SPDT UltraCMOS??RF Switch

Product Description The PE4243 UltraCMOS™ RF Switch is designed to cover a broad range of applications from near DC through 3000 MHz. This reflective switch integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface, and can be controlled using either single-pin o

Double Binding Post Assembly

FEATURES: Accepts standard banana plugs Mounts in panels from 1.57 (.062) to 6.35 (.250) thick.

SPDT UltraCMOS™ RF Switch

Product Description\nThe PE4243 UltraCMOS™ RF Switch is designed to cover a broad range of applications from near DC through 3000 MHz. This reflective switch integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface, and can be controlled using either single-pin or • Single-pin or complementary CMOS logic control inputs\n• +3.0-volt power supply needed for single-pin control mode\n• Low insertion loss: 0.7 dB at 1000 MHz,\n                          0.9 dB at 2000 MHz\n• Isolation of 30 dB at 1000 MHz, 21 dB at 2000 MHz\n• Typical 1 dB compression point of +27 ;

包装：散装 描述：FUSE BLOCK CARTRIDGE CHASSIS MNT 电路保护 保险丝座

包装：托盘 描述：2.13\ 光电器件 显示器模块 - LCD，OLED，图形

保险丝座(盒)

SPDT UltraCMOS??RF Switch

Product Description The PE4243 UltraCMOS™ RF Switch is designed to cover a broad range of applications from near DC through 3000 MHz. This reflective switch integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface, and can be controlled using either single-pin o

SPDT UltraCMOS??RF Switch

Product Description The PE4243 UltraCMOS™ RF Switch is designed to cover a broad range of applications from near DC through 3000 MHz. This reflective switch integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface, and can be controlled using either single-pin o

SPDT UltraCMOS??RF Switch

Product Description The PE4243 UltraCMOS™ RF Switch is designed to cover a broad range of applications from near DC through 3000 MHz. This reflective switch integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface, and can be controlled using either single-pin o

PicoFinish® fine screwdriver

文件：55.12 Kbytes Page：1 Pages

PicoFinish® fine screwdriver

文件：55.12 Kbytes Page：1 Pages

香蕉头/鳄鱼夹

PicoFinish® fine screwdriver

文件：55.12 Kbytes Page：1 Pages

PicoFinish® fine screwdriver

文件：55.12 Kbytes Page：1 Pages

PicoFinish® fine screwdriver

文件：55.12 Kbytes Page：1 Pages

PicoFinish® fine screwdriver

文件：55.12 Kbytes Page：1 Pages

PicoFinish® fine screwdriver

文件：55.12 Kbytes Page：1 Pages

FASTON Receptacles

文件：944.84 Kbytes Page：22 Pages

FASTON Receptacles

文件：944.84 Kbytes Page：22 Pages

PicoFinish® fine screwdriver

文件：55.12 Kbytes Page：1 Pages

PicoFinish® fine screwdriver

文件：55.12 Kbytes Page：1 Pages

HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR

文件：267.49 Kbytes Page：7 Pages

Single/Dual/Quad, 1.8V/10關A, SOT23, Beyond-the-Rails Op Amps

General Description The MAX4240–MAX4244 family of micropower op amps operate from a single +1.8V to +5.5V supply or dual ±0.9V to ±2.75V supplies and have Beyond-the-Rails™ inputs and rail-to-rail output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA o

Single/Dual/Quad, 1.8V/10關A, SOT23, Beyond-the-Rails Op Amps

General Description The MAX4240–MAX4244 family of micropower op amps operate from a single +1.8V to +5.5V supply or dual ±0.9V to ±2.75V supplies and have Beyond-the-Rails™ inputs and rail-to-rail output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA o

Quad OPERATIONAL AMPLIFIER MicroPOWER, Single-Supply

文件：97.97 Kbytes Page：7 Pages

Quad OPERATIONAL AMPLIFIER MicroPOWER, Single-Supply

文件：97.97 Kbytes Page：7 Pages

10-W Low-Profile 24V-Input Isolated DC/DC Converter

文件：174.58 Kbytes Page：7 Pages