SHIELDED SMT POWER INDUCTORS

● FEATURE Various high power inductor are Superior to be high saturation for surface mounting ● APPLICATIONS 2 DC/DC converter power supply, Telecommunication equipment

Pentium 4 Processors Supporting Hyper-Threading Technology

Introduction The Intel® Pentium® 4 processor on 90 nm process in the 775-land package is a follow on to the Pentium 4 processor in the 478-pin package with enhancements to the Intel NetBurst® microarchitecture. The Pentium 4 processor on 90 nm process in the 775-land package uses FlipChip Land Gr

POWER INDUCTOR

●FEATURE 1. Excellent solder heat resistance(add “C” is for high current type) 2. Low voltage drops and small variations inductance ●APPLICATION 1. DC power supply circuits 2. Power line choke coils…etc

WIRE WOUND SMD INDUCTOR

●FEATURE 1. Low core loss for high frequency power application 2. Large terminal surface ●APPLICATION 1. Portable communication equipment, notebook computer

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

Audio Broadcast Quality

Features Rugged black epoxy potted case with 9 pin connections (.025 square by 0.5 long). Frequency response minimum @ 0 dbm +/- 1 db max. (+/- 0.5 db is typical) of 30 Hz. to30 Khz., except 560Q which is 30 Hz. to 15 Khz. - see data sheets below for more detail. Higher signal levels possible w

ELECTRONIC BREAKERLESS CONVERSION KIT

文件：95.62 Kbytes Page：4 Pages

SUBMINIATURE FUSEHOLDERS

文件：117.72 Kbytes Page：1 Pages

HCMOS / TTL

文件：134.16 Kbytes Page：2 Pages

包装：散装 描述：FISHPAPER FYBER 10X24\ 原型开发，制造品 配件

包装：盒 描述：RUGGED METAL PUSHBUTTON 开关 按钮开关

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

PISTON SEALS

DESCRIPTION The BECA 560 profile is a highperforming, double acting compact piston seal composed of a flexible rubber ring and two POM back-up rings as standard. APPLICATIONS Agriculture Mobile machinery Hydraulic cylinders

10A Current Sensing Transformers

RoHS compliant 50, 100, 200 & 300 turn variants Primary current rating 10A 20kHz-200kHz frequency range Centre tapped variants available

Introduction to Knowles Precision Devices

Applications  RF amplifier  LC Filters and Networks  Broadband Wireless LAN  Medical Devices  Cordless and Cellular phones  DR/Crystal Oscillator  Microstrip line filters

SILVYN® KLICK 90° PG

Technical Features: Connecting thread PG 9 up to PG 48 acc. to EN 40430 Nominal wide NW 13 up to NW 54,5 Protection class IP68 acc. to EN 60529 IP69K acc. to DIN 40050 T.9 Depending on the used conduit Temperature range -40°C up to +115°C

SILVYN® KLICK 90° PG

Technical Features: Connecting thread PG 9 up to PG 48 acc. to EN 40430 Nominal wide NW 13 up to NW 54,5 Protection class IP68 acc. to EN 60529 IP69K acc. to DIN 40050 T.9 Depending on the used conduit Temperature range -40°C up to +115°C

SILVYN® KLICK-Y (TPE)

Feature: Rational tubing assembly Assembled by just putting on

SILVYN® KLICK-Y (TPE)

Feature: Rational tubing assembly Assembled by just putting on

SILVYN® KLICK-Y (TPE)

Feature: Rational tubing assembly Assembled by just putting on

SILVYN® KLICK-Y (TPE)

Feature: Rational tubing assembly Assembled by just putting on

SILVYN® KLICK-Y (TPE)

Feature: Rational tubing assembly Assembled by just putting on

SILVYN® KLICK-Y (TPE)

Feature: Rational tubing assembly Assembled by just putting on

SILVYN® KLICK-Y (TPE)

Feature: Rational tubing assembly Assembled by just putting on

SILVYN® KLICK-Y (TPE)

Feature: Rational tubing assembly Assembled by just putting on

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series,IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available

560 Series IP67 | E-Seal | In-Line Waterproof Connectors | 2.50mm Pitch | Double Latch

Features 2.5mm Pitch, Rated Current: 3A max Fully Waterproof with Double Latch Solution Available in Wire-to-Wire and Wire-to-Board Options Seals Preassembled into Housing; No External Sealing Required available in 2, 3, or 5 Positions True Crimp and Poke Solution Waterproofing Cap available