Drywall Punch

文件：1.8415 Mbytes Page：16 Pages

包装：散装 描述：2.54MM 0.1 PITCH 9-PIN JUMPER CA 电缆组件 矩形电缆组件

包装：散装 描述：CONN ADAPT JACK-JACK TNC 50 OHM 连接器，互连器件 同轴连接器（RF）适配器

矩形电缆组件

Presence and motion detectors Ceiling installation indoor

Description - 1-way DALI-2 switching actuator flush-mounted - For the control of loads with 230 V AC mains voltage such as lamps, fans, pumps, etc. - Additionally suitable for applications with extra-low voltage or control of a higher-level control system (HVAC), etc. - Compact relay module fo

Presence and motion detectors Ceiling installation indoor

Description - Passive infra-red presence detector for flush-mounted ceiling installation, DALI-2 certified - Rectangular detection area 360°, 30 x 4,5 m, (135 m2) at mounting height 3 m, for corridors and storage areas, with 2 individually connectable and disconnectable detection zones - 2 chan

Presence and motion detectors Ceiling installation indoor

Description - Passive infra-red presence detector for flush-mounted ceiling installation, DALI-2 certified - Circular detection area 360°, Ø 24 m, (452 m2) at mounting height 3 m - 1 chanel light DALI-2 in broadcast mode - DALI-2 technology according to IEC 62386 Parts 101 and 103 - 1 push-bu

Presence and motion detectors Ceiling installation indoor

Description - Passive infra-red presence detector for flush-mounted ceiling installation, DALI-2 certified - Circular detection area 360°, Ø 24 m, (452 m2) at mounting height 3 m - 1 chanel light DALI-2 in broadcast mode - DALI-2 technology according to IEC 62386 Parts 101 and 103 - 1 push-bu

Presence and motion detectors Ceiling installation indoor

Description - Passive infra-red presence detector for flush-mounted ceiling installation, DALI-2 certified - Circular detection area 360°, Ø 24 m, (452 m2) at mounting height 3 m - 3 channels light DALI-2 addressable - DALI-2 technology according to IEC 62386 Parts 101 and 103 - Flexible assi

Presence and motion detectors Ceiling installation indoor

Description - Passive infra-red presence detector for flush-mounted ceiling installation, DALI-2 certified - Rectangular detection area 360°, 30 x 4,5 m, (135 m2) at mounting height 3 m, for corridors and storage areas, with 2 individually connectable and disconnectable detection zones - 2 chan

Präsenzmelder & Bewegungsmelder Deckenmontage innen

Funktionsbeschreibung - Passiv-Infrarot-Präsenzmelder für Deckenmontage UP, DALI-2 zertifiziert - Runder Erfassungsbereich 360°, Ø 24 m, (452 m2) bei 3 m Montagehöhe - DALI-2 adressierbar bis zu 4 Kanäle Licht - Wertet die Informationen der DALI Taster-Schnittstellen aus und steuert die Aktore

Presence and motion detectors Ceiling installation indoor

Description - Passive infra-red presence detector for flush-mounted ceiling installation, DALI-2 certified - Circular detection area 360°, Ø 8 m, (50 m2) at mounting height 3 m - 1 chanel light DALI-2 in broadcast mode - DALI-2 technology according to IEC 62386 Parts 101 and 103 - 1 push-butt

Presence and motion detectors Ceiling installation indoor

Description - Passive infra-red presence detector for flush-mounted ceiling installation, DALI-2 certified - Circular detection area 360°, Ø 8 m, (50 m2) at mounting height 3 m - 1 chanel light DALI-2 in broadcast mode - DALI-2 technology according to IEC 62386 Parts 101 and 103 - 1 push-butt

KNX Actuators DIN rail and gateways

Description - 8-way switching or 4-way blind actuator FIX1 - Flexible channel function selection as switching actuator or for controlling drives for blinds,shutters, sun and vision protection devices, skylights and ventilation flaps - LED switching status display for each channel - Manual oper

KNX Actuators DIN rail and gateways

Description - 16-way switching or 8-way blind actuator FIX2 - Flexible channel function selection as switching actuator or for controlling drives for blinds,shutters, sun and vision protection devices, skylights and ventilation flaps - LED switching status display for each channel - Manual ope

KNX Actuators DIN rail and gateways

Description - 4-way C load switching actuator FIX1 - With current recognition - For higher lamp loads - LED switching status display for each channel - Manual operation on device (even without bus connection) - Adjustable characteristics: e.g. switching, delayed switching, pulse function -

