Industrial 15/16 (24mm) diameter 1/2 watt composition variable resistor

文件：65.84 Kbytes Page：2 Pages

Supporting the Intel Celeron processor

文件：1.3709 Mbytes Page：100 Pages

Celeron M Processor on 65 nm Process

文件：1.93023 Mbytes Page：71 Pages

HEADER STRIPS .100??Grid Solder Tail Double Row

文件：129.169 Kbytes Page：1 Pages

包装：散装 描述：CONN BANANA PLUG MINIATURE THRD 连接器，互连器件 插孔，插头

包装：散装 描述：CONN PLUG STEREO 连接器，互连器件 音频连接器

HIGH VOLTAGE PLANAR RESISTORS

High Voltage Planar Resistors 4500 Series •Voltages up to 20kV dc. •Powers up to 4.5 Watts •TCR to 50ppm/°C •Customs design service available •Planar construction gives low inductance and capacitance Application Notes The terminations should not be bent closer than 1.5m

SentriusTM BT610 I/O Sensor

Long Range Bluetooth 5 Sensors Automation / Monitoring And Control Smart Metering / Remote Sense Agricultural and Rural IoT / M2M Applications • Full Bluetooth 5 features inc. LE Coded PHY (4x Bluetooth Range) • Open development device • IP67-Certified enclosure with vent • Replaceable l

MONOLITHIC CRYSTAL FILTER (UM-1, UM-5)

FEATURES:  LOW IMPEDANCE  COMPACTNESS AND LIGHT WEIGHT  STABLE TEMPERATURE CHARACTERISTICS  OUTSTANDING VIBRATION AND SHOCK RESISTANT CHARACTERISTICS

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Shielded, Eca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with polypropylene insulation, Beldfoil® shield, LSZH jacket with ripcord, CPR Eca

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Shielded, Eca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with polypropylene insulation, Beldfoil® shield, LSZH jacket with ripcord, CPR Eca

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Shielded, Eca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with polypropylene insulation, Beldfoil® shield, LSZH jacket with ripcord, CPR Eca

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Shielded, Eca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with polypropylene insulation, Beldfoil® shield, LSZH jacket with ripcord, CPR Eca

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Shielded, Eca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with polypropylene insulation, Beldfoil® shield, LSZH jacket with ripcord, CPR Eca

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Shielded, Cca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with Low Smoke Zero Halogen insulation, Beldfoil® shield, LSZH jacket with ripcord, CPR Cca

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Shielded, Cca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with Low Smoke Zero Halogen insulation, Beldfoil® shield, LSZH jacket with ripcord, CPR Cca

TUBEAXIAL

- AC fans with external rotor shadedpole motor. Impedance protected against overloading. - Metal fan housing and impeller. - Air intake over struts. Rotational direction CW looking at rotor. Types 4890N and 4840N air exhaust over struts. - Mounting from either face using four 4.3 mm holes

AC axial compact fan

- AC fans with external rotor shadedpole motor. Impedance protected against overloading. - Metal fan housing and impeller. - Air intake over struts. Rotational direction CW looking at rotor. Types 4890N and 4840N air exhaust over struts. - Mounting from either face using four 4.3 mm holes

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Eca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with polypropylene insulation, LSZH jacket with ripcord, CPR Eca

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Eca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with polypropylene insulation, LSZH jacket with ripcord, CPR Eca

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Eca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with polypropylene insulation, LSZH jacket with ripcord, CPR Eca

Security & Sound, 2 Conductor 22 AWG BC, LSZH, Eca

Product Description Security & Commercial Audio Cable, 2-22 AWG stranded bare copper conductors with polypropylene insulation, LSZH jacket with ripcord, CPR Eca

ROTARY MOTION | PRECISION SENSOR

Features • Servo Mount / Ball Bearing • 7/8” to 2” Diameter Servo Mount • Hybrid 3, 5 and 10-Turn Precision Potentiometers

HIGH VOLTAGE PLANAR RESISTORS

High Voltage Planar Resistors 4500 Series •Voltages up to 20kV dc. •Powers up to 4.5 Watts •TCR to 50ppm/°C •Customs design service available •Planar construction gives low inductance and capacitance Application Notes The terminations should not be bent closer than 1.5m

SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER

DESCRIPTION The 4501 Group is a 4-bit single-chip microcomputer designed with CMOS technology. Its CPU is that of the 4500 series using a simple, high-speed instruction set. The computer is equipped with two 8-bit timers (each timer has a reload register), interrupts, and 10-bit A/D converte

Customer Specification

Construction Diameters (In) 1) Component 1 15 X 1 COND a) Conductor 22 (7/30) AWG Tinned Copper 0.030 b) Insulation 0.016 Wall, Nom. TPE 0.062 (1) Color Code Alpha Wire Color Code E Cond Color Cond Color Cond Color 1 BLACK 6 GREEN 11 WHITE/BLACK 2 BROWN 7 BLUE 12 WHITE/BROWN 3 RED 8 VIOLE

