer SpecificationS

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer SpecificationS

Construction Diameters (In) 1) Component 1 15 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 6 BLUE 11 PINK 2 WHITE 7 ORANGE 12 TAN 3 RED 8 YELLOW 13 WH

Channel style heat sink with folded back fins

Channel style heat sink with folded back fins for increased cooling surface area. Available with tin plated solderable tabs for easy attachment to the printed circuit card.

Customer Specification

Construction Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Diameters (In) 1) Component 1 25 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Col

Channel style heat sink with folded back fins

Channel style heat sink with folded back fins for increased cooling surface area. Available with tin plated solderable tabs for easy attachment to the printed circuit card.

Customer Specification

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer Specifications

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer SpecificationS

Construction Diameters (In) 1) Component 1 12 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 5 BROWN 9 VIOLET 2 WHITE 6 BLUE 10 SLATE 3 RED 7 ORANGE 11

Customer SpecificationS

Construction Diameters (In) 1) Component 1 15 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Color Code D2 Cond Color Cond Color Cond Color 1 BLACK 6 BLUE 11 PINK 2 WHITE 7 ORANGE 12 TAN 3 RED 8 YELLOW 13 WH

Customer Specification

Construction Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Diameters (In) 1) Component 1 25 X 1 COND a) Conductor 22 (7/30) AWG BC 0.030 b) Insulation 0.008 Wall, Nom. PVC, Plenum Rated 0.046 (1) Color Code Alpha Wire Col

BiMOS II 20-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS WITH ACTIVE-DMOS PULL-DOWNS

The UCN5812AF/EPF combine a 20-bit CMOS shift register, data latches, and control circuitry with high-voltage bipolar source drivers and active DMOS pull-downs for reduced supply current requirements. Although designed primarily for vacuum-fluorescent displays, the high-voltage, highcurrent output

BiMOS II 20-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS FOR -40 Degrees Celcious TO 85 Degrees Celcious OPERATION

The UCN5812AF/EPF combine a 20-bit CMOS shift register, data latches, and control circuitry with high-voltage bipolar source drivers and active DMOS pull-downs for reduced supply current requirements. Although designed primarily for vacuum-fluorescent displays, the high-voltage, highcurrent output

N-Channel Enhancement Mode Power MOSFET

General Description The 5814 is the highest performance trench N-ch MOSFET with extreme high cell density,which provide excellent RDSON and gate chargens for most of the synchronous buck converter applications . The 5814 meet the RoHS and Green Product requirement,100 EAS guaranteed with f

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS, metric knock-outs

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS, metric knock-outs

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS, metric knock-outs

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS, metric knock-outs

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges.

Enclosure, ABS, metric knock-outs

Base with PUR gasket and screws for mounting plate/DIN-rail. cover with polyamide cover screws and plastic hinges

BiMOS II 8-BIT LATCHED SOURCE DRIVERS

Designed primarily for use with high-voltage vacuum-fluorescent displays, the UCN5815A and UCN5815EP BiMOS II integrated circuits consist of eight npn Darlington source drivers with output pull down resistors, a CMOS latch for each driver, and common STROBE, BLANKING, and ENABLE functions. BiMO

4-TO-16 LINE LATCHED DECODER/DRIVERS

4-TO-16 LINE LATCHED DECODER/DRIVERS The UCN5816A and UCN5816EP 4-to-16 line latched decoder/drivers combine low-power CMOS inputs and logic with 16 highcurrent, high-voltage bipolar outputs. The CMOS inputs cause minimal loading and are compatible with standard CMOS, PMOS, and NMOS logic. TTL or

ADDRESSABLE 28-LINE DECODER/DRIVER

ADDRESSABLE 28-LINE DECODER/DRIVER Intended for use in ink-jet printer applications, the A5817SEP addressable 28-line decoder/driver combines low-power CMOS inputs and logic with 28 high-current, high-voltage bipolar outputs. A 4-to-14 line decoder determines the selected output driver (n) in eac

ADDRESSABLE 28-LINE DECODER/DRIVER

FEATURES ■ Controlled Characteristics for Ink-Jet Printers ■ Addressable Data Entry ■ 30 V Minimum V(BR)CEX ■ CMOS, PMOS, NMOS Compatible Inputs ■ Low-Power CMOS Logic

738A ADEMCO™ INTERFACE

DESCRIPTION The 738A Ademco Interface Module allows you to interface Ademco 5881 wireless receivers with the XR150/XR550 Series and XT30/XT50 Series panels. See “Compatibility” for specific firmware levels. The module provides up to 32 supervised, programmable zones of Ademco wireless tr

1 Amp Schottky Rectifier

1 Amp Schottky Rectifier • Schottky Barrier Rectifier • Guard Ring Protection • Low Forward Voltage • High Reliability • High Current Capability

1 Amp Schottky Rectifier

1 Amp Schottky Rectifier • Schottky Barrier Rectifier • Guard Ring Protection • Low Forward Voltage • High Reliability • High Current Capability • Surface Mount Package

1 Amp Schottky Rectifier

1 Amp Schottky Rectifier • Underwriters Laboratory Flammability Class 94V-0 • Schottky Barrier Rectifier • Guard ring protection • Low forward voltage • Low thermal resistance rating

BiMOS II 32-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS FOR -40 C TO 85 C OPERATION

BiMOS II 32-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS FOR -40°C TO +85°C OPERATION Designed primarily for use with vacuum-fluorescent displays, the UCQ5818AF and UCQ5818EPF smart power BiMOS II drivers combine CMOS shift registers, data latches, and control circuitry, with bipolar highspeed sourci

BiMOS II 32-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS WITH ACTIVE-DMOS PULL-DOWNS

Designed primarily for use with vacuum-fluorescent displays, the UCN5818AF and UCN5818EPF smart power BiMOS II drivers combine CMOS shift registers, data latches, and control circuitry, with bipolar highspeed sourcing outputs and DMOS active pull-down circuitry. The highspeed shift register and da