KNX Actuators DIN rail and gateways

Description - 4-way high-performance switching actuator FIX1 - Bistable relays - Switching capacity 25 A - LED switching status display for each channel - Manual operation on device - Switching functions: On/Off, pulse, On/Off delay, staircase light with warning - Logical links: e.g. lock,

KNX Actuators DIN rail and gateways

Description - 8-way C load switching actuator FIX2 - With current recognition - For higher lamp loads - LED switching status display for each channel - Manual operation on device (even without bus connection) - Adjustable characteristics: e.g. switching, delayed switching, pulse function -

KNX Actuators DIN rail and gateways

Description - 8-way high-performance switching actuator FIX2 - Bistable relays - Switching capacity 25 A - LED switching status display for each channel - Manual operation on device - Switching functions: On/Off, pulse, On/Off delay, staircase light with warning - Logical links: e.g. lock,

KNX Actuators DIN rail and gateways

Description - 8-way switching actuator FIX1 - LED switching status display for each channel - Manual operation on device (even without bus connection) - Adjustable characteristics: e.g. switching, delayed switching, pulse function - Links, type of contact (NC contact/NO contact) and participa

KNX Actuators DIN rail and gateways

Description - 4-way switching actuator FIX1 - LED switching status display for each channel - Manual operation on device (even without bus connection) - Adjustable characteristics: e.g. switching, delayed switching, pulse function - Links, type of contact (NC contact/NO contact) and participa

KNX Actuators DIN rail and gateways

Description - 16-way switching actuator FIX2 - LED switching status display for each channel - Manual operation on device (even without bus connection) - Adjustable characteristics: e.g. switching, delayed switching, pulse function - Links, type of contact (NC contact/NO contact) and particip

KNX Binary inputs

Description - 6-way binary input FIX1 - 6 floating universal and wide-range voltage inputs (10-240 V AC/DC or internally generated auxiliary voltage of approx. 12 V DC) - 2 additional channels operable by buttons on the device, but without input - LED switching status display for each channel

KNX Binary inputs

Description - 12-way binary input FIX2 - 12 floating universal and wide-range voltage inputs (10-240 V AC/DC or internally generated auxiliary voltage of approx. 12 V DC) - 4 additional channels operable by buttons on the device, but without input - LED switching status display for each channe

KNX HVAC controller

Description - 6-way heating actuator FIX1 - With 6 temperature controllers (P/PI) for heating and cooling - For controlling thermal actuators 24 V - 240 V AC in 2 groups with 3 outputs and 450 mA each - (Due to the switch-on behaviour of the actuators, we recommend not to exceed a maximum load

KNX HVAC controller

Description - 12-way heating actuator FIX2 - With temperature controllers (P/PI) for heating and cooling - For controlling 12 thermal actuators 24 V - 240 V AC in 4 groups with 3 outputs and 450 mA each - (Due to the switch-on behaviour of the actuators, we recommend not to exceed a maximum lo

KNX Actuators DIN rail and gateways

Description - 4-way blind actuator FIX1 - For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps - Manual operation on device (even without bus connection) - LED Up and Down switching status display for each channel - Potential-free con

KNX Actuators DIN rail and gateways

Description - 8-way blind actuator FIX2 - For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps - Manual operation on device (even without bus connection) - LED Up and Down switching status display for each channel - Potential-free con

KNX Actuators DIN rail and gateways

Description - 4-way blind actuator 24V FIX1 - For controlling 24V drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps - Manual operation on device (even without bus connection) - LED Up and Down switching status display for each channel - Potential-

KNX Actuators DIN rail and gateways

Description - 8-way blind actuator 24V FIX2 - For controlling 24V drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps - Manual operation on device (even without bus connection) - LED Up and Down switching status display for each channel - Potential-

KNX Actuators DIN rail and gateways

Description - 2-way universal dimmer actuator FIX1 - For dimming dimmable LED, incandescent lamps, LV, HV halogen lamps and energy saving lamps - Also suitable for dimming of dimmable energy-saving lamps - Also suitable for controlling fans - LED switching status display for each channel - M

KNX Actuators DIN rail and gateways

Description - 4-way universal dimmer actuator FIX2 - For dimming dimmable LED, incandescent lamps, LV, HV halogen lamps and energy saving lamps - Also suitable for dimming of dimmable energy-saving lamps - Also suitable for controlling fans - LED switching status display for each channel - M