Customer Specification

Construction Diameters (In) 1) Component 1 20 X 1 COND a) Conductor 22 (7/30) AWG Tinned Copper 0.030 b) Insulation 0.016 Wall, Nom. TPE 0.062 (1) Color Code Alpha Wire Color Code E Cond Color Cond Color Cond Color 1 BLACK 8 VIOLET 15 WHITE/YELLOW 2 BROWN 9 SLATE 16 WHITE/GREEN 3 RED 10 W

Customer Specification

Construction Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Diameters (In) 1) Component 1 25 X 1 COND a) Conductor 22 (7/30) AWG Tinned Copper 0.030 b) Insulation 0.016 Wall, Nom. TPE 0.062 (1) Color Code Alpha Wire Color Code

Customer Specification

Construction Diameters (In) 1) Component 1 15 X 1 COND a) Conductor 22 (7/30) AWG Tinned Copper 0.030 b) Insulation 0.016 Wall, Nom. TPE 0.062 (1) Color Code Alpha Wire Color Code E Cond Color Cond Color Cond Color 1 BLACK 6 GREEN 11 WHITE/BLACK 2 BROWN 7 BLUE 12 WHITE/BROWN 3 RED 8 VIOLE

Customer Specification

Construction Diameters (In) 1) Component 1 20 X 1 COND a) Conductor 22 (7/30) AWG Tinned Copper 0.030 b) Insulation 0.016 Wall, Nom. TPE 0.062 (1) Color Code Alpha Wire Color Code E Cond Color Cond Color Cond Color 1 BLACK 8 VIOLET 15 WHITE/YELLOW 2 BROWN 9 SLATE 16 WHITE/GREEN 3 RED 10 W

PCB connectors 2.54 mm Single row / double row Solder tail

PCB connectors 2.54 mm Single row / double row Solder tail Pin connectors, solder tail With screw-machined pins ∅ 0.47 mm For corresponding receptacles see pages 36 to 42 and 47, 48

PCB connectors 2.54 mm Single row / double row Solder tail

PCB connectors 2.54 mm Single row / double row Solder tail Pin connectors, solder tail With screw-machined pins ∅ 0.47 mm For corresponding receptacles see pages 36 to 42 and 47, 48

Customer Specification

Construction Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Diameters (In) 1) Component 1 25 X 1 COND a) Conductor 22 (7/30) AWG Tinned Copper 0.030 b) Insulation 0.016 Wall, Nom. TPE 0.062 (1) Color Code Alpha Wire Color Code

Customer Specification

Construction Diameters (In) 1) Component 1 15 X 1 COND a) Conductor 22 (7/30) AWG Tinned Copper 0.030 b) Insulation 0.016 Wall, Nom. TPE 0.062 (1) Color Code Alpha Wire Color Code E Cond Color Cond Color Cond Color 1 BLACK 6 GREEN 11 WHITE/BLACK 2 BROWN 7 BLUE 12 WHITE/BROWN 3 RED 8 VIOLE

Customer Specification

Construction Diameters (In) 1) Component 1 20 X 1 COND a) Conductor 22 (7/30) AWG Tinned Copper 0.030 b) Insulation 0.016 Wall, Nom. TPE 0.062 (1) Color Code Alpha Wire Color Code E Cond Color Cond Color Cond Color 1 BLACK 8 VIOLET 15 WHITE/YELLOW 2 BROWN 9 SLATE 16 WHITE/GREEN 3 RED 10 W

Customer Specification

Construction Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Diameters (In) 1) Component 1 25 X 1 COND a) Conductor 22 (7/30) AWG Tinned Copper 0.030 b) Insulation 0.016 Wall, Nom. TPE 0.062 (1) Color Code Alpha Wire Color Code

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

HIGH VOLTAGE DC RELAY

Application Notes 1. To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.

MONOLITHIC CRYSTAL FILTER (UM-1, UM-5)

FEATURES:  LOW IMPEDANCE  COMPACTNESS AND LIGHT WEIGHT  STABLE TEMPERATURE CHARACTERISTICS  OUTSTANDING VIBRATION AND SHOCK RESISTANT CHARACTERISTICS

MONOLITHIC CRYSTAL FILTER (UM-1, UM-5)

FEATURES:  LOW IMPEDANCE  COMPACTNESS AND LIGHT WEIGHT  EXCELLENT DESIGN AGAINST SHOCK/VIBRATION  OPERATES STABLY EVEN IN WIDE TEMPERATURE RANGE

SINGLE POLE SOCKETS - SOLDER MOUNT

SINGLE POLE SOCKETS - SOLDER MOUNT

SINGLE POLE SOCKETS - SOLDER MOUNT

SINGLE POLE SOCKETS - SOLDER MOUNT

SINGLE POLE SOCKETS - SOLDER MOUNT

SINGLE POLE SOCKETS - SOLDER MOUNT

Dual 2-wide 2-input Expandable AND-OR-INVERT Gate