KNX Actuators DIN rail and gateways

Description - 4-way universal dimmer actuator FIX1 - For dimming dimmable LED, incandescent lamps, LV, HV halogen lamps and energy saving lamps - Also suitable for dimming of dimmable energy-saving lamps - Also suitable for controlling fans - LED switching status display for each channel - M

KNX Actuators DIN rail and gateways

Description - 8-way universal dimmer actuator FIX2 - For dimming dimmable LED, incandescent lamps, LV, HV halogen lamps and energy saving lamps - Also suitable for dimming of dimmable energy-saving lamps - Also suitable for controlling fans - LED switching status display for each channel - M

Computer Cable 6 POS MOD RET Cable

Product Description Computer Cable 6 POS MOD RET Cable

DALI DALI gateways and actuators

Description - 4-ways DALI actuator - DALI-2 certified - Interface between the DALI system and the KNX bus - 4 channels, broadcast communication - Control of up to 30 DALI devices per channel - Control of light colour and colour temperature according to EN 62386-209 (DT-8) - Simple commissio

DALI DALI gateways and actuators

Description - Interface between the DALI and the KNX system, DALI-2 certified - 1 channel for 64 DALI lights - A maximum of 64 DALI members can be connected to a DALI output - Control of DALI devices in 16 groups or in individual control (from firmware 0.3.x and ETS application V2) - Support

Computer Cable 6 POS MOD RET Cable

Product Description Computer Cable 6 POS MOD RET Cable

DALI DALI gateways and actuators

Description - Interface between the DALI and the KNX system, DALI-2 certified - 2 channels for 2x64 DALI lights - A maximum of 64 DALI members can be connected to a DALI output - Control of DALI devices in 16 groups or in individual control (from firmware 0.3.x and ETS application V2) - Suppo

DALI DALI gateways and actuators

Description - Multi-Master Application Controller as interface between the DALI system and the KNX bus - DALI-2 certified - Secure commissioning and communication through support of KNX Data Secure - Integration of 8 DALI-2 sensors (motion/presence and brightness) according to EN 62386-303 and

KNX Actuators DIN rail and gateways

Description - DIN-rail 4-way switching/dimming actuator 10 A 133 μF, KNX TP - For the control of electrical consumers with 0-10 V or 1-10 V interface - Flexible use of control and relay outputs - Control outputs suitable for active (0-10 V, source) and passive control (1-10 V, sink), as well a

KNX Actuators DIN rail and gateways

Description - *Available september 2023* - Split Unit Gateway KNX for controlling climate split devices via KNX - Easy to set up IR gateway with large database of split unit devices - Currently, over 500 different split unit devices/remote controls are available in the database and can be cont

E524 HSS UNF Taps Straight Flute

Tap tolerance: Class 2 for 2B fit Chamfer thread numbers: 1, 2 and 3 Cutting rake: 7° Flute geometry Straight flutes Surface treatment: Bright Range: No 4 - No 10, 1/4 - 1in Application: For hand or machine tapping of through or blind holes.

Raychem Application Tooling

文件：3.71106 Mbytes Page：40 Pages

Raychem Application Tooling

文件：3.71106 Mbytes Page：40 Pages

Raychem Application Tooling

文件：3.71106 Mbytes Page：40 Pages

Raychem Application Tooling

文件：3.71106 Mbytes Page：40 Pages

PRODUCT SPECIFICATION

文件：114.04 Kbytes Page：3 Pages

Screwdriver

文件：24.07 Kbytes Page：1 Pages

2.54mm FFC 连接器母端连接器

2.54mm FFC 连接器公端子

Automotive Full Bridge MOSFET Driver

Description The A4940 is a full-bridge controller for use with external N-channel power MOSFETs and is specifically designed for automotive applications with high-power inductive loads such as brush DC motors. Features and Benefits ▪ High current gate drive for N-channel MOSFET full bridge ▪ I

Automotive Full Bridge MOSFET Driver

Description The A4940 is a full-bridge controller for use with external N-channel power MOSFETs and is specifically designed for automotive applications with high-power inductive loads such as brush DC motors. Features and Benefits ▪ High current gate drive for N-channel MOSFET full bridge ▪ I

Dual N-Channel 40-V MOSFET

文件：489.32 Kbytes Page：7 Pages

24-bit Mono CODEC with Analog Direct Path

文件：1.30253 Mbytes Page：45 Pages